Princess Cut Diamond Rings in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

round diamond earrings white gold

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Rubies are naturally offered in a very variety of shades. Most people know regarding colorless rubies and GIA's color grading system that is made use of to classify a ruby's body color ... you understand D, E, F, and so on. This color grading system is just utilized to identify one of the most common diamond body color of yellow however anytime a diamond is found in one more shade like pink, blue, green, etc.; then this diamond is referred to as a "" expensive diamond"".

Natural Fancy rubies could be extremely costly and sometimes extra pricey than a comparable dimension colorless ruby. An excellent example of a Fancy ruby is the notorious 45.52 carat weight elegant deep blue diamond, the Hope Diamond, which gets on screen in the Smithsonian Natural History Museum in Washington, DC.

A color enhanced diamond is a 100% all-natural ruby that has actually had its color transformed. As well as ideal of all, shade improved rubies been available in an extremely broad option of colors at extremely economical rates!

A bit of history- For several, years it has been well known that a ruby's shade could be "" boosted"" by placing a bit of colored material on the surface of a diamond and just like magic ... a diamond that had a recognizable yellowish color would certainly change to a much more attractive near anemic ruby. Regrettably, this kind of shade boosted diamond could transform back to its initial body color if this colored compound was accidentally gotten rid of. In more current years, the modern technology of shade enhanced rubies has gone exceptionally high tech. It is currently possible to totally alter the shade of a diamond! These processes are considered permanent since it does continue to be steady when exposed to daily normal problems. The shade will certainly not fade if exposed to sunlight or be washed off by harsh chemicals.

How is it done? The preferred result of any one of these treatments is to have a more valuable ruby. A much less valuable ruby would be a diamond that has a reduced body color or in some cases a lower clearness. The shade improved diamond treatment firms recognize if they begin with a specific type of diamond and procedure it for a certain quantity of time that they should wind up with a specific shade however it does not constantly function this way. This is a scientific research that does call for some art in their procedures ... the only procedure that offers constant results is the finish process.

The three processes are as adheres to- Refine # 1- HPHT Shade Improved Diamonds- High Stress/ Heat (HPHT) treatment could boost the color of particular sorts of brown diamonds and thus increase their worth. General Electric has created a procedure that practically is a mechanical simulation of a diamond's development in nature. The shade boosted ruby will be warmed up to an extremely high temperature level under a very high, supported stress. Mistakes in the crystal structure are then repositioned leading to a modification of the ruby's color. Because the conditions of HPHT are extremely comparable to ruby's initial formation, just a well furnished laboratory will certainly be able to favorably determine this kind of shade improved diamond. HPHT wased initially made use of to transform yellowish diamonds right into even more marketable fancy colored improved rubies, yet currently it is likewise made use of to change some undesirable brownish diamonds into preferred anemic tinted enhanced diamonds.

Process # 2- Irradiated Shade Boosted Diamonds- OK ... do not begin getting all excited due to the fact that you saw words irradiated! This is a 100% secure procedure that is very much like exactly what is utilized to maintain food by exposing it to a stream of Gamma rays. The shade enhanced diamond process is carried out in numerous different means but the outcomes are just the same. You begin with a reduced shade (P, Q, R, and so on) 100% natural diamond that has currently been reduced as well as polished, after that it is subjected to a stream of rapid electrons. Throughout this component of the procedure the diamond will certainly count on a very dark shade due to the fact that a few of the atoms in the ruby's crystal framework have actually now been dislocated and also this in turn has impacted the method light travel through the diamond. Next the ruby goes through a controlled home heating (annealing) process, this allows a few of those atoms to transfer (partially repaired) in order to get a preferred color.

Process # 3- Layered Shade Boosted Diamonds- The layer on refined rubies describes a thin synthetic layer that modifies the color of the diamond. The layer can either be of the preferred shade or can create a colored interference-effect. However occasionally this procedure is done to deceive a purchaser. It is a relatively simple procedure to carry out, it has been around for several years (although the finishings products are far better currently), and it does not need a great deal of pricey high tech devices. Recently, I've seen some pink layered rubies on the marketplace, they are really eye-catching ... and certainly you would certainly need to purchase them knowing that they have actually been layered and follow your jeweler's standards about owning and also caring for these shade boosted rubies. The coating could be used to the whole of a diamond's surface, just all-time low of the ruby, or to a narrow area near the band. A well-applied layer can alter the color by several shade grade. Some finishes could be removed with steaming in acid, strong cleaning options, or even household chemicals. Occasionally dots or bigger locations of purple or blue ink are painted on the ruby to help neutralize a yellow-colored shade. The diamond's setting will normally cover the dots, so they are hard to see in a mounted rock.

So, is a shade enhanced diamond right for you? Possibly ... all-natural fancy color rubies could be lovely but they are expensive! Color boosted diamonds are budget-friendly and also allow lots of people to own a vibrantly tinted diamond. Ask your local jewelry expert if they have any kind of Fancy rubies ... either all-natural or shade boosted rubies. It is always intriguing, and also fun, to look at something different!

Under regular wear the irradiated as well as HPHT color boosted rubies will have no issues of the color fading away. The only consideration will certainly be when you have to have any type of type of solution done on the piece of jewelry. If this sort of shade enhanced ruby is subjected to extreme amounts of heat it might affect the shade. The jewelry expert will have to recognize that the ruby is a shade boosted diamond prior to any type of work is done and after that the jewelry expert will be able to choose on the ideal course of action. Color enhanced rubies are currently also utilized as the tiny accent rubies around a larger colorless ruby. There are numerous interesting items of jewelry available with small blue, yellow, black, or eco-friendly shade boosted rubies.

