Blue Engagement Rings in Waipahu

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Waipahu, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Waipahu, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Waipahu. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Waipahu to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Waipahu for you engagement or wedding.

3 stone diamond ring yellow gold

Waipahu How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Interaction rings are offered in a selection of designs, stones, cuts as well as shapes. Among all the sorts of rocks utilized in involvement rings, diamonds are the most precious and suitable ones. Their sparkle absolutely has the capacity to win a lady's heart. There is a remarkable collection of diamond engagement rings readily available in the market. A few of the rings are designer productions, which are made according to the client's option. They can additionally be called customized ruby involvement rings. Some of the jewelers offer the clients with the ability of skilled designers to bring magic to the otherwise normal features as well as forms.

Designer ruby interaction rings are not only developed inning accordance with the choice of client however likewise fit their spending plan. These rings are economical, as as compared to the other ruby involvement rings. The buyers can pick their very own ring settings as well as match the diamonds, to develop an unique item of precious jewelry for loved ones. The majority of the designer diamond involvement rings are made in white gold, yellow gold and platinum. Apart from the setups and ruby choice, there are a number of other information that play an important role in designing a ring. Apart from picking a specific design, it is crucial for the purchasers to keep in mind the various combinations of styles. The width, thickness and also precise size of the rings are also crucial as well as have to be thought about while making a ruby engagement ring. Many of these rings take about 6 to 8 weeks to be made.

Developer diamond involvement rings are extremely good options, contrasted to the readymade rings conveniently offered. These rings offer more fulfillment to the purchasers and also are unique, owing to the individual touch. They give the buyer to work with the design and choice of rock and personalize the production.

wedding bands

What You Should Know When Buying a Diamond Ring


Not all vendors offer diamond grading laboratory reports (aka ruby high quality reports) to their consumers. So my basic recommendations to you is to maintain your cash in your pocket when handling such jewelers.

Just acquire a ruby interaction ring if it features the initial ruby high quality record.

A lab report is an independent evaluation of the 4Cs of a loosened ruby and also consists of an outlined representation of the rock's quality attributes and also a graphic representation of the rock's proportions. Having such a report enables you to compare rubies of various qualities and also ultimately assists you make an even more notified getting choice.

A retailer might cut edges and also not give a lab report or a dishonest vendor could provide a fake one due to the time, difficulty and also expense he'll birth to getting a stone graded.

Yeah - there is a rate for rating a ruby (though that expense is eventually paid by the customer), plus the delivery and also insurance costs for sending the ruby to the lab. As well as let us not fail to remember the chance cost of a jeweler not having the diamond in his shop available for a few weeks while the grading occurs.

Nevertheless, a ruby rating record may also not be available since the prices to obtaining one may impact as well greatly on the final cost of the ring. As an example, a 0.3 ct diamond ring costing $250 say, may set you back around $75 to be rated and have the report number etched on the girdle on the diamond. As you browse for that perfect diamond engagement ring for your sweetheart, you'll find that there is an alphabet soup of labs asserting to provide credible diamond rating reports. However I would just place my money on ...

The Premier Diamond Grading Lab Information

Yes, all diamond high quality records are not developed equal. Within the market, it is an agreement that the 2 leading laboratories are GIA-GTL (Gemological Institute of America's Treasure Profession Laboratory) as well as the AGS (American Gem Society Laboratories).

The GCAL (Treasure Accreditation as well as Guarantee Lab) also supplies extremely concerned records or "diamond certificates" as they are described by GCAL. The GIA has the toughest international online reputation for self-reliance and consistency. Due to their consistent color and also quality strictness standards, the globe's largest as well as most costly diamonds have actually been sent out there for grading years. In 2006, GIA-GTL included a two-dimensional cut grading system for round great rubies.

AGS makes use of the strictest cut standards in the market. It makes use of a three-dimensional light performance metric that can grade several diamond shapes. In truth, it is the only cut grading system that is identified by the scientific area.

Exactly what is more, its Diamond Quality Record utilizes an one-of-a-kind and also exclusive 0 to 10 grading system to assess the 4 Cs - a system which is simpler to understand compared to GIA's grading system. In reality, AGS even goes the additional step by corresponding their 0-10 rating scale to other types of score. For instance, the standard VS1 ruby clarity rating is a 3 on the AGS Ruby High Quality Record.

Diamond Coverage - The Drawbacks

1. Ruby grading is not standard or regulated and hence you could come throughout tier 2 laboratories that use looser standards to the tier 1 grading laboratories mentioned above. If you acquire a ruby that has been rated by a rate 2 lab, you might wind up paying more for a lesser high quality diamond. So as an example, a ruby ranked a "F" in color at a tier 2 laboratory may obtain a G, H, or reduced shade score at an extra respectable lab. The industry also marks down diamonds rated by lesser well-known laboratories by regarding 15-30% or more. So either you just get a diamond graded by a tier 1 laboratory or you accept that you may be purchasing a minimal top quality ruby compared to just what is stated on the record if that diamond is rated by a minimal recognized laboratory.

