5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.
Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To start our feature on different sorts of gems, we will certainly begin with the very best and also most popular gems of them all the diamond. The ruby is the utmost gems. It has few weak points and several strengths. It glows with its extraordinary worth and also emotional value. It is used in wedding celebration rings to stand for limitless love or used as gifts/jewelry to be provided to liked ones. However the diamond is a lot more than its timeless elegance.
The ruby acquires its name from the Greek work adamas indicating irresistible. In firmness, there is no contrast. The diamond prices in the Mohs scale a 10 which is the hardest material in the world. Its cutting resistance is 140 times that of the ruby as well as sapphire, the gemstones(Corundum) that are following in the Mohs scale in hardness. The ruby's optical residential or commercial properties such as appeal and rigidity make it one-of-a-kind and also easily differentiated from various other imitations. Take pleasure in!
* History of Diamonds
The initial recorded diamond go back around 800 B.C. in India. Some believe it even dated back 6,000 years earlier. The diamonds were made use of as ornamental objectives as well as likewise as amulets to fend off bad as well as supply defense in battle. Throughout the Dark Ages, diamonds were even mentioned to be made use of as a clinical aid. Religious physicians also told people that if they hold a ruby in a hand and make the sign of the cross would certainly, it would treat and also ailment and recover wounds.
Diamonds came to be more preferred throughout the 19th century because of discovery of diamond down payments in South Africa. This discovery brings about increased supply, boosted cutting and also brightening methods, as well as growth in economic situation. In 1979, geologists discovered the Argyle pipeline in Australia which to this day is the richest ruby down payment on the planet. Argyle, ever since, alone is liable for providing over one third of the world's diamonds every year.
* Diamonds: How are they developed?
Rubies includes an allotrope of carbons that are created in high-pressure, high-temperature conditions. Rubies are generated 90 miles under the Earth's surface area at temperature levels of regarding 2200 levels Fahrenheit. Rubies are developed deep within the planet and also ultimately, over very long durations of time, press their method to the planet's surface area, generally via volcanic eruptions.
The age of these diamonds from underneath the surface of the planet are from 1 to 3.3 billion years of ages! When rubies are formed and begin their climb to the earth's surface, they go via channels where the magma from the volcano increases to the surface area, selecting up rubies in the process as well as ultimately depositing them externally, where they are at some point discovered and also extracted.
* The 4 C's of Diamonds
There are 4 unique attributes that identify the worth as well as high quality of a diamond. These are the color, cut, clarity and also carat. Otherwise called the 4 C's of a diamond. In the following, we will certainly discuss these attributes carefully.
In the last newsletter, we touch based on the shade of gemstones as being the most important attribute due to that color is the most noticeable feature. The excellent diamond needs to appear clear and colorless but this is not the situation for all rubies. Diamonds can can be found in any kind of shade of the rainbow most common color is a shade of yellow or brown. The Geological Institute of America(GIA) have developed a guideline to quality ruby color. This guideline includes a lettering system that varies from the alphabet D - Z. Please see below:
D E F No Color G H I J Nearly Anemic K L M Faintly colored, can not barely be seen as well as typically yellow in color N O P Q R Gently tinted, generally yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins with yellow and progresses to brownish
The cut a diamond is determined by the ruby's percentage such as its shape, size and also deepness. The cut determines just what is called the ruby's "radiance". Also if the diamond itself has perfect color and also quality, with an inadequate cut the ruby will have a dull brilliance. This is since the cut establishes how light trips within the diamond. The Gemological Institute of The U.S.A. has actually additionally devised a clarity grading system to rate diamond clearness. This grading system consists of Perfect (Fl), Internally Flawless (IF), Really Very Slightly Consisted Of (VV1 or VV2), Very Slightly Consisted Of(VS1 or VS2), Somewhat Consisted Of(SI1 or SI2), as well as Included(I1, I2, and also I3). Although this system had actually been contributed to the ruby market, it is not widely made use of. This results from the fact that it took a lot of method and training to integrate it.