Currently that you learn about color improved diamonds and also somebody attempts to sell you on what they call an all-natural fancy colored diamond however it goes to an incredibly bargain rate ... you will recognize that something just does not appear right regarding the deal. A report from a revered grading lab need to go along with natural Fancy colored diamonds that are marketed as natural. If you handle a reliable business and also you have been guaranteed concerning exactly what you are purchasing, after that you will certainly minimize the opportunity of something negative occurring to you. Just like any kind of situation entailing a pricey purchase of something that few people are well versed in, education and learning ought to be an important part of your strategy. This is much more important if you plan to buy a shade boosted diamond. Bud Boland has remained in the precious jewelry company for 40 years and also has actually done everything from watchmaking, diamond setup, precious jewelry making, and has actually been a Gemologist for almost 35 years. He is a Grad Jeweler from GIA (Gemological Institute of The U.S.A.), which is likewise the area where he was a Trainer. He has actually taught regarding diamonds to hundreds of trainees from all around the world

3 stone halo engagement ring

The Big 4 Cs For Loose Diamonds

Ringgold

Not all vendors supply ruby grading lab reports (aka diamond quality records) to their customers. So my basic recommendations to you is to keep your money in your pocket when managing such jewelry experts.

Just purchase a diamond interaction ring if it includes the original ruby high quality record.

A lab report is an independent analysis of the 4Cs of a loose diamond and includes an outlined diagram of the stone's quality features and a graphic representation of the stone's percentages. Having such a report permits you to compare rubies of various top qualities and also inevitably aids you make a more notified buying choice.

A merchant may reduce edges and also not provide a laboratory record or an unscrupulous vendor could supply a fake one due to the moment, difficulty and also expense he'll bear to obtaining a stone rated.

Yeah - there is a rate for rating a ruby (though that price is eventually paid by the customer), plus the delivery and also insurance policy costs for sending out the ruby to the lab. As well as allow us not forget the possibility expense of a jewelry expert not having the ruby in his store to buy for a couple of weeks while the grading takes place.

Nonetheless, a diamond rating report may likewise not be available due to the fact that the prices to obtaining one may impact as well heavily on the final rate of the ring. For instance, a 0.3 ct ruby ring setting you back $250 say, may set you back around $75 to be graded as well as have the report number inscribed on the band on the ruby. As you look for that suitable diamond engagement ring for your sweetheart, you'll discover that there is an alphabet soup of laboratories claiming to offer trusted ruby grading records. However I would just place my cash on ...

The Premier Ruby Grading Laboratory News

Yes, all ruby top quality reports are not created equal. Within the industry, it is an agreement that both top laboratories are GIA-GTL (Gemological Institute of The U.S.A.'s Treasure Trade Lab) and the AGS (American Gem Culture Laboratories).

The GCAL (Treasure Certification and Assurance Lab) additionally uses very pertained to records or "ruby certifications" as they are described by GCAL. The GIA has the strongest international credibility for independence and also consistency. Due to their continuous shade and also quality strictness guidelines, the globe's largest and most pricey diamonds have actually been sent there for grading years. In 2006, GIA-GTL included a two-dimensional cut grading system for rounded dazzling diamonds.

AGS utilizes the strictest cut requirements in the industry. It uses a three-dimensional light efficiency metric that can grade a number of ruby shapes. Actually, it is the only cut grading system that is acknowledged by the scientific area.

Exactly what is more, its Diamond High quality Record uses a distinct as well as proprietary 0 to 10 grading system to review the 4 Cs - a system which is much easier to understand than GIA's grading system. In fact, AGS also goes the added step by corresponding their 0-10 ranking range to other kinds of rating. For example, the standard VS1 ruby clearness score is a 3 on the AGS Diamond Top Quality Record.

Diamond Coverage - The Drawbacks

1. Diamond grading is not standard or regulated and also for this reason you could discover rate 2 labs that utilize looser guidelines to the rate 1 grading labs mentioned above. If you purchase a ruby that has been rated by a tier 2 laboratory, you may wind up paying more for a lesser top quality ruby. So for instance, a ruby ranked a "F" in shade at a rate 2 laboratory could obtain a G, H, or lower shade ranking at an extra reliable lab. The sector likewise discounts diamonds graded by minimal known labs by concerning 15-30% or even more. So either you only acquire a diamond rated by a tier 1 lab or you approve that you could be getting a lesser quality diamond compared to exactly what is stated on the report if that diamond is rated by a lower recognized lab.

2. Many big chain stores have huge contracts with lower known labs with "softer" diamond grading standards. A few of these softer laboratories put "suggested replacement worths" on the laboratory records - worths which are more than just what stores means sell the diamonds for. So a salesman in a store might state to you, "Take a look at the large amount you are obtaining below. We are selling you this diamond engagement ring for $2500 but the record states that the suggested replacement worth is $4000." Wow - what a bargain - NOT! This is why it is better that you rely on only independent rate 1 labs.

Likewise keep in mind that respectable ruby grading reports are not appraisals and also don't provide assessment figures. Diamond assessments are typically grossly inflated as well as are not something you'll desire to rely on.

3. Diamond records are riddled with please notes that define that nothing is "licensed" or assured which the laboratories are not responsible for mistakes. Actually, the GIA uses a disclaimer of kinds on their internet site relating to the use of the word "certify." The web site states:

"It is incorrect to state that pupils, graduates, their services, or specific gems are "licensed" by GIA. The Gemological Institute of The U.S.A. does not accredit any person or anything. Neither a student nor a grad that has actually been granted a certification or diploma, nor a gem which has been rated or determined by GIA has actually been licensed by GIA".

So it is feasible that you the customer is left holding the bag should an inaccuracy in a record is later found. Courts have frequently ruled that vendors, not laboratories, are responsible for such errors. Why? Since the labs showed in advance that their reports could not be held responsible.

Fortunately, there are a pair means to provide on your own more purchaser defense:

A. You might fly to India where jewelers provide a life time buyback policy to their customers. Also expensive to fly?

B. You could find one of the 20% of US jewelry experts that offer completely bonded diamonds. These are rubies that are marketed with life time damage, lifetime trade-in and also life time buyback policies.

C. Not as good a remedy as acquiring a completely bound ruby yet you could acquire a ruby that includes an actual "certification" and also not a record. "Certified diamonds do feature warranties" albeit for shorter durations.

Certification Some vendors refer to a "diamond record" as a "qualified diamond" yet technically this is not correct. From a lawful point ofview, a diamond report is a merely a professional point of view though in actuality, elements of a ruby grading record are not simply point of views.