2. Lots of huge chain shops have huge agreements with lesser recognized laboratories with "softer" diamond grading standards. A few of these softer labs placed "suggested substitute values" on the lab reports - worths which are greater compared to what shops plans sell the diamonds for. So a salesperson in a chain store may say to you, "Consider the good deal you are obtaining right here. We are selling you this ruby involvement ring for $2500 yet the record says that the recommended replacement worth is $4000." Wow - just what a bargain - NOT! This is why it is much better that you rely on only independent rate 1 labs.

Also bear in mind that trusted diamond rating reports are not evaluations and do not supply evaluation figures. Ruby evaluations are often grossly inflated as well as are not something you'll intend to depend on.

3. Ruby reports are filled with disclaimers that specify that nothing is "accredited" or ensured which the laboratories are not liable for mistakes. As a matter of fact, the GIA uses a disclaimer of types on their web site relating to the use of the word "accredit." The website says:

"It is inaccurate to state that trainees, graduates, their organisations, or specific gems are "licensed" by GIA. The Gemological Institute of America does not license anybody or anything. Neither a student nor a graduate who has actually been awarded a certification or diploma, nor a treasure which has actually been graded or identified by GIA has actually been accredited by GIA".

So it is feasible that you the consumer is left holding the bag ought to an error in a record is later on uncovered. Courts have frequently ruled that sellers, not laboratories, are liable for such mistakes. Why? Because the laboratories showed ahead of time that their records could not be held liable.

Thankfully, there are a pair means to give yourself extra customer security:

A. You can fly to India where jewelers use a lifetime buyback plan to their clients. Also expensive to fly?

B. You might find one of the 20% of US jewelry experts who sell fully bonded diamonds. These are rubies that are marketed with life time breakage, lifetime trade-in as well as life time buyback policies.

C. Not as good a treatment as purchasing a totally bound diamond but you might acquire a diamond that comes with a real "certificate" and also not a report. "Certified rubies do come with warranties" albeit for much shorter periods.

Accreditation Some sellers refer to a "ruby report" as a "certified ruby" however technically this is not deal with. From a legal point ofview, a diamond record is a simply a skilled opinion though in reality, elements of a diamond rating report are not simply viewpoints.

For example, a ruby's carat weight (weight) could be properly identified as well as its cut grade by determining its optical performance or by describing a computer design. A certification on the other hand is a statement of fact - a paper for which the issuer approves legal obligation and also will make restitution to the customer for errors.

Some leading ruby grading laboratories provide both reports and certifications. AGS provides Ruby Top quality Files (non-certified records) and Ruby Top quality Certificates. Diamond Top quality Certifications are prepared exclusively for AGS retail jewelry experts and also supplies guaranties from getting involved American Gem Culture participant stores.

GCAL accredits it's ruby grading likewise. Its 100% money-back guarantee plan is valid for a duration of 2 years from the day on the relevant certificate. This plan makes certain the precision of the cut, shade and also clarity qualities and the carat weight.

A report or certification need to will certainly have a number on it that might or may not be etched on a ruby. You will certainly be able to enter that number on the site of the licensing lab to check a record's legitimacy.

Aspects Of A Diamond Grading Record Ruby grading reports are always evolving yet certain component ought to stay the same. For example, the:

The Record #. This number is offered as well as tape-recorded in a laboratory's record and also may or might not be inscribed on a diamond's band. You could enter the report number on a rating lab's website to inspect the authenticity of the diamond quality report or to get even more information about the diamond. Shape & Aspect Style: This is the summary as well as the cutting style utilized for the element plan. There are 3 fundamental facet designs - "fantastic cut, step cut as well as combined reducing style" and also 12 standard shapes that include notables such as round dazzling and also princess cut" diamonds.

Dimensions: This describes dimension (not weight) of a diamond. Size consists of measurements such as size, size, weight as well as size. A measurement is commonly listed to the hundredth of a millimeter. Dimensions play a big duty in just how a ruby glows.

Carat weight Weight: The weight of a diamond is measured to the hundredth of a carat weight and also some also give such procedure to the thousandth of a carat (1.123 ct.). Carat weight is the most objective and also the most convenient to understand of the 4Cs because all one needs to do is weight the stone. Shade Quality: This tells you the degree of color absence in the diamond. The much less color the higher the quality.

Rubies are commonly graded from D-Z; the closer to "D" the whiter the diamond. You must never see ruby color array such as (G-H, I-J-K, and more) on a ruby record. You must only see color ranges on assessments for stones that are installed.

Clearness Grade: Basically every diamond has inner blemishes called inclusions and also outside blemishes called imperfections. A ruby is graded inning accordance with the size, type, location and also amount of these flaws.

Clarity grades range from Remarkable (FL) - Included. Labs make use of a couple experts to quality the quality of a ruby in order to develop a more exact reading.

Cut Quality: A lot more recent diamond records include a cut grade for conventional round fantastic diamonds. Cut takes into account the sparkle, fire and also scintillation of the ruby. Cut quality ranges from Superb - Poor.

Other components you could stumble upon on a ruby report include the gloss, symmetry, fluorescence and percentage. Armed with this details, you are much better able to earn an analysis of the quality of diamond that is mounted in an engagement ring.


Jewelry Stores Near Me in Hawaii