Emerald Cut Morganite Rose Gold Ring in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

diamond ring price

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Not all sellers offer diamond grading laboratory records (aka ruby top quality records) to their customers. So my general suggestions to you is to maintain your money in your pocket when taking care of such jewelers.

Just acquire a diamond interaction ring if it features the original diamond high quality report.

A lab report is an independent assessment of the 4Cs of a loosened ruby and includes a plotted layout of the stone's quality qualities and also a visuals depiction of the rock's proportions. Having such a report enables you to contrast diamonds of different high qualities and eventually assists you make a more notified getting decision.

A store may cut edges as well as not offer a lab report or a dishonest seller might offer a phony one due to the moment, problem and also cost he'll bear to obtaining a rock graded.

Yeah - there is a rate for grading a diamond (though that price is ultimately paid by the customer), plus the delivery and insurance fees for sending the diamond to the lab. And also let us not forget the possibility cost of a jewelry expert not having the diamond in his shop available for sale for a couple of weeks while the grading takes area.

However, a ruby grading report could likewise not be readily available since the costs to obtaining one might influence as well heavily on the last price of the ring. For instance, a 0.3 ct diamond ring costing $250 claim, might cost around $75 to be graded as well as have the record number inscribed on the band on the ruby. As you browse for that optimal diamond interaction ring for your sweetheart, you'll discover that there is a hodgepodge of labs asserting to provide trusted ruby grading records. Yet I would only put my loan on ...

The Premier Ruby Grading Lab Reports

Yes, all diamond quality reports are not developed equal. Within the sector, it is an agreement that the 2 leading laboratories are GIA-GTL (Gemological Institute of The U.S.A.'s Treasure Profession Laboratory) and the AGS (American Gem Culture Laboratories).

The GCAL (Treasure Accreditation as well as Guarantee Laboratory) likewise supplies very concerned records or "ruby certificates" as they are described by GCAL. The GIA has the strongest worldwide credibility for self-reliance and also consistency. As a result of their continuous shade and clearness strictness guidelines, the world's biggest as well as most expensive diamonds have been sent there for rating decades. In 2006, GIA-GTL added a two-dimensional cut grading system for round fantastic diamonds.

AGS utilizes the most strict cut criteria in the market. It utilizes a three-dimensional light efficiency metric that can grade a number of ruby shapes. Actually, it is the only cut grading system that is acknowledged by the scientific community.

What is more, its Ruby High quality File makes use of a special and proprietary 0 to 10 grading system to examine the 4 Cs - a system which is less complicated to understand compared to GIA's grading system. Actually, AGS also goes the added step by corresponding their 0-10 ranking range to other forms of score. For instance, the traditional VS1 ruby quality score is a 3 on the AGS Diamond High Quality Paper.

Ruby Reporting - The Drawbacks

1. Ruby grading is not standardized or controlled and hence you could come across rate 2 labs that utilize looser standards to the rate 1 grading laboratories discussed over. If you buy a ruby that has actually been rated by a tier 2 lab, you may wind up paying a lot more for a minimal top quality diamond. So as an example, a ruby ranked a "F" in color at a tier 2 laboratory might obtain a G, H, or lower color score at a more respectable lab. The sector additionally discounts rubies rated by lesser well-known laboratories by concerning 15-30% or even more. So either you just purchase a diamond graded by a rate 1 laboratory or you approve that you may be acquiring a lesser top quality diamond than exactly what is specified on the record if that ruby is graded by a minimal well-known laboratory.

2. Several large chain stores have big contracts with minimal known laboratories with "softer" ruby grading guidelines. Some of these softer laboratories placed "recommended substitute worths" on the laboratory records - values which are above exactly what stores intends sell the diamonds for. So a salesman in a chain shop may say to you, "Take a look at the lot you are obtaining below. We are offering you this ruby engagement ring for $2500 yet the report says that the recommended substitute worth is $4000." Wow - just what an offer - NOT! This is why it is much better that you rely on only independent rate 1 labs.

Also bear in mind that trustworthy diamond rating reports are not evaluations and don't use appraisal figures. Ruby assessments are frequently grossly inflated as well as are not something you'll intend to rely on.