For instance, a diamond's carat weight (weight) can be precisely established as well as its cut grade by determining its optical effectiveness or by describing a computer model. A certification on the various other hand is a statement of truth - a paper for which the provider approves legal duty as well as will certainly make restitution to the customer for blunders.

Some top ruby grading labs use both reports and certifications. AGS offers Ruby Top quality Papers (non-certified records) and Ruby Top quality Certificates. Diamond Quality Certificates are prepared solely for AGS retail jewelry experts and supplies guaranties from getting involved American Treasure Culture participant stores.

GCAL licenses it's diamond grading also. Its 100% money-back guarantee plan is valid for a duration of two years from the date on the applicable certificate. This plan ensures the precision of the cut, color and also clarity qualities and the carat weight.

A report or certification need to will certainly have a number on it that might or might not be etched on a diamond. You will be able to go into that number on the internet site of the certifying laboratory to check a record's validity.

Aspects Of A Diamond Grading Report Diamond rating records are always evolving however certain element must remain the exact same. As an example, the:

The Report #. This number is offered and taped in a laboratory's record and also could or could not be inscribed on a diamond's girdle. You can go into the report number on a grading laboratory's internet site to examine the credibility of the diamond top quality report or to obtain more details regarding the diamond. Shape & Facet Style: This is the summary and the reducing style used for the element setup. There are 3 basic element designs - "brilliant cut, action cut and also mixed reducing style" and 12 basic forms which include notables such as rounded dazzling as well as princess cut" diamonds.

Measurements: This refers to dimension (not weight) of a diamond. Dimension consists of dimensions such as length, width, weight and also size. A measurement is normally detailed to the hundredth of a millimeter. Dimensions play a significant role in how a diamond glows.

Carat Weight: The weight of a diamond is gauged to the hundredth of a carat and some also provide such measure to the thousandth of a carat (1.123 ct.). Carat weight is one of the most unbiased as well as the simplest to understand of the 4Cs because all one has to do is weight the stone. Color Quality: This tells you the level of color absence in the ruby. The less color the higher the quality.

Diamonds are commonly graded from D-Z; the closer to "D" the whiter the diamond. You ought to never ever see diamond shade variety such as (G-H, I-J-K, and so forth) on a diamond record. You ought to just see color arrays on appraisals for rocks that are installed.

Clarity Grade: Essentially every ruby has inner blemishes called inclusions and exterior imperfections called imperfections. A diamond is rated according to the size, kind, area and amount of these problems.

Clarity grades vary from Flawless (FL) - Included. Labs utilize a couple professionals to grade the clearness of a diamond in order to think of a much more accurate reading.

Cut Grade: A lot more recent diamond reports include a cut quality for typical round dazzling rubies. Cut considers the radiance, fire as well as scintillation of the diamond. Cut grade varies from Excellent - Poor.

Other aspects you could encounter on a ruby record consist of the gloss, balance, fluorescence and percentage. Equipped with this info, you are better able to earn an assessment of the quality of diamond that is installed in an interaction ring.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Diamond Necklace Womens in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

pear diamond solitaire

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

You have been dating the individual of your dreams for fairly time now. You may or could not be remaining with each other as a couple, either of the two has its very own connection troubles; if you do not live as a couple, the sensation of solitude that rises with your heart every single time your companion claims the words "good bye" after a wonderful day well invested together influences you to do more and every single time you transform mistakenly to share with them your sensations, the void that greets you, promptly transforms your inspiration to do more into a willpower to do more now! For those who have actually taken their partnerships an action even more by relocating in with each other.

Because of the loneliness felt each time a partner claims excellent bye, different kinds of pressures and also feelings embeded in they could be the have to make your love official for the whole world to see or you both intend to start a steady family. Whatever inspires you into lastly making the initial step to one of the most important dedication you would ever before make in your whole life may not be off relevance but the symbol which you must provide while taking this step is of the utmost importance - "The Interaction Ring".

Today acquiring an involvement ring has now end up being the status quo of determining yourself as one that is already taken and also all set for marital relationship yet have you ever before had fun with the rock or band on your hand as well as thought of its history? Given that it's not specified in the holy bible or the oldest files that provide in-depth accounts of methods before marriage in time passed.

The popular interaction ring of the contemporary age had its beginning as current as the 19th century and also had not been constantly a sign of unequaled love, it was essentially the very first part repayment of the new bride price to be paid to the new bride's family members yet turned over as well as worn by the new bride. It was a type of insurance policy offered the woman, in situation the potential companion which was constantly the male during that time disbands the marital relationship thereby jeopardizing the female's virtue and also appeal to other guys.

The true significance and also icon of the interaction ring began radiating with in the 20th century, when males provided their fiancées a band that symbolized their love as well as intents for a marital relationship union, the involvement ring signified that she had actually been taken, out of restrictions as well as ready to be wed to her true love and also it was positioned on the fourth finger of the left hand, for that finger was believed to have a vein going through it which came straight from the heart as a result symbolizing the finger as a "heart finger". Earlier rings can simply be a piece of silver or an iron band without any adornment, which the female inserts into her 4th finger on her left hand, this was the method for a brief time till commercial rings and the media took control of the involvement scene. The Adverts shown on interaction rings in the center of the 19th century recommended that males need to invest no less than 2 months of their month-to-month earnings to buy the perfect ring for his valuable new bride to be and simply with an advert the interpretation and design of the involvement ring took a new direction. The modern-day interaction ring is a symbol that shows that an individual is engaged to be married with design. The cut, prices and make from the involvement ring although not very important, adds a certain flavour to your interaction day or event and has scoffed a brand-new jewelry market all by itself. The Involvement ring currently comes in different styles; it could be a band made from priceless materials such as Gold, Platinum or Silver or it could be a band tied with treasure stones to provide a tempting charm to the ring. The different major styles of engagement rings will be talked about listed below.

Different Kinds Of Engagement Rings

Jewelry rings; these are the quintessential traditional involvement rings, the jewelry ring includes a band and also a treasure stone; the band might be made from any kind of product of your selection varying from gold to platinum while the gemstone should additionally be decided to fit your strange attributes, it might be rubies or pearl cut in various means that would be clarified listed below.

