5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Wardtown, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Wardtown, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Wardtown. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Wardtown to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Wardtown for you engagement or wedding.
Wardtown How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.
How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To begin our attribute on different kinds of gems, we will start with the very best and most well understood gems of them all the diamond. The diamond is the supreme gemstone. It has very couple of weak points as well as lots of staminas. It glows with its phenomenal value and also emotional worth. It is used in wedding celebration rings to represent countless love or made use of as gifts/jewelry to be provided to enjoyed ones. Yet the ruby is a lot greater than its timeless appeal.
The diamond obtains its name from the Greek work adamas indicating irresistible. In firmness, there is no comparison. The ruby prices in the Mohs range a 10 which is the hardest compound on Planet. Its reducing resistance is 140 times that of the ruby as well as sapphire, the gems(Corundum) that are next in the Mohs scale in firmness. The ruby's optical residential properties such as luster as well as rigidity make it distinct and conveniently identified from other imitations. Appreciate!
* Background of Diamonds
The initial recorded diamond go back around 800 B.C. in India. Some think it even dated back 6,000 years earlier. The rubies were made use of as decorative functions as well as also as talismans to fend off wicked as well as provide protection in fight. Throughout the Dark Ages, rubies were also stated to be made use of as a medical help. Spiritual physicians also told individuals that if they hold a ruby in a hand and make the indicator of the cross would certainly, it would cure as well as health problem and heal injuries.
Rubies became much more popular during the 19th century due to discovery of diamond down payments in South Africa. This exploration causes increased supply, enhanced cutting as well as polishing techniques, and also development in economic climate. In 1979, rock hounds found the Argyle pipeline in Australia which to this date is the richest diamond deposit in the world. Argyle, ever since, alone is accountable for supplying over one third of the globe's diamonds each year.
* Diamonds: How are they formed?
Rubies contains an allotrope of carbons that are created in high-pressure, high-temperature problems. Rubies are generated 90 miles under the Planet's surface at temperature levels of concerning 2200 degrees Fahrenheit. Diamonds are developed deep within the planet as well as at some point, over exceptionally extended periods of time, press their method to the earth's surface area, usually via volcanic eruptions.
The age of these rubies from beneath the surface area of the earth are from 1 to 3.3 billion years of ages! When rubies are created and also begin their ascent to the planet's surface area, they go with channels where the lava from the volcano rises to the surface area, grabbing rubies along the means and at some point depositing them externally, where they are at some point located and also extracted.
* The 4 C's of Diamonds
There are 4 distinctive features that identify the value and quality of a diamond. These are the shade, cut, clarity and also carat weight. Otherwise recognized as the 4 C's of a diamond. In the adhering to, we will certainly speak about these functions thoroughly.
In the last newsletter, we touch based on the shade of gems as being the most vital feature due to that shade is the most obvious function. The perfect ruby ought to show up clear and colorless however this is not the case for all rubies. Diamonds can come in any kind of color of the rainbow most typical shade is a color of yellow or brown. The Geological Institute of The U.S.A.(GIA) have devised a standard to grade diamond color. This guideline consists of a text system that ranges from the alphabet D - Z. Please see listed below:
D E F No Shade G H I J Almost Colorless K L M Faintly tinted, can't barely be seen and also usually yellow in color N O P Q R Lightly tinted, usually yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins with yellow and advances to brown
The cut a diamond is established by the diamond's proportion such as its shape, width and deepness. The cut determines exactly what is called the ruby's "radiance". Even if the diamond itself has best color and also clearness, with a poor cut the ruby will certainly have a boring brilliance. This is since the cut determines how light journeys within the diamond. The Gemological Institute of The U.S.A. has likewise devised a quality grading system to rank diamond clarity. This grading system includes Remarkable (Fl), Inside Remarkable (IF), Very Extremely Somewhat Consisted Of (VV1 or VV2), Extremely A Little Included(VS1 or VS2), Somewhat Included(SI1 or SI2), and Consisted Of(I1, I2, as well as I3). Although this system had actually been added to the ruby sector, it is not extensively made use of. This results from the reality that it took a lot of method and training to integrate it.