3. Diamond reports are filled with please notes that specify that absolutely nothing is "accredited" or guaranteed which the labs are not liable for errors. In reality, the GIA supplies a please note of types on their web site relating to using the word "certify." The website says:

"It is wrong to state that trainees, graduates, their services, or particular gemstones are "certified" by GIA. The Gemological Institute of The U.S.A. does not license anybody or anything. Neither a trainee neither a grad who has been awarded a certificate or diploma, neither a gem which has been graded or identified by GIA has been licensed by GIA".

So it is feasible that you the customer is left holding the bag needs to a mistake in a report is later found. Courts have actually regularly ruled that sellers, not laboratories, are in charge of such mistakes. Why? Because the laboratories indicated in advance that their records couldn't be held responsible.

Thankfully, there are a couple ways to offer on your own more buyer security:

A. You can fly to India where jewelry experts provide a life time buyback plan to their clients. Also pricey to fly?

B. You can find among the 20% of US jewelry experts that sell completely bound rubies. These are diamonds that are marketed with lifetime damage, lifetime trade-in and life time buyback policies.

C. Not as excellent a solution as buying a fully adhered diamond yet you could purchase a diamond that includes a real "certification" and also not a record. "Licensed rubies do come with guaranties" albeit for shorter durations.

Certification Some vendors refer to a "diamond report" as a "qualified ruby" however technically this is not deal with. From a lawful standpoint, a diamond report is a just a skilled opinion though in reality, facets of a ruby grading report are not just opinions.

For instance, a ruby's carat weight (weight) can be accurately identified along with its cut quality by measuring its optical effectiveness or by describing a computer version. A certificate on the other hand is a statement of truth - a record for which the provider accepts legal responsibility and also will make restitution to the customer for mistakes.

Some leading diamond grading laboratories use both reports and certificates. AGS supplies Diamond Quality Papers (non-certified reports) and Ruby Quality Certificates. Diamond Top quality Certifications are prepared exclusively for AGS retail jewelry experts and offers guaranties from getting involved American Treasure Culture participant stores.

GCAL certifies it's diamond grading likewise. Its 100% money-back warranty plan stands for a duration of 2 years from the date on the applicable certificate. This plan ensures the accuracy of the cut, color and clarity grades as well as the carat weight.

A report or certificate ought to will have a number on it that could or could not be engraved on a diamond. You will certainly have the ability to get in that number on the website of the certifying lab to examine a record's credibility.

Elements Of A Diamond Grading Record Diamond grading reports are constantly progressing but specific aspect must remain the same. As an example, the:

The Record #. This number is given as well as taped in a laboratory's record and also might or could not be engraved on a diamond's band. You can go into the record number on a grading lab's web site to check the authenticity of the ruby quality report or to obtain more info regarding the diamond. Shape & Aspect Design: This is the summary and also the cutting style made use of for the aspect setup. There are 3 basic facet designs - "great cut, action cut as well as mixed reducing design" as well as 12 basic shapes that include notables such as rounded fantastic and also princess cut" rubies.

Dimensions: This refers to size (not weight) of a ruby. Size consists of dimensions such as size, width, weight and size. A measurement is generally detailed to the hundredth of a millimeter. Dimensions play a big role in just how a ruby glows.

Carat Weight: The weight of a ruby is determined to the hundredth of a carat weight and some also offer such measure to the thousandth of a carat weight (1.123 ct.). Carat weight is the most objective and also the simplest to comprehend of the 4Cs due to the fact that all one needs to do is weight the rock. Color Grade: This tells you the degree of color absence in the ruby. The much less shade the greater the grade.

Diamonds are commonly graded from D-Z; the closer to "D" the whiter the ruby. You must never see diamond shade array such as (G-H, I-J-K, and so on) on a ruby report. You should only see color arrays on evaluations for stones that are placed.

Clarity Grade: Basically every ruby has actually internal imperfections called additions and exterior imperfections called acnes. A diamond is graded according to the dimension, kind, place and also quantity of these flaws.

Clarity qualities vary from Flawless (FL) - Consisted Of. Labs utilize a couple experts to grade the clearness of a ruby in order to develop an extra precise reading.

Cut Grade: More recent diamond reports consist of a cut grade for common round fantastic rubies. Cut takes right into factor to consider the luster, fire and scintillation of the diamond. Cut grade varies from Superb - Poor.

