5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Hunters, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Hunters, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Hunters. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Hunters to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Hunters for you engagement or wedding.
Hunters How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To start our feature on various sorts of gemstones, we will certainly start with the finest and most well recognized gems of them all the ruby. The diamond is the supreme gemstone. It has few weaknesses as well as several staminas. It shines with its phenomenal value as well as nostalgic worth. It is utilized in wedding celebration rings to stand for limitless love or made use of as gifts/jewelry to be provided to loved ones. Yet the ruby is a lot greater than its timeless elegance.
The ruby acquires its name from the Greek work adamas suggesting unbeatable. In hardness, there is no contrast. The diamond prices in the Mohs range a 10 which is the hardest compound on Earth. Its reducing resistance is 140 times that of the ruby as well as sapphire, the gems(Corundum) that are next in the Mohs scale in solidity. The diamond's optical residential or commercial properties such as luster as well as rigidness make it one-of-a-kind as well as conveniently identified from other replicas. Take pleasure in!
* Background of Diamonds
The first tape-recorded diamond days back around 800 B.C. in India. Some think it also went back 6,000 years earlier. The diamonds were used as decorative objectives as well as as talismans to fend off wicked and also supply protection in battle. During the Dark Ages, rubies were also stated to be utilized as a medical help. Religious physicians even informed clients that if they hold a ruby in a hand as well as make the sign of the cross would certainly, it would certainly heal and also health problem and heal wounds.
Rubies became more prominent during the 19th century as a result of exploration of diamond deposits in South Africa. This exploration leads to increased supply, boosted reducing as well as polishing methods, and development in economy. In 1979, geologists discovered the Argyle pipeline in Australia which to this date is the wealthiest ruby down payment in the world. Argyle, because then, alone is responsible for providing over one third of the globe's rubies yearly.
* Diamonds: Exactly how are they formed?
Diamonds consists of an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Diamonds are generated 90 miles under the Earth's surface at temperature levels of regarding 2200 degrees Fahrenheit. Diamonds are formed deep within the planet and also eventually, over exceptionally extended periods of time, push their means to the earth's surface area, usually through volcanic eruptions.
The age of these diamonds from beneath the surface of the planet are from 1 to 3.3 billion years old! When diamonds are developed and start their climb to the earth's surface area, they undergo networks where the magma from the volcano rises to the surface area, grabbing rubies in the process and eventually transferring them on the surface, where they are at some point located and mined.
* The 4 C's of Diamonds
There are four unique features that establish the worth and also top quality of a ruby. These are the color, cut, quality as well as carat weight. Or else called the 4 C's of a ruby. In the complying with, we will speak about these attributes carefully.
In the last newsletter, we touch based on the color of gemstones as being one of the most important feature as a result of that color is the most obvious feature. The perfect ruby ought to show up clear as well as colorless however this is not the case for all rubies. Diamonds can can be found in any shade of the rainbow most common shade is a shade of yellow or brownish. The Geological Institute of America(GIA) have created a standard to grade diamond shade. This standard includes a lettering system that varies from the alphabet D - Z. Please see listed below:
D E F No Color G H I J Virtually Anemic K L M Faintly tinted, cannot rarely be seen and also typically yellow in color N O P Q R Gently tinted, usually yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins with yellow as well as proceeds to brown
The cut a ruby is determined by the diamond's percentage such as its shape, size and depth. The cut determines exactly what is called the diamond's "luster". Also if the diamond itself has excellent color and also quality, with an inadequate cut the ruby will have a boring luster. This is since the cut establishes just how light trips within the ruby. The Gemological Institute of America has actually also created a clearness grading system to rank ruby clarity. This grading system includes Flawless (Fl), Inside Remarkable (IF), Really Extremely Somewhat Consisted Of (VV1 or VV2), Extremely Somewhat Consisted Of(VS1 or VS2), Somewhat Included(SI1 or SI2), as well as Included(I1, I2, and I3). Although this system had actually been added to the diamond sector, it is not commonly used. This results from that it took a great deal of method as well as training to incorporate it.
