Wedding Sets in Sekiu

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Sekiu, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Sekiu, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Sekiu. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Sekiu to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Sekiu for you engagement or wedding.

white gold diamond necklace

Sekiu How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Getting a diamond engagement ring is quite a deserving purchase every guy should be fortunate adequate making. Some that do not actually recognize way too much about precious jewelry and also diamonds may really feel as if they must just go to a shop and also select a ring which looks attractive to them. Although this may work, there are far better ways to choosing the most effective possible kind of diamond interaction ring for your loved one. The adhering to will list the top 10 tricks to purchasing a ruby engagement ring.

Look around

Perhaps one of the finest keys to remember if you remember absolutely nothing else from this checklist is to go shopping around. Purchasing a ring of this kind on a whim will certainly more than likely not lead you to the most effective deal or the very best ruby. Therefore, take your time when buying an involvement ring, look around as well as see what is available to be acquired.

You Can Locate a Stunning Diamond Interaction Ring on Sale

You ought to likewise recognize the fact that you are able to find a charming ruby involvement ring with a beneficial price connected to it. This is not to claim that you should limit your options only to sale items however always really feel complimentary to read the sale counter when searching for an interaction ring to provide to your future fiancée. Do ensure that it is a legit sale as well as not one that runs all the time.

Dimension of the Ruby Actually Does Not Issue

Another key when it involves buying an involvement ruby ring is that the carat weight size of the ruby is not actually exactly what issues when all is said and done. Although some could assume that a larger diamond amounts to a much better ruby this is commonly not the case as cut, shade and also clearness all have to be taken into consideration along with the carat weight of the stone.

Purchasing Online Is an Alternative

With today's technology, you could buy almost anything on-line and also the same is true for ruby engagement rings. For those who like the suggestion of an on the internet acquisition, there are plenty of web sites which use ruby rings to buy and could supply rather a great deal as well. Just be specific to get documents stating the real high quality of the ring. The on the internet organisation must have a 30 day cash back guaranty without concerns asked.

Purchasing the Ring with Wedding Celebration Bands Can Save Money

You may also locate that if you are in the market for not just an interaction ring but wedding bands also, buying all these items together can save you cash. Specific ring designers will certainly create engagement rings with matching wedding bands which you can buy as a set.

White Gold Looks Like Platinum However Is Much Less Costly

If your liked one suches as silver-tone precious jewelry yet you are unable to afford a platinum diamond engagement ring, consider buying one made from white gold. White gold is a good choice as it resembles platinum but is much more economical.

Precious Jewelry Stores Often Have 1 Or 2 Sales Throughout The Year

An additional secret to purchasing a ruby involvement ring is that many precious jewelry sellers use sales throughout the year. Some are vacation sales whereas others are a way for the fashion jewelry store to get rid of the old supply to make space for brand-new products entering the store.

Getting the Ruby and also Setting Separately Can Save Loan

You could additionally discover that acquiring the diamond and setting separate from one another could conserve you some money. It additionally permits you to choose specifically the kind of ring that you desire and also be able to see it prior to the rock is set.

Buying a Small Carat Dimension with Baguettes Is In Some Cases a Better Offer

If you are browsing for a diamond involvement ring with a great deal of glimmer however you are incapable to pay for a big carat diamond, think about getting a smaller sized ruby but add baguettes to the ring. This will certainly include sparkle as well as shine and also not cost as high as a bigger diamond could set you back.

Think About Little Jewelry Stores Which Deal Personalized Service

For those that are looking for a fashion jewelry shop which will certainly give personalized solution, you might desire to purchase the diamond involvement ring for your enjoyed one at a small fashion jewelry store. These fashion jewelry boutiques are frequently run by the specific proprietor who will do every little thing possible to make your interaction ring shopping journey magnificent.

white gold tennis bracelet

What Are Shade Boosted Diamonds and also Are They For You?

Sekiu

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

___________________________________________

Vintage Wedding Rings in Washington

Wedding Rings For Women Princess Cut in Sekiu

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Sekiu, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Sekiu, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Sekiu. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Sekiu to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Sekiu for you engagement or wedding.

10 ct ring

Sekiu How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To start our attribute on various sorts of gemstones, we will begin with the finest as well as most well recognized gemstone of them all the ruby. The diamond is the utmost gems. It has really couple of weak points and many strengths. It shines with its extraordinary value and also nostalgic worth. It is used in wedding event rings to represent countless love or made use of as gifts/jewelry to be provided to enjoyed ones. Yet the ruby is a lot even more compared to its timeless charm.