Various other aspects you might encounter on a diamond report include the gloss, proportion, fluorescence and percentage. Armed with this details, you are much better able to make an assessment of the quality of ruby that is placed in an involvement ring.

round engagement rings

How Do You Know If The Diamond Is Fake Or Real Diamond?

Catharpin

Diamonds are naturally readily available in an extremely broad variety of colors. Lots of people understand about anemic rubies as well as GIA's color grading system that is utilized to identify a diamond's body color ... you know D, E, F, and so on. This color grading system is only used to categorize one of the most typical diamond body shade of yellow nevertheless anytime a ruby is located in an additional color like pink, blue, eco-friendly, etc.; after that this diamond is described as a "" fancy ruby"".

All-natural Fancy rubies could be extremely expensive and also often times more expensive than a similar dimension colorless diamond. An extremely great instance of a Fancy diamond is the infamous 45.52 carat weight expensive deep blue diamond, the Hope Ruby, which gets on display screen in the Smithsonian Natural Background Museum in Washington, DC.

A color enhanced ruby is a 100% natural diamond that has had its shade transformed. And also most importantly, color enhanced rubies come in an extremely wide option of shades at extremely cost effective prices!

A little bit of history- For numerous, years it has actually been popular that a diamond's shade could be "" enhanced"" by putting a bit of tinted material externally of a diamond as well as similar to magic ... a diamond that had a recognizable yellow-colored color would certainly transform to an extra appealing near anemic diamond. However, this kind of color improved diamond can transform back to its initial body color if this colored substance was unintentionally gotten rid of. In even more recent years, the technology of color improved diamonds has actually gone extremely high technology. It is now possible to totally alter the shade of a diamond! These procedures are taken into consideration irreversible due to the fact that it does stay secure when subjected to daily regular conditions. The color will certainly not discolor if exposed to sunshine or be cleaned off by extreme chemicals.

Just how is it done? The wanted outcome of any one of these treatments is to have an extra valuable ruby. A much less valuable ruby would be a ruby that has a reduced body shade or sometimes a reduced clearness. The color improved diamond therapy business understand if they start with a certain sort of ruby and procedure it for a certain amount of time that they ought to wind up with a specific color but it does not constantly work in this way. This is a science that does need some art in their processes ... the only procedure that provides consistent outcomes is the finishing process.

The three processes are as adheres to- Refine # 1- HPHT Color Enhanced Diamonds- High Pressure/ High Temperature (HPHT) treatment could enhance the color of specific sorts of brownish diamonds and also hence increase their value. General Electric has actually established a procedure that practically is a mechanical simulation of a diamond's production in nature. The color boosted ruby will be warmed up to a very high temperature level under a very high, stabilized pressure. Mistakes in the crystal framework are after that reorganized resulting in a modification of the ruby's color. Due to the fact that the conditions of HPHT are extremely just like diamond's initial formation, just a well outfitted laboratory will be able to positively determine this kind of shade enhanced diamond. HPHT was first used to turn yellowish diamonds into even more valuable fancy colored boosted rubies, yet currently it is likewise made use of to change some unpopular brownish rubies into better anemic colored improved rubies.

Refine # 2- Irradiated Color Enhanced Diamonds- OK ... do not start obtaining all thrilled because you saw the word irradiated! This is a 100% safe process that is really comparable to just what is used to maintain food by exposing it to a stream of Gamma rays. The shade improved diamond procedure is carried out in a number of various means yet the results are just the same. You start with a reduced color (P, Q, R, etc.) 100% natural diamond that has actually already been reduced as well as brightened, then it is revealed to a stream of quick electrons. Throughout this component of the process the diamond will count on a really dark color due to the fact that some of the atoms in the diamond's crystal structure have actually now been disjointed and this consequently has actually affected the means light go through the diamond. Next the diamond undergoes a controlled home heating (annealing) procedure, this enables a few of those atoms to transfer (partly repaired) in order to acquire a preferred shade.

