Unique Wedding Rings in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

18k diamond tennis bracelet

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

white gold diamond chain

How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Reston

Purchasing a diamond engagement ring is fairly a worthy purchase every male ought to be privileged adequate making. Some that do not truly know excessive about precious jewelry as well as diamonds could really feel as if they need to just go to a shop as well as choose a ring which looks attractive to them. Although this might do the technique, there are far better methods to choosing the most effective possible sort of ruby engagement ring for your liked one. The following will detail the top 10 keys to acquiring a diamond interaction ring.

Look around

Possibly one of the very best keys to keep in mind if you remember absolutely nothing else from this listing is to go shopping around. Buying a ring of this type on an impulse will certainly probably not lead you to the most effective offer or the best diamond. For that reason, take your time when shopping for an interaction ring, store around and see what is around to be purchased.

You Can Find a Beautiful Ruby Interaction Ring on Sale

You ought to also understand the reality that you are able to discover a charming ruby involvement ring with a favorable price connected to it. This is not to claim that you should limit your selections only to sale things but always don't hesitate to peruse the sale counter when browsing for an involvement ring to provide to your future fiancée. Do ensure that it is a legit sale and not one that runs throughout the year.

Size of the Ruby Really Doesn't Issue

An additional key when it concerns acquiring an involvement diamond ring is that the carat weight dimension of the ruby is not truly what issues when all is said as well as done. Although some could assume that a bigger diamond equals a far better ruby this is usually not the case as cut, color and clarity all need to be taken into consideration in addition to the carat weight of the stone.

Purchasing Online Is a Choice

With today's technology, you could acquire practically anything on the internet and also the very same is real for diamond involvement rings. For those who like the concept of an on-line acquisition, there are plenty of websites which provide ruby rings to buy and could use fairly an excellent deal also. Simply be specific to obtain paperwork stating truth top quality of the ring. The online company ought to have a Thirty Days cash back guaranty without questions asked.

Purchasing the Ring with Wedding Bands Can Conserve Loan

You could also locate that if you remain in the market for not just an engagement ring however wedding event bands too, purchasing all of these products together can conserve you loan. Specific ring designers will certainly create engagement rings with matching wedding celebration bands which you can acquire as a set.

White Gold Looks Like Platinum But Is Less Expensive

If your loved one suches as silver-tone fashion jewelry however you are not able to afford a platinum diamond interaction ring, consider purchasing one constructed from white gold. White gold is a good option as it looks like platinum yet is a lot more economical.

Precious Jewelry Stores Commonly Have A Couple Of Sales Throughout The Year

Another secret to getting a diamond involvement ring is that several fashion jewelry sellers provide sales throughout the year. Some are holiday sales whereas others are a way for the fashion jewelry shop to obtain rid of the old inventory to make area for new items entering into the store.

Purchasing the Ruby as well as Setup Separately Can Save Loan

You could additionally locate that getting the ruby as well as setting different from each other could save you some loan. It additionally allows you to pick specifically the kind of ring that you want as well as have the ability to see it prior to the stone is set.

Getting a Tiny Carat Weight Dimension with Baguettes Is Sometimes a Better Offer

If you are looking for a ruby interaction ring with a great deal of shimmer however you are unable to afford a huge carat ruby, think about acquiring a smaller ruby however include baguettes to the ring. This will certainly add glimmer and luster as well as not cost as much as a bigger diamond might cost.

Think About Little Jewelry Shops Which Offer Personalized Solution

For those that are searching for a jewelry shop which will offer individualized service, you could want to acquire the ruby engagement ring for your enjoyed one at a little jewelry store. These precious jewelry stores are usually run by the individual proprietor that will do whatever feasible to make your involvement ring purchasing journey stunning.

___________________________________________

Rose Gold Diamond Necklace in Virginia

2 Karat Diamond Stud Earrings in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

diamond rings

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Engagement rings are readily available in a selection of layouts, stones, cuts as well as shapes. Amongst all the kinds of stones used in engagement rings, diamonds are one of the most priceless and also ideal ones. Their shimmer genuinely has the ability to win a woman's heart. There is a fabulous collection of ruby interaction rings readily available in the market. Some of the rings are developer productions, which are made based on the consumer's choice. They could additionally be called personalized diamond interaction rings. Some of the jewelry experts provide the clients with the ability of seasoned designers to bring magic to the otherwise normal features as well as forms.