The diamond derives its name from the Greek work adamas suggesting irresistible. In solidity, there is no contrast. The diamond rates in the Mohs scale a 10 which is the hardest material on Planet. Its reducing resistance is 140 times that of the ruby and also sapphire, the gems(Corundum) that are next in the Mohs scale in firmness. The ruby's optical homes such as radiance and rigidness make it distinct and also easily identified from various other replicas. Appreciate!

* History of Diamonds

The first tape-recorded diamond dates back around 800 B.C. in India. Some believe it also dated back 6,000 years earlier. The diamonds were used as decorative purposes and as amulets to fend off wicked and also offer defense in battle. During the Dark Ages, rubies were also stated to be used as a medical aid. Religious doctors also told people that if they hold a ruby in a hand and make the indication of the cross would certainly, it would treat and ailment and also recover injuries.

Rubies ended up being more popular during the 19th century as a result of discovery of ruby down payments in South Africa. This exploration brings about raised supply, enhanced cutting as well as brightening techniques, and development in economy. In 1979, geologists discovered the Argyle pipe in Australia which to this date is the wealthiest ruby deposit worldwide. Argyle, since then, alone is accountable for providing over one third of the globe's rubies annually.

* Diamonds: Exactly how are they formed?

Diamonds consists of an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Rubies are created 90 miles under the Planet's surface area at temperature levels of concerning 2200 levels Fahrenheit. Diamonds are developed deep within the earth and at some point, over incredibly extended periods of time, press their means to the earth's surface, normally with volcanic eruptions.

The age of these diamonds from under the surface area of the planet are from 1 to 3.3 billion years of ages! When diamonds are created and begin their climb to the earth's surface area, they experience channels where the magma from the volcano climbs to the surface area, selecting up rubies along the method and ultimately transferring them externally, where they are ultimately found as well as mined.

* The 4 C's of Diamonds

There are 4 unique qualities that establish the worth and also quality of a ruby. These are the shade, cut, clarity and carat weight. Or else referred to as the 4 C's of a ruby. In the following, we will speak about these attributes carefully.

* Shade

In the last newsletter, we touch based on the color of gemstones as being one of the most essential feature because of that shade is one of the most evident function. The best ruby must show up clear and anemic yet this is not the case for all diamonds. Diamonds can be available in any kind of shade of the rainbow most typical color is a color of yellow or brown. The Geological Institute of America(GIA) have actually devised a standard to grade ruby shade. This guideline is composed of a text system that ranges from the alphabet D - Z. Please see listed below:

D E F No Color G H I J Virtually Colorless K L M Faintly tinted, can not hardly be seen and also usually yellow in shade N O P Q R Gently tinted, typically yellow. Can be seen with the nude eye S T U V W X Y Z Tinted, begins with yellow as well as progresses to brown

* Clarity

The cut a ruby is figured out by the diamond's percentage such as its shape, width and depth. The cut establishes what is called the diamond's "luster". Also if the ruby itself has best color and also clearness, with an inadequate cut the diamond will certainly have a plain brilliance. This is since the cut identifies just how light travels within the diamond. The Gemological Institute of America has actually likewise developed a quality grading system to rank ruby clarity. This grading system consists of Perfect (Fl), Internally Perfect (IF), Extremely Very Somewhat Consisted Of (VV1 or VV2), Extremely Slightly Consisted Of(VS1 or VS2), A Little Consisted Of(SI1 or SI2), as well as Consisted Of(I1, I2, and I3). Although this system had been added to the ruby industry, it is not widely made use of. This is because of the reality that it took a great deal of practice as well as training to incorporate it.

* Cut

The cut a diamond is figured out by the ruby's proportion such as its form, size and depth. The cut establishes what is called the diamond's "luster". Also if the ruby itself has excellent color as well as quality, with a poor cut the diamond will certainly have a boring radiance. This is due to the fact that the cut identifies just how light travels within the ruby.

There are 3 types of cuts that can determine the ruby's luster. These are a superficial cut, a cut that is also deep and also suitable cut. A shallow cut is a cut of a ruby that is too low, that light traveling via it is shed under of the rock and does not come back into sight. This cut makes a ruby appear drab and also dull. A cut that is also deep is a cut that is expensive, that light traveling with it gets away with the sides and also darkens the rock. A suitable cut is an ideal cut on a ruby that reflects light to the top of the stone, offering it best luster.