The cut a diamond is identified by the ruby's proportion such as its shape, size as well as depth. The cut determines what is called the diamond's "radiance". Also if the ruby itself has excellent shade and also clearness, with an inadequate cut the diamond will have a dull brilliance. This is because the cut determines how light journeys within the diamond.
There are 3 kinds of cuts that can identify the diamond's brilliance. These are a shallow cut, a cut that is unfathomable and also ideal cut. A superficial cut is a cut of a diamond that is also low, that light taking a trip with it is shed on the bottom of the stone as well as does not come back into view. This cut makes a ruby show up lifeless and dull. A cut that is too deep is a cut that is too expensive, that light traveling via it runs away via the sides as well as dims the stone. An excellent cut is a perfect cut on a diamond that shows light to the top of the rock, offering it excellent brilliance.
As mentioned on the last newsletter, a solitary carat weight(ct) evaluates regarding 200 milligrams or.2 grams. For smaller sized carat weight diamonds that weigh less compared to a carat weight, it is revealed as factors (pt). Points are 1/100 of a carat. Carat weight of a ruby is vital as a result of that bigger rubies are rarer compared to smaller ones, so generally the larger the diamond the extra expensive it is. There is no typical grading system or representation that can reveal various carat weight. This is due to the fact that there are so many variations of rubies fit and cut, which makes rocks of comparable weight, look various.
* Replica Diamonds
Because diamonds are the most valuable and also rarest of all the gems, initiatives have been made to replicate or perhaps boost rubies utilizing more economical choices. A great deal of times, truthful mistakes have been made as well as these choices or various other gems such as spinel were in some cases puzzled with actual diamonds. In many cases, some deceitful people aim to sell these options to misfortunate buyers in order to profit. Listed below we will certainly review regarding these choices and methods to recognize them.
* Synthetic Diamonds
Artificial diamonds are rubies that are expanded manufactured in a research laboratory. The very first recognized cases of ruby synthesis were asserted to be documented between 1879 - 1928, but this was never ever confirmed. It wasn't up until the 1940's where study started in the USA, Sweden, Soviet Union started researching. Synthetic diamonds are or else referred to as High Pressure Heat (HPHT) rubies or Chemical Vapor Deposit (CVD) diamonds. The name of both these synthetic rubies derives from the processes made use of to develop them. A few of these artificial diamonds might either have better, lesser or comparable attributes compared to that of a diamond. Consequently, these artificial rubies are made use of for abrasives, cutting and also polishing devices, as well as switches over in power stations.
Simulants are non-diamond substances that are utilized to replicate the appearance as well as the form of a diamond. One of the most basic and well recognized simulant is cubic zirconia (CZ). CZ at simple sight could glimmer greater than a ruby as well as it is much less dense, indicating that a 1 carat weight CZ will be a lot bigger compared to a 1 carat weight diamond. Nowadays, a much more popular simulant is moissanite, which has just the same attributes of a diamond. These qualities consist of solidity (Moissanite-9.25 and also diamond-10 in Mohs scale), refractive index(Moissanite -2.65 as well as diamond -2.42) and dispersion (Moissanite -.104 as well as diamond -.044). This makes it tough to set apart the 2 at plain sight and would typically need testers to discriminate. In the following section we will certainly go over how you can determine moissanites and also various other imitations.
* Actual or Phony?
An old technique of identifying diamonds is to do a scratch test. This requires scratching a diamond with an additional ruby which is destructive and also is rarely made use of nowadays. The very best and also most reliable means to evaluate for rubies is to use testers that make use of thermal conductivity. These testers contain battery powered thermistors installed with a retracting copper pointer. This tester works by injecting the warmth into the tested stone and also then the device gauges the amount of heat that it conducts. Nonetheless thermal conductivity testers works best to differentiate rubies and its other simulants, it will certainly not aid differentiate laboratory produced or artificial stones. To be able to recognize these, certain optical techniques are needed. Laboratories make use of techniques such as spectroscopy, microscopy and luminescence in order to establish a particular rocks origin. The typical person can make use of loupes and also microscopic lens to identify artificial stones. All-natural diamonds normally have minor flaws and also defects such as inclusions or some kind of international product, which will not be found in synthetics.
What You Should Know When Buying a Diamond Ring
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.