Process # 3- Covered Color Boosted Diamonds- The layer on polished rubies describes a slim synthetic layer that changes the shade of the diamond. The coating can either be of the wanted color or could trigger a colored interference-effect. However often this process is done to trick a buyer. It is a relatively very easy procedure to execute, it has been around for several years (although the layers products are a lot better currently), and also it does not require a lot of costly advanced devices. Just recently, I have actually seen some pink layered rubies on the market, they are really eye-catching ... as well as of course you would certainly have to buy them knowing that they have actually been coated and also follow your jeweler's standards about owning and looking after these color boosted diamonds. The coating can be put on the entire of a ruby's surface, simply the bottom of the ruby, or to a narrow zone near the girdle. A well-applied finish can change the shade by one or even more shade quality. Some coverings could be eliminated through boiling in acid, solid cleansing remedies, or perhaps home chemicals. Occasionally dots or bigger areas of purple or blue ink are paintinged on the ruby to assist combat a yellowish color. The diamond's setting will usually cover the dots, so they are tough to see in a mounted rock.

So, is a color improved ruby right for you? Possibly ... all-natural fancy shade rubies can be attractive but they are costly! Color improved rubies are economical as well as enable several individuals to possess a brilliantly colored ruby. Ask your local jewelry expert if they have any type of Fancy diamonds ... either all-natural or shade boosted rubies. It is constantly fascinating, and also enjoyable, to consider something various!

Under regular wear the irradiated and HPHT shade boosted diamonds will have no worry of the color fading away. The only consideration will be when you should have any kind of kind of service done on the piece of precious jewelry. If this kind of color improved ruby is exposed to excessive quantities of warmth it might influence the shade. The jeweler will certainly have to understand that the diamond is a color improved ruby prior to any type of job is done as well as then the jeweler will have the ability to select the most effective training course of action. Color enhanced rubies are currently likewise made use of as the tiny accent rubies around a larger anemic ruby. There are lots of exciting items of fashion jewelry offered with tiny blue, yellow, black, or green shade improved rubies.

Since you understand about color boosted diamonds and also someone attempts to offer you on just what they call an all-natural elegant tinted ruby but it is at an extremely deal cost ... you will certainly understand that something simply does not sound best about the deal. A record from a respected grading laboratory must accompany all all-natural Fancy colored diamonds that are marketed as natural. If you deal with a trustworthy firm and also you have actually been comforted regarding just what you are getting, after that you will minimize the opportunity of something poor taking place to you. As with any kind of situation entailing an expensive acquisition of something that not numerous people are experienceded in, education needs to be an important component of your plan. This is much more essential if you plan to purchase a shade improved ruby. Bud Boland has remained in the jewelry organisation for 40 years as well as has done every little thing from watchmaking, diamond setup, precious jewelry production, as well as has actually been a Gemologist for nearly 35 years. He is a Grad Gemologist from GIA (Gemological Institute of America), which is additionally the area where he was an Instructor. He has actually shown concerning diamonds to hundreds of pupils from around the globe

___________________________________________

Rose Gold Diamond Necklace in Virginia

Princess Diamond Ring in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

18k diamond tennis bracelet

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Exactly how are ruby cut qualities appointed?

This is where points begin to get complicated. The approaches used to quantitatively examine the top quality of a cut differ. The method the GIA identifies exactly what a ruby's cut quality must be, as an example, varies in extremely details methods from the means various other certifiers like the AGS do it. Most of the times, these companies do not divulge the exact information of the procedures they utilize.

The shape of a ruby likewise makes a difference with respect to just how its cut quality is established. Although there are some standard standards that continue to be the very same for any kind of kind of ruby, the exact methods utilized to grade a round ruby's cut are different from those utilized to quality a heart-shaped diamond's cut.

The rest of this description will concentrate on round diamonds, as this is by far one of the most usual ruby shape. Among the aspects impacting the cut grade of a rounded ruby is the variety of facets it has. Facets are the flat, defined areas on the surface of a diamond. The aspects on round rubies are usually triangular. Presently, it's believed that the ideal round ruby ought to have 33 aspects on the crown (the area of the ruby that sits above the band, which itself is the largest factor of the ruby) as well as 25 on the structure (the reduced, longer area of the diamond). When there are flaws on the surface area of the diamond, cutters could add extra elements in order to obscure them. This results in a degradation in the general high quality of the cut.