* Carat

As mentioned on the last newsletter, a single carat(ct) considers regarding 200 milligrams or.2 grams. For smaller carat rubies that evaluate less compared to a carat, it is shared as points (pt). Points are 1/100 of a carat. Carat weight of a diamond is necessary because of the reality that larger diamonds are rarer than smaller ones, so primarily the larger the ruby the more pricey it is. There is no basic grading system or diagram that can reveal different carat weight. This is because there are so lots of variants of rubies fit as well as cut, which makes stones of comparable weight, look various.

* Replica Diamonds

Given that diamonds are one of the most useful and rarest of all the gemstones, efforts have actually been made to duplicate or also boost rubies using less expensive alternatives. A whole lot of times, truthful errors have actually been made and also these options or other gemstones such as spinel were in some cases perplexed with actual diamonds. In many cases, some unethical people attempt to sell these alternatives to misfortunate purchasers in order to profit. Below we will review concerning these options as well as methods to identify them.

* Artificial Diamonds

Artificial diamonds are rubies that are expanded manufactured in a research laboratory. The initial well-known cases of ruby synthesis were declared to be recorded in between 1879 - 1928, but this was never ever confirmed. It wasn't up until the 1940's where research study started in the USA, Sweden, Soviet Union started looking into. Synthetic diamonds are or else known as High Stress Heat (HPHT) diamonds or Chemical Vapor Down Payment (CVD) rubies. The name of both these artificial rubies originates from the processes made use of to produce them. A few of these artificial diamonds can either have greater, lower or similar features compared to that of a ruby. Consequently, these artificial rubies are made use of for abrasives, reducing as well as polishing tools, as well as changes in power plant.

* Simulants

Simulants are non-diamond materials that are used to reproduce the appearance as well as also the shape of a diamond. One of the most standard and popular simulant is cubic zirconia (CZ). CZ at ordinary view could glimmer even more compared to a diamond and it is less dense, meaning that a 1 carat weight CZ will certainly be a lot larger compared to a 1 carat diamond. Nowadays, a more popular simulant is moissanite, which has all the exact same characteristics of a diamond. These features consist of firmness (Moissanite-9.25 as well as diamond-10 in Mohs range), refractive index(Moissanite -2.65 as well as ruby -2.42) as well as diffusion (Moissanite -.104 and diamond -.044). This makes it hard to separate both at plain view and also would commonly need testers to discriminate. In the following section we will certainly talk about how you can determine moissanites as well as various other imitations.

* Real or Phony?

An old method of determining rubies is to do a scrape examination. This calls for scratching a ruby with another ruby which is harmful and is hardly ever made use of nowadays. The most effective and also most trustworthy way to examine for diamonds is to make use of testers that utilize thermal conductivity. These testers contain battery powered thermistors placed with a retractable copper suggestion. This tester functions by infusing the heat into the tested rock and after that the tool measures the quantity of warmth that it conducts. However thermal conductivity testers works best to identify diamonds and its other simulants, it will not assist identify laboratory produced or synthetic stones. To be able to recognize these, particular optical methods are needed. Laboratories make use of strategies such as spectroscopy, microscopy as well as luminescence in order to identify a particular rocks origin. The ordinary individual could make use of loupes and also microscopes to distinguish artificial rocks. All-natural diamonds usually have minor imperfections and also defects such as inclusions or some sort of international material, which will certainly not be found in synthetics.

heart shaped wedding sets

How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Sekiu

There are a variety of styles of involvement rings of 2018 that are incredibly trendy. Every little thing from pave diamond rings and also colored stones to "eco-friendly" rings and channel established ruby rings became incredibly popular in 2018.

Pave diamond rings are rings with three or four rows of small, even-sized diamonds that normally go around the whole ring. A bigger center stone established over the remainder of the ring finishes the appearance. Lead diamond involvement rings are one of the most effective engagement rings of 2018 since they are a sophisticated selection for an engagement ring while creating a lot of glimmer on a soon-to-be bride's ring finger. You'll likewise find lead ruby wedding bands that match your engagement ring and also make it much more sparkly.

