5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.
Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To begin our feature on various types of gemstones, we will certainly begin with the very best and also most well known gemstone of them all the diamond. The ruby is the ultimate gems. It has extremely few weaknesses and many staminas. It shines with its remarkable value and also emotional value. It is utilized in wedding celebration rings to stand for endless love or utilized as gifts/jewelry to be provided to liked ones. However the diamond is a lot more compared to its infinite beauty.
The diamond derives its name from the Greek work adamas indicating irresistible. In firmness, there is no contrast. The diamond rates in the Mohs scale a 10 which is the hardest compound on Earth. Its cutting resistance is 140 times that of the ruby and sapphire, the gemstones(Corundum) that are next in the Mohs scale in hardness. The diamond's optical properties such as luster as well as rigidity make it unique and also quickly distinguished from various other replicas. Delight in!
* History of Diamonds
The first recorded diamond dates back around 800 B.C. in India. Some think it even went back 6,000 years back. The diamonds were made use of as decorative objectives and as amulets to prevent evil and offer protection in fight. During the Dark Ages, diamonds were even stated to be used as a clinical help. Spiritual physicians even informed patients that if they hold a diamond in a hand and make the indication of the cross would certainly, it would cure as well as illness as well as heal injuries.
Diamonds came to be much more popular during the 19th century because of exploration of ruby down payments in South Africa. This discovery causes increased supply, enhanced reducing and also polishing techniques, and development in economic climate. In 1979, geologists located the Argyle pipeline in Australia which to this date is the wealthiest diamond deposit in the globe. Argyle, considering that after that, alone is in charge of providing over one third of the globe's diamonds every year.
* Diamonds: How are they formed?
Rubies is composed of an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Diamonds are created 90 miles under the Planet's surface at temperature levels of concerning 2200 degrees Fahrenheit. Diamonds are developed deep within the earth as well as at some point, over incredibly lengthy periods of time, press their means to the earth's surface area, usually through volcanic eruptions.
The age of these rubies from underneath the surface area of the earth are from 1 to 3.3 billion years old! When rubies are developed and also begin their climb to the earth's surface area, they experience networks where the lava from the volcano climbs to the surface area, getting rubies along the method and eventually depositing them externally, where they are ultimately found and also mined.
* The 4 C's of Diamonds
There are 4 unique qualities that identify the value and also quality of a diamond. These are the color, cut, clearness and carat weight. Or else called the 4 C's of a ruby. In the adhering to, we will discuss these attributes thoroughly.
In the last newsletter, we touch based on the shade of gemstones as being the most crucial function due to that color is one of the most noticeable feature. The ideal ruby needs to show up clear and also anemic yet this is not the situation for all rubies. Diamonds could be available in any type of shade of the rainbow most common shade is a color of yellow or brown. The Geological Institute of America(GIA) have devised a guideline to quality diamond shade. This standard contains a lettering system that varies from the alphabet D - Z. Please see listed below:
D E F No Color G H I J Almost Anemic K L M Faintly colored, cannot barely be seen and usually yellow in color N O P Q R Gently tinted, usually yellow. Could be seen with the nude eye S T U V W X Y Z Tinted, begins with yellow and proceeds to brownish
The cut a diamond is established by the ruby's percentage such as its shape, size as well as deepness. The cut establishes exactly what is called the diamond's "radiance". Even if the ruby itself has excellent shade and also clearness, with an inadequate cut the diamond will certainly have a plain brilliance. This is because the cut figures out just how light travels within the ruby. The Gemological Institute of The U.S.A. has also designed a clarity grading system to place ruby clearness. This grading system includes Remarkable (Fl), Inside Perfect (IF), Extremely Very A Little Included (VV1 or VV2), Very Slightly Consisted Of(VS1 or VS2), Slightly Included(SI1 or SI2), as well as Consisted Of(I1, I2, as well as I3). Although this system had been added to the ruby sector, it is not widely used. This is because of the truth that it took a whole lot of method and training to incorporate it.