Developer diamond interaction rings are not just created inning accordance with the selection of customer but also fit their budget plan. These rings are economical, as compared with the other diamond interaction rings. The purchasers can select their own ring settings and also match the diamonds, to produce a special item of jewelry for enjoyed ones. The majority of the designer ruby engagement rings are made in white gold, yellow gold as well as platinum. Apart from the settings as well as ruby option, there are a number of other details that play an important duty in making a ring. In addition to picking a particular design, it is necessary for the purchasers to bear in mind the different mixes of styles. The size, density and also exact size of the rings are likewise important and also need to be taken into account while developing a ruby involvement ring. The majority of these rings take around 6 to 8 weeks to be made.

Developer ruby engagement rings are excellent options, as compared to the readymade rings conveniently offered. These rings offer more satisfaction to the buyers and are unique, owing to the individual touch. They give the buyer to work with the layout and choice of stone as well as personalize the creation.

engagement rings

How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Reston

Diamonds are normally offered in a really variety of colors. Lots of people find out about colorless diamonds and also GIA's shade grading system that is used to classify a ruby's body color ... you know D, E, F, and so on. This color grading system is just made use of to categorize the most typical diamond body shade of yellow nevertheless anytime a diamond is located in one more shade like pink, blue, environment-friendly, and so on; then this diamond is described as a "" expensive ruby"".

All-natural Fancy diamonds can be really costly and also lot of times extra expensive than a similar dimension anemic ruby. A great example of a Fancy ruby is the infamous 45.52 carat weight fancy deep blue ruby, the Hope Ruby, which gets on display in the Smithsonian Nature Gallery in Washington, DC.

A shade improved ruby is a 100% natural diamond that has actually had its shade changed. As well as finest of all, shade enhanced rubies been available in an extremely vast option of shades at extremely economical costs!

A bit of background- For numerous, several years it has actually been well understood that a diamond's shade can be "" enhanced"" by placing a little bit of tinted material externally of a ruby and also similar to magic ... a ruby that had a noticeable yellowish shade would transform to a much more attractive near anemic ruby. Unfortunately, this kind of shade boosted diamond might alter back to its original body shade if this colored compound was inadvertently removed. In even more current years, the innovation of shade boosted diamonds has actually gone extremely high tech. It is now feasible to completely transform the color of a ruby! These processes are thought about long-term since it does stay secure when subjected to day-to-day regular conditions. The color will certainly not fade if subjected to sunlight or be washed off by harsh chemicals.

Just how is it done? The preferred outcome of any one of these treatments is to have an extra marketable diamond. A less marketable ruby would certainly be a ruby that has a reduced body color or in some cases a reduced quality. The color improved diamond treatment firms recognize if they start off with a specific kind of diamond as well as procedure it for a specific amount of time that they ought to finish up with a specific shade but it does not constantly function by doing this. This is a scientific research that does require some art in their processes ... the only procedure that gives consistent outcomes is the covering procedure.

The three processes are as follows- Process # 1- HPHT Shade Improved Diamonds- High Stress/ Heat (HPHT) treatment could enhance the shade of particular kinds of brown diamonds and hence raise their value. General Electric has created a procedure that virtually is a mechanical simulation of a diamond's creation in nature. The shade enhanced ruby will be warmed up to a very high temperature under a really high, maintained pressure. Faults in the crystal structure are then rearranged resulting in a change of the diamond's color. Because the conditions of HPHT are extremely just like ruby's initial development, just a well equipped lab will have the ability to favorably recognize this sort of shade improved ruby. HPHT was first utilized to transform yellowish rubies into even more marketable fancy tinted improved rubies, and now it is also utilized to transform some undesirable brownish diamonds right into more preferable colorless colored enhanced rubies.

Process # 2- Irradiated Shade Enhanced Diamonds- OK ... do not start obtaining all excited since you saw the word irradiated! This is a 100% risk-free procedure that is extremely much like exactly what is utilized to maintain food by revealing it to a stream of Gamma rays. The shade improved ruby process is carried out in a number of different methods but the results are just the same. You start with a low color (P, Q, R, and so on) 100% natural ruby that has already been cut and polished, after that it is exposed to a stream of rapid electrons. During this part of the process the diamond will rely on a very dark color because several of the atoms in the diamond's crystal framework have actually currently been disjointed and also this consequently has influenced the way light go through the ruby. Next the diamond undergoes a regulated home heating (annealing) process, this allows several of those atoms to move (partially fixed) in order to acquire a preferred color.