Colored rocks have also grown in popularity. As a result of this, rings with colored diamonds are amongst the most effective engagement rings of 2018. Rubies come in a selection of colors, including yellow, blue, pink, or even black. Real tinted diamonds are incredibly rare, that makes them extremely pricey. A one-carat colored ruby can run upwards of ten thousand dollars. Nevertheless, if you can not pay for to invest this much cash on an involvement ring, there are a few options that will certainly still allow you to be fashionable with a colored rock. With the most up to date technology, you could acquire a synthetic tinted diamond. With the advancements that have actually been made, the majority of people could not tell the distinction between an extracted ruby and also a synthetic one. If you get or commission a man-made ruby, you can select whichever color you prefer, as well as save numerous hundreds of dollars in the meantime. Additionally, if you desire a colored stone but don't need a ruby, emerald greens, sapphires, and rubies make wonderful choices for interaction rings and also are far less costly than mined tinted diamonds.

Green interaction rings are likewise amongst the very best involvement rings of 2018. With even more individuals concerned regarding the atmosphere as well as concerning the civils rights problems that surround traditional ruby mining, even more people are looking for choices to traditional interaction rings. One opportunity is to get an interaction ring that has a ruby that was extracted in Canada instead of South Africa. Canada does not have the very same human civil liberties concerns rotating around its diamond market, so it's considered to be extra friendly to the world. Alternatively, purchasing a synthetic ruby ring is additionally taken into consideration to be extra "eco-friendly" because not only does it not have the exact same civils rights problems that extracted rubies do, yet it does not damage the earth like mining for diamonds tends to do. Alternatively, the most effective interaction rings of 2018 consist of antique involvement rings since the greenest involvement rings are those that are reused as well as recycled. By purchasing an interaction ring that is antique, you are not adding to the brand-new ruby ring market or the destruction of the environment.

Channel established ruby rings are also on the listing of finest interaction rings of 2018. Network set engagement rings have the rocks set within the band of the ring, so the top of the rock is even with the top of the ring. Channel established rings are specifically ideal because the diamonds are secured from being damaged since you can not reach the stone to chip them. Much more preferred are network collection diamond rings constructed out of platinum, which has just recently grown in popularity. If you wish to purchase a ring that is much more special, though, you can have a channel collection involvement ring established with stones besides rubies. Sapphires are a specifically prominent selection for involvement rings.

___________________________________________

Vintage Wedding Rings in Washington

Platinum Wedding Rings in Sekiu

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Sekiu, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Sekiu, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Sekiu. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Sekiu to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Sekiu for you engagement or wedding.

1 ct tw earrings

Sekiu How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

diamond rings

Beginning With the Essential When Fascinated in Purchasing Ruby Fashion Jewelry.

Sekiu

You have been dating the person of your desires for rather some time now. You could or may not be remaining together as a pair, either of the two has its very own partnership issues; if you do not live as a couple, the feeling of isolation that rises through your heart each time your partner states the words "excellent bye" after a charming day well invested together inspires you to do even more and each time you turn mistakenly to show him or her your feelings, the void that greets you, rapidly transforms your ideas to do even more right into a willpower to do more now! For those who have actually taken their partnerships an action further by moving in with each other.

Because of the isolation felt each time a companion says good bye, various kinds of stress as well as sensations embeded in they can be the should make your love official for the whole globe to see or you both wish to begin a secure household. Whatever inspires you right into lastly making the very first step to the most essential dedication you would ever before make in your whole life could not be off relevance yet the symbol which you should give while taking this action is of the utmost significance - "The Involvement Ring".

Today acquiring an involvement ring has currently end up being the standing quo of determining yourself as one who is currently taken and all set for marriage however have you ever played with the rock or band on your hand and thought about its background? Considering that it's not specified in the holy bible or the earliest papers that provide thorough accounts of practices before marriage in time passed.

The popular involvement ring of the modern age had its beginning as current as the 19th century and also had not been constantly a symbol of undying affection, it was basically the first component payment of the bride cost to be paid to the bride's family members yet turned over and put on by the bride. It was a kind of insurance offered the woman, in situation the potential companion which was always the man at that time dissolves the marriage thereby endangering the woman's virtue as well as attract other men.