Interaction Rings with Side rocks: These exquisite rings are made with gems put right into the sides of the band, which could be made from any type of steel material depending upon your preference. Some side rocks call additionally included a main stone at the middle. The preferred gemstones utilized for this style of rings are typically diamonds but you can directly tailor your gems to the preference of your love.

The Three Rock Rings or the Trinity ring: this is a ring layout with its own romantic history, it is believed that each stone in the 3 rock ring symbolizes the past, present as well as future of the moment in which a couple has actually invested with each other and the ring would certainly bind them together for all eternity. The ring design is that of an immaculate platinum band with 3 beautiful gems; one at the center with two place purposefully by the sides. The gems are generally crazy of diamonds yet you are enabled to personalize your own into three various sorts of gems if you so need.

The Matching Bridal Establish: this is a lovely combination of both the involvement ring as well as the actual wedding event band, there is no collection style on just how a matching wedding set needs to appear like yet it is usually excellent to have either the involvement ring or the wedding ring accentuating the various other as well as vice versa I.e. an exquisite platinum engagement ring with a gems ought to be coupled with a simple Gold traditional wedding celebration band, offering the bride-to-be with a touch of colour. Stress Rings: allow the name not serve as an obstacle to you when taking into consideration the tension ring for it is among those layouts we call straightforward however indefinitely elegant, it includes a band made from any product of your option, tightly holding a gemstone in its grasp with pressure i.e. the gems is not held by prongs however clasped in between both sides of the band material you chose. The band material works as its holding assistance. It is very suggested you opt for two contrasting colours for the band and the gems to draw out real beauty of the stress ring.

The Various Cuts of Gemstones

The Pillow cut: this technique of reducing a gems, gives the rock a classic shape that is in between a rectangle as well as an oval, it is among one of the most popular jewellery cuts as well as it's also referred to as the antique cut.

The Marquise cut: the approach employed in cutting the shape of the marquise cut gives the gems an oval shape between with ends. This ring has a classic elven or should I say earthy look that brings out the supernatural charm in your new bride.

The Emerald cut: the emerald gem normally has its own defined form as well as this cut technique clearly mirrors it, the emerald cut is a rectangle-shaped cut with cropped corners protruding at its 4 ends.

The Asscher cut: this approach of reducing the gems offers it a form individuals state resembles the emerald rectangular shape however it is much more octagonal fit than rectangle, the octagonal form assists it catch light and mirror it in different instructions. It's a completely gorgeous cut for a rings gemstone.

The Princess cut: this is among the most previously owned cuts on gemstones, it is square in form as well as helps bring out the elegance of the gemstone used rather demurely. The Round cut: this cut general looks round but its even more than that for it has various spikes added to its surfaces making it among, if not one of the most beaming gems cut of the whole lot, it is recognized among women for its capability to blind the eye (sparkle).

The Heart cut: perfect for the romantics in mind as well as shaped to stubborn belly their hearts, it is a simple as well as elegant cut that is fairly popular among women. After offering a general reveal on involvement ring designs and cuts, the following step is to give your notification the leaders in the industry that gives you with the very best and also most pricey rings- in many cases- around.

Expense Barnes: the manufacturers of several of one of the most charming as well as costly involvement bands available. Tiffany: everybody recognizes the name Tiffany this developer residence also supplies consumers with top of the range rings as well as costs delay. Tacori: the Tacori style is additionally among one of the most searched for engagement rings in the jewellery sector the cut and also setup of its styles are always a joy to lay eyes on.

In selecting a ring your budget have to likewise enter into play so either you buy Tiffany's or an ordinary involvement ring, it's the thought that counts.

unique wedding bands

What You Should Know When Purchasing a Diamond Ring

Ringgold

You have been dating the individual of your dreams for rather some time now. You might or might not be remaining together as a pair, either of the 2 has its very own partnership troubles; if you do not live as a pair, the sensation of isolation that surges with your heart each time your companion says the words "excellent bye" after a charming day well invested together motivates you to do more and also every single time you transform mistakenly to share with them your sensations, the vacant area that welcomes you, quickly transforms your inspiration to do even more into a willpower to do even more now! For those who have actually taken their relationships an action further by relocating together.

Due to the loneliness really felt each time a companion claims great bye, different forms of pressures and also sensations established in they might be the have to make your love official for the entire globe to see or you both want to begin a stable household. Whatever encourages you into ultimately making the primary step to one of the most crucial commitment you would ever make in your whole life might not be off significance but the sign which you have to supply while taking this step is of the utmost importance - "The Engagement Ring".

Today buying an involvement ring has currently come to be the condition quo of determining yourself as one who is currently taken as well as prepared for marital relationship however have you ever before played with the rock or band on your hand and considered its background? Since it's not defined in the holy bible or the earliest records that give detailed accounts of techniques prior to marital relationship in time passed.

The preferred interaction ring of the contemporary age had its beginning as recent as the 19th century and also wasn't always an icon of unequaled love, it was extra or much less the very first part repayment of the bride price to be paid to the bride's household yet turned over as well as worn by the bride. It was a sort of insurance offered for the lady, in case the prospective companion which was constantly the male back then disbands the marriage consequently compromising the woman's merit and also attract other men.

Truth meaning as well as sign of the engagement ring began radiating through in the 20th century, when men provided their fiancées a band that symbolized their love as well as intents for a marriage union, the involvement ring represented that she had been taken, from limits and also ready to be wed to her true love as well as it was put on the fourth finger of the left hand, for that finger was believed to have a vein going through it which came straight from the heart consequently symbolizing the finger as a "heart finger". Earlier rings might simply be a piece of silver or an iron band without any accessory, which the lady inserts into her 4th finger on her left hand, this was the technique momentarily till commercial rings and also the media took control of the engagement scene. The Adverts revealed on interaction rings in the center of the 19th century suggested that males should spend no less than 2 months of their regular monthly earnings to purchase the best ring for his priceless bride-to-be to be and simply with an advert the meaning and also design of the interaction ring took a new direction. The contemporary involvement ring is an icon that reveals that a person is engaged to be married with style. The cut, pricing as well as construct from the interaction ring although not all essential, adds a specific flavour to your engagement day or ceremony as well as has scoffed a new jewelry market all on its very own. The Interaction ring now comes in different designs; maybe a band constructed from priceless materials such as Gold, Platinum or Silver or it can be a band laced with treasure rocks to give a tempting appeal to the ring. The various major designs of engagement rings shall be gone over below.

