5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Millbrae, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Millbrae, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Millbrae. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Millbrae to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Millbrae for you engagement or wedding.
Millbrae How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To start our feature on different kinds of gemstones, we will begin with the ideal and most popular gemstone of them all the ruby. The ruby is the utmost gems. It has very couple of weak points as well as many strengths. It shines with its extraordinary worth and also emotional value. It is utilized in wedding event rings to stand for unlimited love or used as gifts/jewelry to be offered to enjoyed ones. However the diamond is a lot greater than its infinite appeal.
The ruby acquires its name from the Greek job adamas suggesting unsurpassable. In firmness, there is no contrast. The diamond rates in the Mohs scale a 10 which is the hardest material in the world. Its reducing resistance is 140 times that of the ruby as well as sapphire, the gems(Diamond) that are following in the Mohs scale in firmness. The diamond's optical residential properties such as radiance and rigidity make it unique as well as quickly identified from other imitations. Take pleasure in!
* Background of Diamonds
The very first videotaped ruby go back around 800 B.C. in India. Some think it even went back 6,000 years ago. The rubies were used as attractive functions and additionally as amulets to ward off evil and also provide security in fight. During the Dark Ages, rubies were also specified to be used as a clinical aid. Religious physicians even informed people that if they hold a diamond in a hand and make the indicator of the cross would certainly, it would heal as well as disease as well as heal wounds.
Rubies ended up being much more popular throughout the 19th century as a result of exploration of diamond down payments in South Africa. This exploration leads to boosted supply, boosted cutting as well as polishing techniques, and development in economic situation. In 1979, geologists located the Argyle pipe in Australia which to this date is the richest diamond down payment on the planet. Argyle, ever since, alone is accountable for providing over one third of the globe's diamonds yearly.
* Diamonds: How are they formed?
Rubies contains an allotrope of carbons that are created in high-pressure, high-temperature conditions. Diamonds are generated 90 miles under the Planet's surface area at temperatures of regarding 2200 levels Fahrenheit. Diamonds are created deep within the earth and also eventually, over extremely lengthy durations of time, press their way to the planet's surface, generally via volcanic eruptions.
The age of these rubies from beneath the surface of the earth are from 1 to 3.3 billion years of ages! When rubies are developed and also begin their climb to the earth's surface, they experience networks where the magma from the volcano rises to the surface, grabbing diamonds in the process and also ultimately depositing them externally, where they are ultimately discovered as well as mined.
* The 4 C's of Diamonds
There are four distinct characteristics that identify the value and also top quality of a ruby. These are the shade, cut, clearness and carat. Or else called the 4 C's of a ruby. In the adhering to, we will speak about these features thoroughly.
In the last e-newsletter, we touch based on the color of gems as being the most essential feature because of the truth that shade is the most apparent feature. The perfect diamond ought to appear clear and also colorless but this is not the situation for all rubies. Rubies could can be found in any kind of color of the rainbow most common color is a shade of yellow or brownish. The Geological Institute of The U.S.A.(GIA) have created a guideline to quality ruby shade. This standard includes a text system that varies from the alphabet D - Z. Please see listed below:
D E F No Shade G H I J Almost Anemic K L M Faintly colored, can't hardly be seen and also usually yellow in color N O P Q R Gently tinted, usually yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, starts from yellow as well as progresses to brownish
The cut a ruby is determined by the ruby's proportion such as its form, size and depth. The cut determines what is called the ruby's "luster". Also if the ruby itself has best color as well as clearness, with an inadequate cut the ruby will certainly have a plain radiance. This is since the cut determines exactly how light journeys within the ruby. The Gemological Institute of The U.S.A. has actually additionally devised a clarity grading system to rate ruby quality. This grading system includes Remarkable (Fl), Inside Remarkable (IF), Extremely Very A Little Included (VV1 or VV2), Really Slightly Consisted Of(VS1 or VS2), Slightly Included(SI1 or SI2), and Consisted Of(I1, I2, and also I3). Although this system had actually been contributed to the diamond market, it is not commonly utilized. This results from the truth that it took a great deal of technique and also training to incorporate it.