Truth meaning and icon of the engagement ring started shining through in the 20th century, when guys offered their fiancées a band that symbolized their love and also intents for a marital relationship union, the engagement ring symbolized that she had been taken, from restrictions and also all set to be wed to her real love and it was positioned on the 4th finger of the left hand, for that finger was thought to have a vein going through it which came straight from the heart therefore symbolizing the finger as a "heart finger". Earlier rings can just be an item of silver or an iron band with no adornment, which the woman inserts into her 4th finger on her left hand, this was the technique for a short time till commercial rings and the media took control of the interaction scene. The Adverts shown on engagement rings in the center of the 19th century suggested that men ought to invest no much less than 2 months of their month-to-month earnings to purchase the ideal ring for his precious bride to be and also simply with an advert the meaning and also style of the interaction ring took a new instructions. The modern-day interaction ring is a sign that reveals that an individual is engaged to be wed with design. The cut, pricing and construct from the engagement ring although not all crucial, adds a particular flavour to your interaction day or event as well as has spurned a new jewelry market all on its very own. The Interaction ring currently is available in different designs; maybe a band made of precious materials such as Gold, Platinum or Silver or maybe a band laced with gem rocks to give a tempting elegance to the ring. The various significant layouts of involvement rings will be reviewed below.

Different Sorts Of Interaction Rings

Solitaire rings; these are the essential timeless involvement rings, the jewelry ring contains a band and also a gem stone; the band might be made from any kind of material of your selection ranging from gold to platinum while the gemstone must likewise be decided to fit your strange attributes, maybe diamonds or pearl cut in different manner ins which would be explained listed below.

Interaction Rings with Side rocks: These charming rings are made with gems placed right into the sides of the band, which can be made of any steel material depending upon your preference. Some side rocks call likewise had a main stone at the center. The popular gemstones made use of for this layout of rings are normally rubies yet you could personally personalize your gems to the preference of your love.

The 3 Stone Rings or the Trinity ring: this is a ring layout with its very own romantic history, it is believed that each stone in the 3 rock ring symbolizes the past, existing as well as future of the time in which a pair has spent together and the ring would bind them together for all endless time. The ring layout is that of an immaculate platinum band with three elegant gemstones; one at the middle with two place tactically by the sides. The gems are generally mad of rubies however you are enabled to personalize your own into three various kinds of gems if you so need.

The Matching Wedding Set: this is an attractive mix of both the involvement ring and the real wedding event band, there is no set layout on exactly how a matching wedding collection must look like but it is normally good to have either the involvement ring or the wedding celebration ring accentuating the various other and the other way around I.e. a splendid platinum interaction ring with a gems must be paired with an easy Gold classic wedding celebration band, supplying the new bride with a touch of colour. Tension Rings: allow the name not serve as a barrier to you when thinking about the stress ring for it is among those styles we call basic however forever classy, it consists of a band made from any type of product of your selection, securely holding a gemstone in its hold with pressure i.e. the gemstone is not held by prongs however clasped in between the 2 sides of the band material you selected. The band material acts as its holding support. It is extremely suggested you opt for two contrasting colours for the band and the gemstone to highlight the real charm of the stress ring.

The Different Cuts of Gems

The Pillow cut: this approach of cutting a gemstone, gives the stone a timeless shape that is between a rectangular shape as well as an oval, it is among the most popular jewellery cuts as well as it's likewise referred to as the antique cut.

The Marquise cut: the method employed in reducing the shape of the marquise cut gives the gemstone an oval shape in the center with ends. This ring has a classic elven or should I claim earthy appearance that draws out the supernatural beauty in your new bride.

The Emerald cut: the emerald treasure normally has its own specified shape as well as this cut approach clearly mirrors it, the emerald cut is a rectangular cut with chopped corners extending at its 4 ends.

The Asscher cut: this approach of cutting the gems offers it a shape individuals claim is comparable to the emerald rectangular shape but it is much more octagonal fit than rectangular shape, the octagonal shape aids it capture light as well as show it in different directions. It's a completely lovely cut for a rings gems.

The Princess cut: this is one of the most previously owned cuts on gemstones, it is square in form as well as aids bring out the appeal of the gems utilized rather demurely. The Round cut: this cut basic looks round but its more than that for it has various spikes contributed to its surfaces making it one of, if not one of the most radiating gems cut of the lot, it is known among ladies for its ability to blind the eye (shimmer).

The Heart cut: perfect for the romantics at heart and also shaped to belly their hearts, it is a straightforward as well as classy cut that is rather prominent among women. After giving a general expose on interaction ring styles and cuts, the following step is to give your notification the leaders in the sector that gives you with the most effective and also most pricey rings- in some situations- available.

Costs Barnes: the manufacturers of a few of the most charming and also expensive involvement bands available. Tiffany: everyone knows the name Tiffany this designer home additionally gives clients with top of the range rings and also costs postpone. Tacori: the Tacori style is additionally among one of the most sought after interaction rings in the jewellery market the cut and arrangement of its layouts are always a pleasure to behold.