While the element matter is generally concurred upon as an excellent way of judging the high quality of a ruby cut, there are other points on which jewelers regularly disagree. A few of the various other aspects used by some authorities to assist figure out cut qualities include the elevation of the diamond's crown, the depth of the pavilion, the diameter of the table (the top of the crown), as well as the angles of the crown and also structure.

The American Criterion benchmark for rounded diamonds asks for a crown height of 16.2%, pavilion depth of 43.1%, as well as table diameter of 53% of the total band diameter. The Suitable Fantastic benchmark, nonetheless, asks for 19.2% crown height, 40% pavilion depth, and also 56.5% table size. While these differences might be challenging for amateurs to discern, they are a great image of the troubles connected with creating a simple evaluation of a diamond's cut.

Although there are some disagreements as to the specific percentages that make up the perfect diamond cut, for potential ruby customers, the most important thing to recognize is that diamond qualifications given by organizations like the AGS and GIA are reliable and also purposeful. Reputable ruby suppliers base the costs at which they get and market diamonds on the cut along with the remainder of the "four Cs." When you buy a diamond, you don't need to bother with the perception of what makes an excellent ruby cut transforming a lot that the worth of your ruby will certainly be considerably affected.

Which diamond reduced grade stands for the most effective worth?

Which type of diamond is best for you largely depends upon your budget plan. For purchasers who want to purchase them, vendors normally advise diamonds with the highest feasible cut qualities. Nevertheless, this may be due to some self-involvement on their part.

The other 3 Cs have an influence on diamond rates also, so it can be hard to evaluate the exact difference in rate between a Perfect or Exceptional cut ruby and an Extremely Excellent cut. For casual customers and budget-conscious investors alike, diamonds with a Really Excellent or Excellent cut grade could stand for an outstanding value. This is because, while they could be much more affordable than otherwise equivalent Perfect or Outstanding cut diamonds, the visible difference in quality is minimal.

At the exact same time, really feel totally free to use your discernment. If, for example, you encounter a ruby with a Suitable cut ranking which has excellent ratings in the various other categories as well as is still within your spending plan, after that you ought to absolutely consider it, as long as you're taking care of a respectable vendor.

engagement rings

Just how Do You Know If The Diamond Is Phony Or Real Diamond?

Catharpin

You have been dating the individual of your desires for rather a long time currently. You might or may not be remaining with each other as a pair, either of both has its own relationship issues; if you do not live as a pair, the feeling of loneliness that surges through your heart whenever your companion states the words "good bye" after a charming day well invested with each other motivates you to do more as well as every time you transform wrongly to show to him or her your sensations, the empty area that welcomes you, promptly transforms your motivation to do more into a willpower to do even more currently! For those who have taken their connections an action further by relocating in together.

Because of the loneliness felt each time a partner says excellent bye, different types of stress as well as sensations established in they could be the have to make your love official for the entire globe to see or you both intend to start a stable family members. Whatever motivates you into finally making the very first step to one of the most crucial commitment you would ever make in your entire life might not be off importance however the symbol which you should provide while taking this action is of the utmost importance - "The Interaction Ring".

Today purchasing an involvement ring has currently come to be the standing quo of recognizing on your own as one that is already taken and also all set for marital relationship however have you ever before had fun with the rock or band on your hand as well as considered its history? Because it's not defined in the scriptures or the earliest documents that provide thorough accounts of methods prior to marriage in time passed.

The popular engagement ring of the modern age had its beginning as current as the 19th century as well as had not been constantly an icon of unequaled affection, it was essentially the first component settlement of the bride-to-be cost to be paid to the new bride's household however turned over as well as worn by the new bride. It was a sort of insurance policy offered for the female, in situation the possible partner which was constantly the male at that time dissolves the marriage consequently jeopardizing the woman's virtue and attract various other men.