The cut a diamond is figured out by the ruby's proportion such as its form, size and also deepness. The cut determines exactly what is called the diamond's "brilliance". Also if the diamond itself has excellent shade and also clarity, with a poor cut the ruby will certainly have a boring brilliance. This is due to the fact that the cut figures out how light journeys within the diamond.
There are 3 sorts of cuts that can figure out the ruby's radiance. These are a shallow cut, a cut that is unfathomable as well as suitable cut. A shallow cut is a cut of a ruby that is also low, that light taking a trip with it is lost on the base of the stone and also does not return right into view. This cut makes a ruby show up drab and also boring. A cut that is as well deep is a cut that is also high, that light traveling with it leaves through the sides and also darkens the rock. An optimal cut is an ideal cut on a diamond that reflects light to the top of the stone, providing it ideal sparkle.
* Carat weight
As stated on the last newsletter, a single carat weight(ct) considers concerning 200 milligrams or.2 grams. For smaller sized carat weight rubies that weigh much less than a carat, it is revealed as points (pt). Factors are 1/100 of a carat. Carat weight of a diamond is essential due to the reality that bigger rubies are rarer compared to smaller sized ones, so generally the bigger the diamond the more expensive it is. There is no common grading system or layout that could reveal various carat weight. This is since there are so lots of variants of rubies in shape as well as cut, which makes stones of similar weight, look various.
* Replica Diamonds
Given that diamonds are the most important as well as rarest of all the gemstones, initiatives have been made to replicate and even boost diamonds using much less costly options. A great deal of times, straightforward mistakes have actually been made and these choices or other gems such as spinel were occasionally perplexed with actual diamonds. In some cases, some unethical people attempt to offer these choices to misfortunate customers in order to revenue. Below we will review concerning these alternatives and means to determine them.
* Artificial Diamonds
Synthetic rubies are diamonds that are grown produced in a laboratory. The initial recognized situations of ruby synthesis were claimed to be documented between 1879 - 1928, however this was never confirmed. It wasn't until the 1940's where study began in the USA, Sweden, Soviet Union began investigating. Artificial diamonds are otherwise called High Pressure High Temperature Level (HPHT) rubies or Chemical Vapor Deposit (CVD) diamonds. The name of both these synthetic rubies acquires from the procedures used to develop them. Several of these synthetic rubies could either have better, lower or comparable characteristics than that of a ruby. Consequently, these synthetic diamonds are utilized for abrasives, cutting and also polishing devices, and switches in power plant.
Simulants are non-diamond materials that are made use of to reproduce the look or even the form of a ruby. One of the most fundamental and also popular simulant is cubic zirconia (CZ). CZ at ordinary view can glimmer even more compared to a ruby and also it is less thick, implying that a 1 carat CZ will certainly be much larger than a 1 carat weight ruby. Nowadays, a more prominent simulant is moissanite, which has all the exact same attributes of a ruby. These attributes consist of solidity (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 and also diamond -2.42) and dispersion (Moissanite -.104 and also diamond -.044). This makes it difficult to distinguish both at ordinary view as well as would often require testers to discriminate. In the following area we will certainly go over just how to identify moissanites and other replicas.
* Real or Counterfeit?
An old approach of determining diamonds is to do a scratch examination. This needs scratching a diamond with one more ruby which is damaging as well as is seldom made use of nowadays. The most effective and most reputable means to check for rubies is to use testers that utilize thermal conductivity. These testers include battery powered thermistors placed with a retractable copper tip. This tester works by injecting the warm into the tested rock and after that the device determines the amount of warm that it performs. Nonetheless thermal conductivity testers works best to identify rubies as well as its various other simulants, it will not aid identify lab produced or artificial stones. To be able to recognize these, particular optical techniques are required. Laboratories utilize techniques such as spectroscopy, microscopy and also luminescence in order to establish a particular stones origin. The typical person can use loupes and microscopic lens to identify synthetic stones. All-natural rubies generally have small imperfections as well as imperfections such as inclusions or some kind of international material, which will certainly not be found in synthetics.
Purchasing Diamonds Online - Is This Online Jewelry Expert Right For You?
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.