Refine # 3- Covered Shade Improved Diamonds- The coating on polished rubies describes a thin synthetic layer that changes the shade of the ruby. The layer could either be of the desired shade or could create a tinted interference-effect. Regrettably occasionally this process is done to deceive a buyer. It is a reasonably easy procedure to carry out, it has been around for several years (although the finishes products are far better currently), and also it does not call for a whole lot of expensive advanced equipment. Recently, I've seen some pink coated rubies on the market, they are really appealing ... and also certainly you would certainly have to acquire them knowing that they have been covered and follow your jeweler's guidelines concerning possessing as well as caring for these shade boosted diamonds. The coating can be put on the entire of a diamond's surface area, just the base of the diamond, or to a narrow zone near the band. A well-applied finish can alter the color by several shade quality. Some coverings can be eliminated with boiling in acid, strong cleansing services, or also family chemicals. Occasionally dots or larger areas of purple or blue ink are paintinged on the diamond in order to help combat a yellow-colored shade. The diamond's setting will normally cover the dots, so they are tough to see in a mounted stone.

So, is a shade improved diamond right for you? Maybe ... natural expensive color diamonds can be lovely but they are pricey! Color enhanced rubies are budget friendly and also permit many individuals to have a brilliantly colored ruby. Ask your local jewelry expert if they have any Fancy diamonds ... either all-natural or shade enhanced rubies. It is constantly intriguing, and enjoyable, to take a look at something various!

Under typical wear the irradiated and HPHT shade improved rubies will have no worry of the shade fading away. The only consideration will be when you have to have any kind of kind of solution done on the piece of precious jewelry. If this kind of shade boosted diamond is exposed to extreme amounts of warm it may influence the color. The jeweler will have to understand that the diamond is a shade boosted ruby before any type of work is done and afterwards the jeweler will be able to choose on the very best strategy. Color improved rubies are currently additionally utilized as the small accent rubies around a bigger anemic ruby. There are many amazing pieces of jewelry available with tiny blue, yellow, black, or environment-friendly color boosted rubies.

Since you understand about shade improved rubies and also a person aims to sell you on just what they call an all-natural fancy tinted ruby but it is at a super bargain price ... you will know that something simply does not seem best regarding the deal. A record from a revered grading lab need to go along with natural Fancy colored rubies that are marketed as natural. If you deal with a trusted business and also you have actually been guaranteed about exactly what you are acquiring, after that you will certainly decrease the opportunity of something bad occurring to you. Similar to any circumstance entailing an expensive acquisition of something that very few individuals are experienceded in, education and learning should be an important part of your plan. This is also extra vital if you prepare to acquire a shade improved diamond. Bud Boland has actually remained in the fashion jewelry service for 40 years as well as has done everything from watchmaking, ruby setup, jewelry production, as well as has actually been a Jeweler for almost 35 years. He is a Grad Gemologist from GIA (Gemological Institute of The U.S.A.), which is also the area where he was an Instructor. He has educated about rubies to numerous trainees from all around the world

___________________________________________

Rose Gold Diamond Necklace in Virginia

3 Stone Diamond in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

three diamond engagement ring

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

How are ruby cut qualities assigned?

This is where points start to obtain complicated. The approaches utilized to quantitatively examine the quality of a cut vary. The method the GIA determines what a diamond's cut quality ought to be, for instance, differs in very certain methods from the method various other certifiers like the AGS do it. Most of the times, these organizations do not reveal the specific information of the processes they use.

The form of a ruby likewise makes a distinction relative to how its cut grade is identified. Although there are some standard standards that remain the very same for any type of kind of ruby, the exact approaches utilized to grade a round diamond's cut are various from those made use of to grade a heart-shaped diamond's cut.

The remainder of this description will certainly concentrate on round diamonds, as this is without a doubt the most usual ruby form. Among the elements influencing the cut grade of a rounded ruby is the variety of elements it has. Elements are the flat, specified locations externally of a diamond. The aspects on round rubies are typically triangular. Currently, it's assumed that the optimal round diamond need to have 33 aspects on the crown (the section of the diamond that rests over the band, which itself is the best factor of the diamond) as well as 25 on the structure (the reduced, much longer area of the diamond). When there are blemishes on the surface area of the ruby, cutters could add additional aspects in order to obscure them. This results in a destruction in the total quality of the cut.

While the aspect count is normally set as an excellent way of evaluating the top quality of a ruby cut, there are various other points on which jewelers often disagree. Several of the other variables used by some authorities in order to help figure out cut grades consist of the height of the diamond's crown, the depth of the structure, the size of the table (the top of the crown), and also the angles of the crown and structure.