The real meaning and sign of the engagement ring started beaming with in the 20th century, when guys gave their fiancées a band that signified their love and also intents for a marital relationship union, the interaction ring represented that she had been taken, from restrictions as well as all set to be wed to her true love as well as it was positioned on the fourth finger of the left hand, for that finger was believed to have a vein going through it which came straight from the heart therefore symbolizing the finger as a "heart finger". Earlier rings can just be a piece of silver or an iron band without any accessory, which the female inserts right into her fourth finger on her left hand, this was the method momentarily till business rings and also the media took over the involvement scene. The Adverts revealed on engagement rings in the middle of the 19th century recommended that males ought to invest no less than 2 months of their month-to-month earnings to purchase the ideal ring for his precious bride to be and also just with an advert the meaning and design of the engagement ring took a new direction. The modern-day involvement ring is a sign that reveals that an individual is involved to be married with design. The cut, pricing and construct from the engagement ring although not all important, includes a particular flavour to your engagement day or event as well as has actually rejected a brand-new jewellery market all on its own. The Interaction ring now is available in various layouts; maybe a band constructed from valuable products such as Gold, Platinum or Silver or maybe a band tied with gem rocks to offer a tempting beauty to the ring. The various significant styles of interaction rings will be reviewed listed below.

Different Sorts Of Involvement Rings

Jewelry rings; these are the ultimate traditional involvement rings, the jewelry ring includes a band and a gem stone; the band can be made from any kind of product of your selection ranging from gold to platinum while the gemstone should also be decided to fit your strange characteristics, it can be diamonds or sapphire cut in different methods that would certainly be clarified below.

Engagement Rings with Side stones: These charming rings are made with gems placed right into the sides of the band, which could be constructed from any type of steel product depending upon your taste. Some side stones call likewise come with a central rock at the middle. The prominent gems made use of for this style of rings are normally diamonds but you can personally personalize your gemstone to the preference of your love.

The Three Rock Bands or the Trinity ring: this is a ring layout with its own romantic history, it is believed that each stone in the three stone ring represents the past, existing as well as future of the time where a pair has invested together and the ring would certainly bind them with each other for all endless time. The ring layout is that of a spotless platinum band with three elegant gemstones; one at the middle with 2 place strategically by the sides. The gems are generally crazy of diamonds yet you are allowed to customize your own into 3 different kinds of gems if you so desire.

The Matching Wedding Set: this is an attractive combination of both the interaction ring and the real wedding event band, there is no set layout on how a matching wedding collection ought to resemble but it is normally great to have either the interaction ring or the wedding event ring emphasizing the other as well as the other way around I.e. a charming platinum engagement ring with a gems should be coupled with a basic Gold classic wedding band, supplying the bride-to-be with a touch of colour. Tension Rings: allow the name not function as an obstacle to you when thinking about the stress ring for it is among those designs we call easy but indefinitely elegant, it includes a band made from any kind of product of your option, securely holding a gemstone in its grip with stress i.e. the gems is not held by prongs however gripped between both sides of the band product you picked. The band material works as its holding support. It is very advised you opt for two contrasting colours for the band as well as the gemstone to bring out real beauty of the stress ring.

The Various Cuts of Gemstones

The Pillow cut: this approach of reducing a gemstone, offers the stone a traditional shape that is in between a rectangular shape and also an oval, it is just one of the most popular jewelry cuts and it's additionally referred to as the antique cut.

The Marquise cut: the method utilized in reducing the shape of the marquise cut provides the gemstone an oval form between with ends. This ring has a timeless elven or should I state natural look that draws out the mythological elegance in your new bride.

The Emerald cut: the emerald gem normally has its own defined shape and this cut technique clearly mirrors it, the emerald cut is a rectangle-shaped cut with chopped edges protruding at its 4 ends.

The Asscher cut: this technique of cutting the gemstone offers it a shape people say resembles the emerald rectangular shape yet it is more octagonal in form compared to rectangle, the octagonal shape helps it catch light and mirror it in different directions. It's a flawlessly stunning cut for a rings gemstone.

The Princess cut: this is just one of the most previously owned cuts on gemstones, it is square fit and assists bring out the appeal of the gems made use of fairly demurely. The Round cut: this cut basic looks round but its more compared to that for it has different spikes included to its surface areas making it among, if not the most shining gemstone cut of the whole lot, it is known among ladies for its capability to blind the eye (glimmer).

The Heart cut: perfect for the romantics at heart as well as shaped to stomach their hearts, it is a straightforward and also stylish cut that is rather preferred amongst ladies. After providing a basic expose on interaction ring layouts as well as cuts, the next action is to offer your notice the leaders in the market that provides you with the ideal as well as most pricey rings- in many cases- available.