In selecting a ring your budget plan must also enter play so either you purchase Tiffany's or an ordinary involvement ring, it's the thought that counts.

___________________________________________

Vintage Wedding Rings in Washington

1 Ct Tw Earrings in Sekiu

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Sekiu, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Sekiu, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Sekiu. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Sekiu to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Sekiu for you engagement or wedding.

bezel set diamond earrings

Sekiu How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To begin our attribute on various kinds of gemstones, we will certainly start with the finest and most well understood gems of them all the ruby. The diamond is the supreme gems. It has very few weak points and also numerous strengths. It glows with its extraordinary worth and sentimental worth. It is used in wedding event rings to stand for countless love or made use of as gifts/jewelry to be offered to enjoyed ones. However the ruby is so much more than its eternal beauty.

The diamond obtains its name from the Greek work adamas implying unequalled. In firmness, there is no contrast. The ruby rates in the Mohs range a 10 which is the hardest compound on Planet. Its cutting resistance is 140 times that of the ruby and sapphire, the gems(Diamond) that are following in the Mohs scale in hardness. The diamond's optical buildings such as radiance and also rigidity make it distinct and also quickly identified from various other imitations. Delight in!

* Background of Diamonds

The initial recorded diamond go back around 800 B.C. in India. Some think it also went back 6,000 years back. The rubies were utilized as ornamental functions as well as as amulets to ward off bad and also give defense in battle. Throughout the Dark Ages, diamonds were even mentioned to be utilized as a medical aid. Religious doctors also informed clients that if they hold a diamond in a hand as well as make the indicator of the cross would certainly, it would certainly cure and health problem and also heal wounds.

Rubies ended up being a lot more preferred throughout the 19th century as a result of discovery of ruby down payments in South Africa. This exploration causes enhanced supply, improved cutting and polishing techniques, and also growth in economic situation. In 1979, geologists located the Argyle pipe in Australia which to this day is the richest diamond down payment worldwide. Argyle, ever since, alone is in charge of providing over one third of the world's diamonds every year.

* Diamonds: Just how are they created?

Rubies includes an allotrope of carbons that are created in high-pressure, high-temperature conditions. Rubies are produced 90 miles under the Planet's surface at temperature levels of about 2200 levels Fahrenheit. Diamonds are created deep within the earth and also ultimately, over incredibly extended periods of time, push their method to the planet's surface, generally via volcanic eruptions.

The age of these diamonds from underneath the surface of the earth are from 1 to 3.3 billion years of ages! When diamonds are developed and also begin their ascent to the earth's surface, they go through networks where the lava from the volcano climbs to the surface, choosing up rubies in the process and also at some point depositing them externally, where they are eventually discovered as well as extracted.

* The 4 C's of Diamonds

There are four unique characteristics that determine the worth and also high quality of a diamond. These are the color, cut, clearness and also carat weight. Otherwise referred to as the 4 C's of a ruby. In the complying with, we will certainly discuss these features in detail.

* Color

In the last newsletter, we touch based on the color of gemstones as being one of the most crucial attribute as a result of the truth that shade is one of the most obvious attribute. The excellent ruby must show up clear and colorless however this is not the case for all diamonds. Diamonds could come in any color of the rainbow most usual shade is a color of yellow or brown. The Geological Institute of America(GIA) have devised a guideline to quality diamond shade. This standard contains a lettering system that ranges from the alphabet D - Z. Please see listed below:

D E F No Color G H I J Nearly Colorless K L M Faintly colored, can not rarely be seen and also generally yellow in shade N O P Q R Gently tinted, usually yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins from yellow as well as progresses to brown

* Quality

The cut a diamond is established by the diamond's proportion such as its shape, size and deepness. The cut identifies what is called the ruby's "radiance". Even if the ruby itself has best color and clearness, with a bad cut the ruby will certainly have a dull radiance. This is because the cut establishes how light travels within the ruby. The Gemological Institute of America has actually additionally created a quality grading system to place diamond clearness. This grading system consists of Perfect (Fl), Inside Flawless (IF), Really Very Slightly Consisted Of (VV1 or VV2), Really Slightly Included(VS1 or VS2), Somewhat Included(SI1 or SI2), and Included(I1, I2, as well as I3). Although this system had been added to the ruby market, it is not commonly used. This is due to the fact that it took a lot of practice and training to integrate it.