Various Sorts Of Involvement Rings

Solitaire rings; these are the quintessential timeless interaction rings, the jewelry ring includes a band and a treasure stone; the band could be made from any material of your option varying from gold to platinum while the gems must likewise be preferred to fit your strange characteristics, maybe diamonds or sapphire cut in various means that would be described listed below.

Involvement Rings with Side rocks: These beautiful rings are made with gems placed right into the sides of the band, which can be made from any type of steel material depending upon your preference. Some side rocks ring likewise featured a main rock at the center. The prominent gemstones used for this style of rings are typically diamonds but you could personally tailor your gems to the preference of your love.

The Three Rock Bands or the Trinity ring: this is a ring design with its own enchanting background, it is believed that each rock in the three stone ring symbolizes the past, present and future of the time in which a pair has actually invested with each other and also the ring would bind them with each other for all endless time. The ring layout is that of an immaculate platinum band with 3 beautiful gems; one at the middle with two place purposefully by the sides. The gems are typically crazy of diamonds however you are enabled to customize yours into three various sorts of gemstones if you so wish.

The Matching Bridal Set: this is a gorgeous combination of both the engagement ring and also the actual wedding event band, there is no collection design on exactly how a matching wedding collection should appear like however it is generally excellent to have either the engagement ring or the wedding event ring emphasizing the various other as well as the other way around I.e. a charming platinum engagement ring with a gemstone ought to be matched with a simple Gold classic wedding celebration band, offering the bride with a touch of colour. Stress Rings: let the name not work as a barrier to you when taking into consideration the tension ring for it is just one of those layouts we call easy yet forever classy, it consists of a band made from any kind of material of your option, firmly holding a gems in its hold with pressure i.e. the gems is not held by prongs however squeezed in between both sides of the band product you picked. The band material works as its holding support. It is highly suggested you go for 2 contrasting colours for the band as well as the gemstone to bring out real charm of the stress ring.

The Various Cuts of Gems

The Pillow cut: this approach of reducing a gemstone, provides the rock a timeless shape that is between a rectangle as well as an oval, it is one of the most preferred jewellery cuts and also it's also called the antique cut.

The Marquise cut: the approach used in cutting the shape of the marquise cut provides the gemstone an oblong form in the center with ends. This ring has a traditional elven or must I say earthy appearance that draws out the mythological elegance in your new bride.

The Emerald cut: the emerald treasure normally has its own specified form and this cut method clearly mirrors it, the emerald cut is a rectangular cut with chopped corners protruding at its four ends.

The Asscher cut: this method of reducing the gems offers it a form people state resembles the emerald rectangular shape however it is more octagonal in form compared to rectangular shape, the octagonal form assists it capture light and mirror it in different instructions. It's a perfectly attractive cut for a rings gemstone.

The Princess cut: this is just one of one of the most pre-owned cuts on gemstones, it is square fit and helps draw out the beauty of the gems utilized quite demurely. The Round cut: this cut basic looks round but its even more compared to that for it has different spikes added to its surface areas making it among, if not one of the most shining gemstone cut of the lot, it is known among females for its capacity to blind the eye (sparkle).

The Heart cut: ideal for the romantics at heart and formed to belly their hearts, it is a basic and also sophisticated cut that is fairly prominent among women. After offering a general reveal on involvement ring styles and cuts, the next step is to offer your notification the leaders in the market that supplies you with the finest and most expensive rings- in many cases- around.

Bill Barnes: the producers of a few of the most splendid and also costly interaction bands available. Tiffany: everyone recognizes the name Tiffany this developer home also gives clients with top of the array rings and also prices postpone. Tacori: the Tacori design is likewise among the most sought after engagement rings in the jewelry industry the cut as well as plan of its styles are constantly a happiness to see.

In choosing a ring your budget have to likewise come right into play so either you buy Tiffany's or an ordinary involvement ring, it's the thought that counts.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Anniversary Bands in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

engagement rings

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

marriage rings

Rating Rough Diamonds!

Ringgold

Buying a diamond involvement ring is quite a worthy purchase every guy should be privileged enough to make. Some who do not actually know also much concerning fashion jewelry and rubies may feel as if they should just most likely to a shop and choose out a ring which looks attractive to them. Although this may do the method, there are better ways to picking the most effective feasible sort of diamond interaction ring for your loved one. The adhering to will certainly list the leading 10 secrets to getting a ruby engagement ring.

Look around

Possibly one of the finest keys to bear in mind if you keep in mind nothing else from this checklist is to search. Acquiring a ring of this type on an impulse will certainly more than likely not lead you to the most effective deal or the very best diamond. As a result, take your time when shopping for an engagement ring, search and also see what is out there to be bought.

You Could Find a Gorgeous Ruby Engagement Ring for sale

You need to additionally recognize that you are able to locate an elegant ruby interaction ring with a positive price connected to it. This is not to state that you ought to limit your options only to sale things yet always do not hesitate to peruse the sale counter when looking for an interaction ring to offer to your future fiancée. Do ensure that it is a legitimate sale and also not one that runs throughout the year.

Size of the Diamond Really Doesn't Issue

An additional trick when it involves acquiring an involvement ruby ring is that the carat size of the diamond is not actually what issues when all is said and done. Although some might think that a larger ruby amounts to a much better diamond this is typically not the case as cut, shade and clarity all must be thought about in enhancement to the carat weight of the rock.

Buying Online Is a Choice

With today's technology, you can acquire nearly anything online as well as the exact same holds true for diamond engagement rings. For those who like the suggestion of an on the internet purchase, there are lots of sites which use ruby rings available and could provide fairly a great bargain also. Just be specific to get documents specifying truth high quality of the ring. The online business should have an One Month loan back guaranty with no questions asked.