The cut a ruby is identified by the diamond's percentage such as its shape, width and deepness. The cut identifies just what is called the diamond's "radiance". Also if the ruby itself has excellent shade as well as clarity, with a bad cut the diamond will have a dull sparkle. This is because the cut figures out exactly how light journeys within the diamond.
There are 3 sorts of cuts that can determine the diamond's sparkle. These are a shallow cut, a cut that is also deep and also ideal cut. A shallow cut is a cut of a diamond that is too reduced, that light traveling via it is shed under of the rock and also does not return into sight. This cut makes a diamond show up lifeless as well as plain. A cut that is also deep is a cut that is too high, that light taking a trip via it leaves with the sides as well as dims the rock. An optimal cut is an ideal cut on a ruby that shows light to the top of the rock, giving it perfect radiance.
As mentioned on the last e-newsletter, a solitary carat(ct) evaluates concerning 200 milligrams or.2 grams. For smaller carat weight diamonds that consider much less than a carat weight, it is shared as points (pt). Points are 1/100 of a carat weight. Carat weight of a diamond is vital because of that bigger rubies are rarer compared to smaller ones, so primarily the larger the diamond the more costly it is. There is no common grading system or diagram that could show various carat weight. This is due to the fact that there are so numerous variations of diamonds in shape and also cut, which makes stones of comparable weight, look different.
* Replica Diamonds
Because diamonds are the most useful and also rarest of all the gems, initiatives have been made to replicate or perhaps enhance diamonds making use of cheaper alternatives. A great deal of times, straightforward blunders have actually been made and also these alternatives or various other gemstones such as spinel were sometimes perplexed with real diamonds. In some situations, some deceitful people aim to offer these alternatives to misfortunate customers in order to profit. Below we will review regarding these choices and methods to recognize them.
* Artificial Diamonds
Artificial diamonds are diamonds that are grown manufactured in a laboratory. The very first well-known situations of diamond synthesis were asserted to be recorded between 1879 - 1928, yet this was never confirmed. It wasn't until the 1940's where study began in the United States, Sweden, Soviet Union started looking into. Artificial rubies are otherwise referred to as High Pressure High Temperature Level (HPHT) diamonds or Chemical Vapor Deposit (CVD) diamonds. The name of both these artificial diamonds originates from the processes used to produce them. Several of these synthetic diamonds can either have greater, minimal or similar characteristics compared to that of a diamond. As a result, these synthetic rubies are used for abrasives, reducing as well as brightening tools, as well as switches over in power stations.
Simulants are non-diamond substances that are made use of to reproduce the appearance as well as the form of a diamond. One of the most basic and also well understood simulant is cubic zirconia (CZ). CZ at plain sight could shimmer greater than a diamond and it is much less dense, meaning that a 1 carat CZ will be a lot larger than a 1 carat diamond. Nowadays, a much more preferred simulant is moissanite, which has all the exact same qualities of a ruby. These features consist of hardness (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 and also ruby -2.42) as well as dispersion (Moissanite -.104 and also ruby -.044). This makes it hard to distinguish the two at plain view as well as would certainly typically need testers to discriminate. In the following area we will certainly review the best ways to identify moissanites and also various other imitations.
* Actual or Counterfeit?
An old method of identifying rubies is to do a scrape test. This calls for scraping a ruby with one more ruby which is damaging as well as is hardly ever utilized nowadays. The most effective as well as most reputable way to check for diamonds is to use testers that use thermal conductivity. These testers are composed of battery powered thermistors mounted with a retracting copper pointer. This tester works by injecting the heat into the examined stone then the tool gauges the quantity of warm that it carries out. Nevertheless thermal conductivity testers functions best to identify diamonds and its other simulants, it will certainly not aid differentiate laboratory created or artificial rocks. To be able to recognize these, certain optical strategies are required. Laboratories make use of techniques such as spectroscopy, microscopy and luminescence in order to determine a certain stones origin. The average person could use loupes and microscopes to distinguish synthetic stones. All-natural rubies generally have small blemishes and problems such as additions or some kind of international product, which will certainly not be discovered in synthetics.
Clearness Boosted Diamonds - Some Points You Required to Know!
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.