The cut a ruby is identified by the ruby's percentage such as its form, size as well as depth. The cut establishes what is called the diamond's "luster". Even if the ruby itself has perfect color and quality, with an inadequate cut the ruby will have a plain radiance. This is because the cut establishes how light journeys within the ruby.
There are 3 kinds of cuts that can identify the ruby's radiance. These are a shallow cut, a cut that is also deep and also suitable cut. A shallow cut is a cut of a ruby that is too low, that light taking a trip with it is lost under of the rock and does not return into sight. This cut makes a diamond show up drab and plain. A cut that is unfathomable is a cut that is too expensive, that light taking a trip via it runs away through the sides as well as darkens the stone. A suitable cut is an ideal cut on a diamond that shows light to the top of the rock, giving it ideal sparkle.
* Carat weight
As specified on the last e-newsletter, a single carat weight(ct) evaluates concerning 200 milligrams or.2 grams. For smaller sized carat weight diamonds that consider much less than a carat weight, it is shared as factors (pt). Factors are 1/100 of a carat. Carat weight of a diamond is very important due to the reality that larger rubies are rarer than smaller ones, so primarily the bigger the diamond the extra costly it is. There is no conventional grading system or representation that could show various carat weight. This is because there are numerous variations of rubies fit and also cut, makings stones of comparable weight, look different.
* Replica Diamonds
Since diamonds are the most beneficial as well as rarest of all the gems, initiatives have been made to duplicate or also enhance rubies making use of cheaper options. A whole lot of times, sincere blunders have actually been made and these choices or other gems such as spinel were occasionally puzzled with actual rubies. In some instances, some deceitful people try to sell these choices to misfortunate purchasers in order to profit. Below we will certainly discuss regarding these choices and ways to recognize them.
* Synthetic Diamonds
Synthetic rubies are rubies that are expanded made in a research laboratory. The very first known cases of diamond synthesis were claimed to be documented in between 1879 - 1928, but this was never verified. It had not been till the 1940's where research began in the United States, Sweden, Soviet Union began investigating. Synthetic rubies are otherwise called High Pressure High Temperature (HPHT) diamonds or Chemical Vapor Down Payment (CVD) rubies. The name of both these synthetic diamonds stems from the procedures used to create them. Several of these artificial rubies could either have higher, lower or similar attributes compared to that of a diamond. Consequently, these artificial diamonds are used for abrasives, reducing as well as polishing tools, and also switches in power plant.
Simulants are non-diamond compounds that are utilized to reproduce the appearance as well as the form of a diamond. The most fundamental and also well understood simulant is cubic zirconia (CZ). CZ at simple view can sparkle greater than a ruby as well as it is much less dense, suggesting that a 1 carat CZ will certainly be much bigger compared to a 1 carat ruby. Nowadays, a much more prominent simulant is moissanite, which has all the same characteristics of a ruby. These characteristics consist of hardness (Moissanite-9.25 and also diamond-10 in Mohs scale), refractive index(Moissanite -2.65 as well as ruby -2.42) and dispersion (Moissanite -.104 and also diamond -.044). This makes it difficult to differentiate both at simple sight as well as would typically require testers to discriminate. In the following area we will certainly go over the best ways to recognize moissanites and also other replicas.
* Real or Counterfeit?
An old technique of recognizing rubies is to do a scrape examination. This needs damaging a diamond with another ruby which is destructive and also is rarely made use of nowadays. The very best and also most trusted method to examine for rubies is to use testers that utilize thermal conductivity. These testers include battery powered thermistors mounted with a retractable copper pointer. This tester works by injecting the heat into the tested stone then the gadget measures the amount of warm that it conducts. Nevertheless thermal conductivity testers works best to distinguish rubies and its other simulants, it will not assist differentiate laboratory developed or artificial rocks. To be able to recognize these, specific optical strategies are needed. Laboratories use methods such as spectroscopy, microscopy and luminescence in order to determine a certain stones origin. The average person could utilize loupes and also microscopes to identify artificial rocks. Natural rubies usually have minor flaws as well as flaws such as additions or some type of foreign product, which will not be discovered in synthetics.
Start With the Fundamentals When Intrigued in Acquiring Diamond Precious Jewelry.
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.