Purchasing the Ring with Wedding Celebration Bands Could Save Loan

You could additionally discover that if you are in the market for not only an involvement ring however wedding celebration bands as well, purchasing all these products together could conserve you loan. Particular ring developers will certainly generate interaction rings with matching wedding event bands which you could acquire as a set.

White Gold Looks Like Platinum But Is More Economical

If your liked one likes silver-tone precious jewelry however you are unable to manage a platinum ruby involvement ring, take into consideration acquiring one made of white gold. White gold is a good alternative as it looks like platinum but is a lot cheaper.

Precious Jewelry Sellers Commonly Have One or 2 Sales Throughout The Year

One more key to getting a diamond interaction ring is that numerous fashion jewelry stores offer sales throughout the year. Some are vacation sales whereas others are a method for the jewelry shop to get eliminate the old inventory making space for new products entering into the shop.

Acquiring the Diamond and Setting Separately Could Conserve Loan

You could additionally locate that getting the diamond as well as establishing separate from each other can conserve you some money. It also enables you to pick specifically the kind of ring that you want as well as be able to see it before the rock is established.

Buying a Little Carat Weight Dimension with Baguettes Is Sometimes a Better Offer

If you are looking for a diamond engagement ring with a whole lot of sparkle yet you are incapable to afford a big carat weight ruby, think about purchasing a smaller diamond however include baguettes to the ring. This will certainly include glimmer as well as luster as well as not set you back as much as a larger ruby could set you back.

Consider Small Fashion Jewelry Stores Which Offer Personalized Solution

For those that are browsing for a precious jewelry shop which will supply individualized solution, you could wish to purchase the diamond interaction ring for your loved one at a little precious jewelry store. These jewelry stores are often run by the individual owner who will certainly do whatever possible to make your interaction ring purchasing journey magnificent.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Eternity Ring in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

marriage rings

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To begin our feature on different sorts of gems, we will certainly start with the most effective and also most well known gemstone of them all the ruby. The diamond is the supreme gems. It has extremely couple of weak points and numerous staminas. It glows with its extraordinary value and also sentimental value. It is used in wedding celebration rings to stand for limitless love or used as gifts/jewelry to be provided to enjoyed ones. However the ruby is so a lot more compared to its infinite charm.

The diamond derives its name from the Greek job adamas indicating irresistible. In solidity, there is no comparison. The ruby prices in the Mohs scale a 10 which is the hardest substance on Planet. Its reducing resistance is 140 times that of the ruby and sapphire, the gems(Diamond) that are following in the Mohs range in firmness. The diamond's optical properties such as luster and inflexibility make it special and also easily differentiated from other imitations. Appreciate!

* History of Diamonds

The initial taped diamond days back around 800 B.C. in India. Some believe it also went back 6,000 years back. The rubies were used as attractive functions as well as likewise as talismans to prevent evil and also offer security in fight. During the Dark Ages, diamonds were even mentioned to be utilized as a medical help. Religious physicians even told patients that if they hold a diamond in a hand and make the sign of the cross would, it would treat as well as disease as well as heal injuries.

Diamonds became more preferred during the 19th century because of exploration of diamond down payments in South Africa. This exploration brings about raised supply, boosted cutting and also polishing methods, and also growth in economic situation. In 1979, rock hounds discovered the Argyle pipeline in Australia which to this day is the wealthiest diamond deposit on the planet. Argyle, since then, alone is in charge of providing over one third of the globe's diamonds every year.

* Diamonds: How are they formed?

Rubies includes an allotrope of carbons that are formed in high-pressure, high-temperature problems. Rubies are produced 90 miles under the Planet's surface at temperatures of regarding 2200 degrees Fahrenheit. Rubies are formed deep within the planet and ultimately, over very lengthy durations of time, press their way to the earth's surface area, generally via volcanic eruptions.

The age of these diamonds from beneath the surface of the planet are from 1 to 3.3 billion years old! When diamonds are created and also start their ascent to the earth's surface area, they go via networks where the magma from the volcano rises to the surface, picking up diamonds in the process and also at some point transferring them on the surface area, where they are eventually discovered and extracted.

* The 4 C's of Diamonds

There are four unique attributes that determine the worth and quality of a ruby. These are the shade, cut, clearness and also carat weight. Or else referred to as the 4 C's of a diamond. In the following, we will speak concerning these attributes thoroughly.

* Color

In the last newsletter, we touch based on the color of gemstones as being one of the most important function because of the fact that color is the most evident feature. The excellent ruby should show up clear as well as colorless however this is not the situation for all rubies. Diamonds could come in any shade of the rainbow most common color is a color of yellow or brownish. The Geological Institute of America(GIA) have actually designed a guideline to quality ruby shade. This standard consists of a lettering system that varies from the alphabet D - Z. Please see below:

D E F No Shade G H I J Virtually Colorless K L M Faintly colored, can't barely be seen and also typically yellow in color N O P Q R Lightly tinted, usually yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins from yellow and also proceeds to brown

* Quality

The cut a diamond is determined by the ruby's proportion such as its form, size as well as deepness. The cut establishes what is called the ruby's "radiance". Also if the ruby itself has excellent color and quality, with an inadequate cut the ruby will have a plain luster. This is due to the fact that the cut figures out exactly how light journeys within the ruby. The Gemological Institute of The U.S.A. has additionally created a clearness grading system to rate ruby quality. This grading system consists of Perfect (Fl), Internally Perfect (IF), Extremely Very A Little Included (VV1 or VV2), Very Slightly Consisted Of(VS1 or VS2), Slightly Consisted Of(SI1 or SI2), and also Consisted Of(I1, I2, and also I3). Although this system had actually been contributed to the ruby sector, it is not widely used. This is because of that it took a great deal of method as well as training to integrate it.

* Cut

The cut a ruby is established by the diamond's proportion such as its form, width as well as deepness. The cut identifies just what is called the ruby's "luster". Even if the ruby itself has excellent shade as well as clarity, with an inadequate cut the diamond will certainly have a dull brilliance. This is since the cut determines exactly how light trips within the ruby.