The cut a ruby is determined by the diamond's proportion such as its form, width and depth. The cut establishes what is called the ruby's "brilliance". Also if the diamond itself has excellent shade as well as quality, with a poor cut the ruby will certainly have a boring brilliance. This is since the cut identifies exactly how light travels within the ruby.
There are 3 kinds of cuts that can determine the diamond's sparkle. These are a superficial cut, a cut that is unfathomable and optimal cut. A superficial cut is a cut of a diamond that is as well low, that light taking a trip through it is shed under of the rock and does not come back into sight. This cut makes a diamond show up lifeless and dull. A cut that is too deep is a cut that is expensive, that light taking a trip via it escapes via the sides and dims the stone. A suitable cut is an ideal cut on a ruby that reflects light to the top of the rock, offering it ideal brilliance.
* Carat weight
As mentioned on the last newsletter, a solitary carat weight(ct) considers regarding 200 milligrams or.2 grams. For smaller carat diamonds that consider much less than a carat weight, it is revealed as points (pt). Factors are 1/100 of a carat. Carat weight of a ruby is very important because of that larger rubies are rarer compared to smaller sized ones, so primarily the larger the ruby the much more pricey it is. There is no common grading system or representation that could show different carat weight. This is since there are numerous variants of rubies fit as well as cut, makings rocks of similar weight, look different.
* Imitation Diamonds
Given that rubies are one of the most useful and rarest of all the gems, initiatives have been made to replicate or also enhance diamonds using less pricey alternatives. A great deal of times, sincere mistakes have been made and also these options or other gems such as spinel were sometimes confused with genuine diamonds. In many cases, some dishonest individuals attempt to market these alternatives to misfortunate buyers in order to earnings. Listed below we will discuss concerning these choices as well as methods to recognize them.
* Artificial Diamonds
Synthetic diamonds are diamonds that are expanded manufactured in a lab. The first well-known cases of diamond synthesis were declared to be recorded between 1879 - 1928, yet this was never validated. It wasn't until the 1940's where study began in the USA, Sweden, Soviet Union began investigating. Artificial rubies are or else referred to as High Pressure Heat (HPHT) diamonds or Chemical Vapor Deposit (CVD) diamonds. The name of both these artificial diamonds originates from the processes utilized to create them. A few of these synthetic rubies can either have greater, minimal or similar features compared to that of a ruby. Consequently, these synthetic diamonds are made use of for abrasives, reducing and also polishing tools, as well as switches over in power terminals.
Simulants are non-diamond compounds that are used to replicate the look as well as the shape of a diamond. One of the most basic and also well understood simulant is cubic zirconia (CZ). CZ at plain sight could shimmer more compared to a diamond as well as also it is less thick, implying that a 1 carat CZ will be a lot larger than a 1 carat diamond. Nowadays, a much more preferred simulant is moissanite, which has just the same features of a ruby. These characteristics consist of solidity (Moissanite-9.25 as well as diamond-10 in Mohs range), refractive index(Moissanite -2.65 as well as diamond -2.42) and also diffusion (Moissanite -.104 and also ruby -.044). This makes it tough to set apart both at simple view and would certainly often call for testers to discriminate. In the next area we will talk about ways to recognize moissanites as well as other imitations.
* Real or Counterfeit?
An old approach of determining diamonds is to do a scratch examination. This needs damaging a ruby with one more diamond which is devastating and is rarely used nowadays. The very best and most dependable means to examine for diamonds is to use testers that utilize thermal conductivity. These testers include battery powered thermistors installed with a retracting copper suggestion. This tester works by injecting the heat into the tested stone then the tool measures the amount of warmth that it conducts. However thermal conductivity testers works best to identify diamonds and also its various other simulants, it will certainly not help identify laboratory developed or artificial stones. To be able to recognize these, certain optical strategies are required. Laboratories utilize strategies such as spectroscopy, microscopy and also luminescence in order to identify a certain stones origin. The average person could use loupes and also microscopic lens to differentiate artificial rocks. Natural diamonds generally have small blemishes and also flaws such as inclusions or some kind of foreign material, which will certainly not be discovered in synthetics.