The American Criterion benchmark for rounded rubies calls for a crown height of 16.2%, structure deepness of 43.1%, and table diameter of 53% of the overall band diameter. The Suitable Brilliant standard, however, asks for 19.2% crown height, 40% pavilion deepness, as well as 56.5% table size. While these differences might be difficult for novices to discern, they are a good illustration of the troubles related to creating a basic evaluation of a diamond's cut.

Although there are some differences regarding the precise percentages that constitute the excellent ruby cut, for prospective ruby customers, one of the most important point to understand is that diamond qualifications supplied by companies like the AGS as well as GIA are reliable and purposeful. Trustworthy diamond suppliers base the costs at which they buy as well as offer diamonds on the cut along with the remainder of the "four Cs." When you buy a ruby, you do not have to fret about the assumption of exactly what makes an excellent ruby cut changing a lot that the value of your ruby will be substantially influenced.

Which ruby reduced grade stands for the very best worth?

Which sort of ruby is best for you mostly depends on your budget. For purchasers that agree to acquire them, vendors normally recommend rubies with the greatest feasible cut grades. Nonetheless, this could result from some self-interest on their part.

The other three Cs have an impact on ruby rates also, so it can be challenging to determine the specific distinction in cost in between an Ideal or Excellent cut diamond and a Great cut. For casual customers and also budget-conscious investors alike, rubies with a Great or Good cut quality can stand for a superb value. This is because, while they can be extra budget-friendly compared to or else equal Perfect or Excellent cut rubies, the noticeable difference in quality is marginal.

At the same time, really feel totally free to use your discretion. If, as an example, you come across a diamond with a Suitable cut score which has good rankings in the various other categories as well as is still within your spending plan, after that you need to definitely consider it, as long as you're handling a trusted vendor.

white gold diamond chain

What Are Color Enhanced Diamonds and also Are They For You?

Reston

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Heart Diamond Wedding Ring in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

mens rose gold wedding rings

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Exactly how are ruby cut qualities designated?

This is where points begin to obtain made complex. The methods utilized to quantitatively examine the top quality of a cut vary. The way the GIA determines exactly what a diamond's cut grade need to be, as an example, varies in very details ways from the way various other certifiers like the AGS do it. In a lot of instances, these organizations do not reveal the precise information of the processes they utilize.

The shape of a ruby also makes a difference with regard to exactly how its cut quality is figured out. Although there are some fundamental standards that continue to be the same for any sort of ruby, the exact techniques utilized to quality a round diamond's cut are various from those used to quality a heart-shaped diamond's cut.

The remainder of this description will concentrate on rounded diamonds, as this is without a doubt the most typical diamond shape. Among the elements influencing the cut quality of a round ruby is the variety of aspects it has. Facets are the flat, defined areas on the surface of a ruby. The facets on round rubies are generally triangular. Currently, it's assumed that the suitable round ruby need to have 33 aspects on the crown (the area of the diamond that rests over the girdle, which itself is the widest factor of the ruby) as well as 25 on the pavilion (the lower, longer area of the ruby). When there are blemishes externally of the diamond, cutters may add added facets in order to obscure them. This results in a deterioration in the general quality of the cut.

While the element matter is typically decideded upon as an excellent way of evaluating the top quality of a diamond cut, there are other points on which gemologists often differ. A few of the other factors used by some authorities to assist identify cut qualities consist of the height of the ruby's crown, the deepness of the pavilion, the size of the table (the top of the crown), and also the angles of the crown as well as structure.

The American Requirement criteria for round rubies asks for a crown elevation of 16.2%, structure deepness of 43.1%, and table diameter of 53% of the complete band diameter. The Ideal Brilliant criteria, nevertheless, asks for 19.2% crown elevation, 40% structure depth, as well as 56.5% table diameter. While these differences may be challenging for beginners to discern, they are an excellent illustration of the problems related to creating an easy assessment of a ruby's cut.

Although there are some arguments as to the precise percentages that constitute the best ruby cut, for prospective ruby purchasers, one of the most vital thing to recognize is that ruby accreditations offered by organizations like the AGS and also GIA are reliable and also meaningful. Trusted ruby suppliers base the rates at which they purchase as well as market rubies on the cut as well as the rest of the "four Cs." When you purchase a diamond, you don't have to stress over the perception of just what makes a good ruby cut altering so a lot that the value of your ruby will certainly be substantially impacted.

Which diamond reduced grade stands for the very best value?