There are 3 types of cuts that can determine the diamond's brilliance. These are a superficial cut, a cut that is unfathomable and excellent cut. A shallow cut is a cut of a ruby that is also low, that light taking a trip via it is shed under of the stone and also does not come back into sight. This cut makes a ruby show up drab as well as boring. A cut that is unfathomable is a cut that is expensive, that light traveling through it leaves through the sides and also dims the stone. An ideal cut is a best cut on a ruby that reflects light to the top of the rock, giving it ideal brilliance.

* Carat

As mentioned on the last e-newsletter, a solitary carat weight(ct) evaluates concerning 200 milligrams or.2 grams. For smaller carat weight diamonds that consider much less compared to a carat, it is expressed as factors (pt). Points are 1/100 of a carat weight. Carat weight of a diamond is necessary as a result of that bigger rubies are rarer compared to smaller ones, so essentially the bigger the diamond the more costly it is. There is no conventional grading system or layout that can reveal different carat weight. This is because there are many variants of diamonds in form and cut, that makes rocks of comparable weight, look different.

* Replica Diamonds

Considering that diamonds are one of the most important and also rarest of all the gemstones, efforts have actually been made to duplicate or also enhance diamonds making use of cheaper alternatives. A great deal of times, sincere mistakes have actually been made and these choices or various other gems such as spinel were often confused with actual rubies. In many cases, some deceitful individuals attempt to sell these choices to misfortunate purchasers in order to revenue. Listed below we will discuss concerning these alternatives and also means to identify them.

* Synthetic Diamonds

Artificial rubies are diamonds that are grown made in a lab. The first recognized cases of ruby synthesis were asserted to be documented in between 1879 - 1928, yet this was never ever confirmed. It had not been until the 1940's where research study started in the USA, Sweden, Soviet Union began looking into. Artificial diamonds are otherwise referred to as High Stress High Temperature (HPHT) rubies or Chemical Vapor Down Payment (CVD) diamonds. The name of both these synthetic rubies stems from the processes made use of to produce them. Several of these synthetic rubies might either have better, lesser or comparable attributes than that of a diamond. For that reason, these artificial diamonds are used for abrasives, cutting and also polishing tools, and switches over in power plant.

* Simulants

Simulants are non-diamond materials that are utilized to duplicate the appearance and also also the form of a ruby. One of the most fundamental and also popular simulant is cubic zirconia (CZ). CZ at plain sight can glimmer greater than a ruby as well as it is less dense, meaning that a 1 carat weight CZ will certainly be a lot bigger compared to a 1 carat ruby. Nowadays, a much more preferred simulant is moissanite, which has all the exact same features of a ruby. These features consist of solidity (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 and ruby -2.42) as well as diffusion (Moissanite -.104 as well as ruby -.044). This makes it difficult to differentiate both at plain sight as well as would frequently call for testers to discriminate. In the following section we will certainly go over the best ways to recognize moissanites and various other imitations.

* Real or Counterfeit?

An old technique of determining rubies is to do a scrape examination. This needs damaging a ruby with another ruby which is destructive and is seldom used nowadays. The ideal as well as most trusted method to examine for rubies is to use testers that make use of thermal conductivity. These testers contain battery powered thermistors installed with a retractable copper tip. This tester functions by injecting the heat into the examined stone and afterwards the gadget determines the quantity of heat that it carries out. Nevertheless thermal conductivity testers works best to distinguish rubies and also its other simulants, it will not aid identify lab developed or synthetic stones. To be able to identify these, certain optical strategies are required. Laboratories use techniques such as spectroscopy, microscopy as well as luminescence in order to establish a certain stones beginning. The average person could utilize loupes and microscopes to differentiate artificial stones. Natural diamonds usually have minor imperfections and flaws such as additions or some type of international material, which will certainly not be discovered in synthetics.

diamond rings

What You Should Know When Buying a Diamond Ring

Ringgold

To begin our feature on different sorts of gems, we will certainly begin with the best and most well understood gems of them all the ruby. The diamond is the utmost gems. It has very couple of weaknesses as well as numerous staminas. It sparkles with its phenomenal worth as well as sentimental value. It is utilized in wedding event rings to represent countless love or utilized as gifts/jewelry to be provided to enjoyed ones. Yet the diamond is so a lot greater than its eternal beauty.

The ruby derives its name from the Greek work adamas meaning irresistible. In hardness, there is no contrast. The ruby rates in the Mohs scale a 10 which is the hardest substance in the world. Its reducing resistance is 140 times that of the ruby and sapphire, the gemstones(Diamond) that are following in the Mohs range in solidity. The ruby's optical residential properties such as luster and also rigidity make it distinct as well as quickly differentiated from other imitations. Enjoy!

* Background of Diamonds

The initial recorded diamond go back around 800 B.C. in India. Some think it also went back 6,000 years earlier. The rubies were made use of as attractive functions and likewise as talismans to prevent evil and give security in fight. Throughout the Dark Ages, rubies were even stated to be used as a medical help. Religious physicians even told individuals that if they hold a diamond in a hand and make the indication of the cross would certainly, it would certainly cure and ailment as well as recover injuries.

Diamonds came to be extra prominent during the 19th century because of discovery of ruby deposits in South Africa. This exploration brings about enhanced supply, enhanced reducing as well as polishing techniques, and development in economy. In 1979, rock hounds located the Argyle pipe in Australia which to this date is the richest ruby down payment in the globe. Argyle, ever since, alone is in charge of providing over one third of the world's rubies every year.

* Diamonds: Just how are they created?

Rubies contains an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Diamonds are produced 90 miles under the Earth's surface at temperature levels of about 2200 levels Fahrenheit. Rubies are developed deep within the earth and eventually, over very extended periods of time, push their method to the earth's surface, normally via volcanic eruptions.

The age of these diamonds from underneath the surface area of the planet are from 1 to 3.3 billion years of ages! When rubies are developed and also start their ascent to the earth's surface area, they experience channels where the magma from the volcano rises to the surface, getting diamonds along the way and also ultimately depositing them on the surface area, where they are ultimately located and extracted.