* Cut

The cut a ruby is figured out by the diamond's percentage such as its form, width as well as depth. The cut identifies what is called the ruby's "sparkle". Also if the ruby itself has ideal shade and quality, with a poor cut the ruby will certainly have a plain luster. This is due to the fact that the cut identifies exactly how light trips within the ruby.

There are 3 sorts of cuts that can identify the diamond's luster. These are a superficial cut, a cut that is unfathomable and also ideal cut. A superficial cut is a cut of a diamond that is as well reduced, that light traveling through it is lost on the bottom of the rock and does not return right into sight. This cut makes a ruby show up lifeless and boring. A cut that is unfathomable is a cut that is too high, that light taking a trip with it escapes with the sides and darkens the rock. An ideal cut is an ideal cut on a diamond that mirrors light to the top of the stone, giving it perfect brilliance.

* Carat

As stated on the last newsletter, a single carat(ct) considers concerning 200 milligrams or.2 grams. For smaller sized carat weight diamonds that consider less compared to a carat, it is expressed as factors (pt). Factors are 1/100 of a carat weight. Carat weight of a diamond is essential because of that larger diamonds are rarer than smaller ones, so primarily the bigger the diamond the much more expensive it is. There is no conventional grading system or layout that could show various carat weight. This is due to the fact that there are numerous variants of rubies in form as well as cut, which makes rocks of similar weight, look different.

* Imitation Diamonds

Because diamonds are one of the most important and also rarest of all the gemstones, efforts have been made to duplicate or even enhance rubies using more economical alternatives. A great deal of times, sincere mistakes have actually been made as well as these options or various other gems such as spinel were occasionally puzzled with genuine diamonds. In many cases, some deceitful individuals aim to market these options to misfortunate buyers in order to revenue. Below we will review concerning these alternatives and means to determine them.

* Artificial Diamonds

Synthetic rubies are diamonds that are expanded produced in a laboratory. The first well-known instances of ruby synthesis were asserted to be recorded in between 1879 - 1928, however this was never ever confirmed. It had not been till the 1940's where research study started in the United States, Sweden, Soviet Union started researching. Artificial rubies are otherwise referred to as High Stress High Temperature Level (HPHT) diamonds or Chemical Vapor Down Payment (CVD) diamonds. The name of both these synthetic diamonds originates from the procedures used to create them. A few of these synthetic rubies might either have higher, lesser or similar features than that of a diamond. Therefore, these artificial diamonds are made use of for abrasives, reducing and also brightening devices, and switches in power stations.

* Simulants

Simulants are non-diamond compounds that are used to duplicate the appearance as well as the shape of a ruby. One of the most standard as well as well recognized simulant is cubic zirconia (CZ). CZ at simple view could sparkle greater than a ruby and it is much less thick, indicating that a 1 carat weight CZ will certainly be much bigger than a 1 carat weight diamond. Nowadays, an extra prominent simulant is moissanite, which has all the same characteristics of a ruby. These qualities consist of firmness (Moissanite-9.25 and diamond-10 in Mohs scale), refractive index(Moissanite -2.65 and diamond -2.42) and also dispersion (Moissanite -.104 and also diamond -.044). This makes it tough to distinguish the 2 at simple view and would certainly typically call for testers to discriminate. In the following section we will discuss the best ways to recognize moissanites as well as various other imitations.

* Genuine or Fake?

An old method of determining rubies is to do a scratch test. This calls for damaging a ruby with one more ruby which is harmful as well as is seldom made use of nowadays. The best and most dependable means to test for diamonds is to use testers that utilize thermal conductivity. These testers are composed of battery powered thermistors installed with a retractable copper pointer. This tester functions by injecting the warmth onto the examined rock then the tool gauges the quantity of warmth that it conducts. Nonetheless thermal conductivity testers works best to distinguish diamonds and also its other simulants, it will certainly not aid differentiate laboratory created or artificial stones. To be able to determine these, certain optical methods are required. Laboratories utilize methods such as spectroscopy, microscopy and also luminescence in order to determine a specific stones origin. The average individual can make use of loupes and also microscopic lens to identify artificial stones. All-natural rubies generally have minor flaws and also problems such as inclusions or some kind of foreign product, which will not be found in synthetics.

princess cut diamond

How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Sekiu

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Vintage Wedding Rings in Washington