Which sort of diamond is best for you largely depends upon your budget plan. For buyers that are ready to acquire them, suppliers usually advise diamonds with the greatest possible cut qualities. Nevertheless, this could result from some self-involvement on their component.

The other three Cs have an effect on diamond rates too, so it could be tough to assess the precise distinction in cost in between an Ideal or Superb cut ruby and also a Great cut. For informal purchasers as well as budget-conscious capitalists alike, diamonds with a Very Great or Good cut grade could stand for an exceptional value. This is because, while they could be much more cost effective compared to or else equivalent Perfect or Superb cut rubies, the noticeable difference in high quality is minimal.

At the exact same time, feel complimentary to use your discretion. If, for instance, you stumble upon a ruby with a Suitable cut ranking which has great rankings in the other classifications and is still within your spending plan, after that you should certainly consider it, as long as you're handling a reliable supplier.

white gold diamond necklace

Ways To Acquire Diamonds When Getting Wholesale.

Reston

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

2 Ct Diamond Bracelet in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

channel set diamonds

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

white gold diamond chain

How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Reston

How are diamond cut grades assigned?

This is where things begin to get made complex. The techniques utilized to quantitatively examine the quality of a cut differ. The way the GIA determines just what a ruby's cut quality must be, for instance, differs in really specific means from the method other certifiers like the AGS do it. For the most parts, these organizations do not divulge the specific details of the procedures they utilize.

The form of a ruby also makes a difference with respect to how its cut quality is identified. Although there are some standard standards that stay the same for any type of sort of ruby, the precise techniques utilized to grade a round ruby's cut are different from those utilized to grade a heart-shaped diamond's cut.

The remainder of this description will certainly concentrate on round diamonds, as this is without a doubt one of the most typical ruby form. Among the aspects impacting the cut grade of a rounded diamond is the variety of elements it has. Facets are the flat, defined areas on the surface of a diamond. The aspects on round diamonds are typically triangular. Currently, it's thought that the ideal round ruby need to have 33 aspects on the crown (the section of the diamond that rests over the band, which itself is the best point of the diamond) as well as 25 on the structure (the reduced, longer area of the diamond). When there are flaws on the surface area of the diamond, cutters might add added elements in order to cover them. This results in a destruction in the general quality of the cut.

While the element matter is usually set as an excellent means of evaluating the quality of a ruby cut, there are various other points on which gemologists regularly disagree. Some of the various other variables made use of by some authorities to assist figure out cut grades include the elevation of the ruby's crown, the depth of the structure, the size of the table (the top of the crown), and also the angles of the crown and pavilion.

The American Criterion benchmark for rounded diamonds requires a crown elevation of 16.2%, pavilion deepness of 43.1%, as well as table size of 53% of the complete band diameter. The Suitable Dazzling standard, however, asks for 19.2% crown height, 40% pavilion deepness, and 56.5% table diameter. While these distinctions might be hard for amateurs to recognize, they are a great image of the troubles connected with developing an easy assessment of a ruby's cut.

Although there are some disagreements as to the specific percentages that constitute the excellent ruby cut, for possible diamond customers, the most crucial thing to comprehend is that ruby qualifications provided by companies like the AGS and also GIA are trustworthy as well as purposeful. Respectable diamond suppliers base the costs at which they buy as well as market rubies on the cut along with the rest of the "four Cs." When you purchase a ruby, you do not need to bother with the understanding of exactly what makes an excellent ruby cut altering so much that the worth of your diamond will be considerably affected.

Which ruby cut grade represents the most effective value?

Which kind of ruby is best for you mainly relies on your budget plan. For customers that agree to buy them, vendors generally recommend rubies with the highest possible cut qualities. Nonetheless, this could be due to some self-involvement on their part.

The various other 3 Cs have an effect on ruby prices too, so it can be challenging to gauge the exact distinction in cost between a Perfect or Superb cut diamond as well as a Great cut. For casual customers and budget-conscious capitalists alike, rubies with an Excellent or Excellent cut quality can represent a superb worth. This is because, while they can be more inexpensive compared to otherwise equivalent Suitable or Exceptional cut diamonds, the visible distinction in high quality is marginal.

At the exact same time, don't hesitate to utilize your discernment. If, for example, you find a diamond with a Perfect reduced ranking which has good rankings in the other groups as well as is still within your spending plan, after that you ought to certainly consider it, as long as you're dealing with a trustworthy vendor.

___________________________________________

Rose Gold Diamond Necklace in Virginia