* The 4 C's of Diamonds

There are 4 distinct features that figure out the worth and quality of a ruby. These are the shade, cut, clarity and carat. Otherwise recognized as the 4 C's of a diamond. In the complying with, we will certainly discuss these functions thoroughly.

* Color

In the last newsletter, we touch based on the shade of gems as being one of the most vital feature because of the truth that shade is one of the most apparent function. The perfect ruby should show up clear and anemic but this is not the situation for all diamonds. Diamonds could come in any shade of the rainbow most typical shade is a shade of yellow or brown. The Geological Institute of America(GIA) have created a standard to quality diamond shade. This guideline contains a text system that varies from the alphabet D - Z. Please see listed below:

D E F No Color G H I J Virtually Colorless K L M Faintly colored, can not hardly be seen and generally yellow in shade N O P Q R Gently tinted, usually yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, starts from yellow as well as proceeds to brownish

* Quality

The cut a ruby is established by the ruby's percentage such as its shape, width as well as depth. The cut establishes what is called the diamond's "sparkle". Also if the diamond itself has best color as well as clarity, with a poor cut the ruby will have a plain radiance. This is because the cut identifies just how light trips within the diamond. The Gemological Institute of The U.S.A. has actually additionally created a clarity grading system to rank diamond clearness. This grading system includes Flawless (Fl), Inside Flawless (IF), Very Really Somewhat Consisted Of (VV1 or VV2), Very A Little Consisted Of(VS1 or VS2), A Little Included(SI1 or SI2), and also Consisted Of(I1, I2, as well as I3). Although this system had been added to the diamond market, it is not commonly made use of. This results from that it took a great deal of method as well as training to incorporate it.

* Cut

The cut a ruby is figured out by the ruby's proportion such as its shape, width and deepness. The cut identifies exactly what is called the diamond's "radiance". Also if the diamond itself has ideal shade and quality, with an inadequate cut the ruby will certainly have a dull radiance. This is because the cut figures out how light travels within the diamond.

There are 3 kinds of cuts that can figure out the ruby's brilliance. These are a shallow cut, a cut that is also deep as well as optimal cut. A superficial cut is a cut of a ruby that is too reduced, that light traveling via it is lost under of the stone as well as does not return into sight. This cut makes a ruby show up drab as well as boring. A cut that is unfathomable is a cut that is too expensive, that light traveling via it leaves via the sides as well as darkens the stone. A suitable cut is an excellent cut on a ruby that mirrors light to the top of the rock, providing it perfect radiance.

* Carat weight

As stated on the last newsletter, a single carat weight(ct) weighs regarding 200 milligrams or.2 grams. For smaller carat diamonds that weigh much less than a carat, it is expressed as points (pt). Factors are 1/100 of a carat. Carat weight of a ruby is very important as a result of that larger rubies are rarer than smaller ones, so generally the larger the diamond the more pricey it is. There is no typical grading system or diagram that could show various carat weight. This is since there are so numerous variations of diamonds fit and cut, that makes stones of comparable weight, look various.

* Imitation Diamonds

Considering that rubies are one of the most useful and also rarest of all the gems, efforts have actually been made to duplicate or perhaps improve rubies utilizing less costly choices. A great deal of times, sincere errors have been made and also these options or other gemstones such as spinel were in some cases puzzled with actual diamonds. Sometimes, some deceitful people attempt to market these choices to misfortunate buyers in order to earnings. Listed below we will go over concerning these choices as well as ways to identify them.

* Synthetic Diamonds

Synthetic diamonds are diamonds that are grown made in a research laboratory. The very first recognized instances of diamond synthesis were asserted to be documented between 1879 - 1928, but this was never confirmed. It wasn't up until the 1940's where research started in the United States, Sweden, Soviet Union started looking into. Artificial rubies are or else called High Stress High Temperature Level (HPHT) diamonds or Chemical Vapor Deposit (CVD) rubies. The name of both these synthetic rubies stems from the procedures made use of to develop them. Several of these synthetic diamonds might either have greater, lesser or similar qualities than that of a diamond. Consequently, these synthetic diamonds are utilized for abrasives, cutting and also polishing tools, and also changes in power stations.

* Simulants

Simulants are non-diamond substances that are made use of to reproduce the look or even the shape of a diamond. One of the most fundamental and also popular simulant is cubic zirconia (CZ). CZ at ordinary view could glimmer greater than a ruby and it is less thick, implying that a 1 carat weight CZ will certainly be a lot bigger compared to a 1 carat ruby. Nowadays, an extra prominent simulant is moissanite, which has all the exact same attributes of a diamond. These characteristics include solidity (Moissanite-9.25 as well as diamond-10 in Mohs scale), refractive index(Moissanite -2.65 as well as diamond -2.42) and diffusion (Moissanite -.104 as well as ruby -.044). This makes it tough to separate both at plain view as well as would often require testers to inform the distinction. In the next area we will certainly go over exactly how to recognize moissanites as well as various other replicas.

* Real or Fake?

An old technique of recognizing rubies is to do a scrape examination. This needs scraping a ruby with an additional ruby which is damaging and also is seldom used nowadays. The ideal as well as most reliable way to check for diamonds is to utilize testers that utilize thermal conductivity. These testers consist of battery powered thermistors placed with a retractable copper tip. This tester functions by injecting the warm into the examined rock and afterwards the device determines the amount of warmth that it carries out. However thermal conductivity testers works best to differentiate rubies and also its other simulants, it will certainly not aid identify laboratory produced or artificial stones. To be able to determine these, certain optical strategies are required. Laboratories make use of strategies such as spectroscopy, microscopy and luminescence in order to figure out a specific stones origin. The average person could make use of loupes as well as microscopes to identify artificial rocks. All-natural rubies generally have minor imperfections as well as imperfections such as additions or some type of international product, which will not be found in synthetics.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Wedding Rings For Men And Women online Ringgold

For centuries in Ringgold , diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores in Ringgold . These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings in Ringgold . These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman’s best friend.

 

eternity ring

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

1 ct wedding band

What You Should Know When Buying a Diamond Ring

Ringgold

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

White Gold Tennis Bracelet online Texas