Bill Barnes: the producers of several of the most beautiful as well as costly interaction bands available. Tiffany: everyone understands the name Tiffany this designer house also offers clients with top of the range rings and costs defer. Tacori: the Tacori style is likewise one of one of the most sought after engagement rings in the jewelry industry the cut and setup of its designs are always a delight to look at.

In selecting a ring your spending plan need to likewise come right into play so either you buy Tiffany's or a typical involvement ring, it's the idea that counts.

___________________________________________

Rose Gold Diamond Necklace in Virginia

1 Ct Princess Cut Diamond Earrings in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

rose gold morganite halo engagement ring

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

There are a number of designs of interaction rings of 2018 that are incredibly trendy. Whatever from lead ruby rings and tinted rocks to "eco-friendly" rings as well as network established ruby rings came to be preferred in 2018.

Lead diamond rings are rings with three or 4 rows of little, even-sized diamonds that generally go around the entire ring. A bigger center rock set above the remainder of the ring finishes the appearance. Pave diamond involvement rings are among the most effective involvement rings of 2018 because they are a sophisticated choice for an involvement ring while producing a great deal of sparkle on a soon-to-be bride-to-be's third finger. You'll additionally discover lead ruby wedding celebration bands that match your interaction ring and also make it a lot more sparkly.

Colored stones have actually additionally grown in popularity. Because of this, rings with tinted diamonds are among the best involvement rings of 2018. Diamonds come in a variety of colors, including yellow, blue, pink, or even black. True colored diamonds are very rare, makings them extremely pricey. A one-carat colored ruby can run upwards of ten thousand dollars. However, if you can not manage to spend this much loan on an involvement ring, there are a pair of alternatives that will still allow you to be fashionable with a tinted rock. With the most recent innovation, you can purchase a synthetic tinted diamond. With the developments that have been made, the majority of people can not tell the distinction between a mined ruby and also a manufactured one. If you get or commission a manufactured diamond, you can select whichever color you like, and conserve a number of thousands of dollars in the meantime. Conversely, if you want a tinted rock however do not need a ruby, emeralds, sapphires, and also rubies make wonderful options for involvement rings and are far much less pricey than mined colored diamonds.

Environment-friendly involvement rings are also among the very best interaction rings of 2018. With even more people concerned regarding the setting and also concerning the civils rights concerns that border standard diamond mining, more individuals are seeking options to standard involvement rings. One possibility is to get an engagement ring that has a diamond that was mined in Canada as opposed to South Africa. Canada does not have the exact same human civil liberties issues focusing on its diamond market, so it's considered to be extra friendly to the world. Alternatively, buying a manufactured diamond ring is additionally considered to be much more "eco-friendly" because not only does it not have the same human rights issues that mined diamonds do, yet it doesn't damage the earth like mining for diamonds has a tendency to do. Alternatively, the very best engagement rings of 2018 consist of antique engagement rings because the greenest interaction rings are those that are recycled and also recycled. By getting an interaction ring that is antique, you are not adding to the new diamond ring market or the damage of the environment.

Channel set ruby rings are likewise on the checklist of ideal involvement rings of 2018. Channel set involvement rings have actually the rocks established within the band of the ring, so the top of the rock is despite the top of the ring. Network established rings are particularly optimal due to the fact that the diamonds are secured from being damaged since you can not reach the rock to chip them. Much more popular are network set ruby rings constructed out of platinum, which has actually just recently grown in popularity. If you wish to get a ring that is also more one-of-a-kind, though, you can have a channel set involvement ring established with rocks apart from diamonds. Sapphires are a particularly popular selection for involvement rings.

3 stone halo engagement ring

Exactly how Do You Know If The Ruby Is Fake Or Actual Diamond?

Catharpin

Rubies are normally offered in a really wide variety of colors. The majority of people learn about anemic rubies and also GIA's color grading system that is utilized to classify a diamond's body color ... you recognize D, E, F, and so on. This color grading system is only utilized to categorize the most common ruby body color of yellow nonetheless anytime a ruby is discovered in one more shade like pink, blue, green, and so on; then this ruby is described as a "" elegant ruby"".

All-natural Fancy rubies could be extremely costly and lot of times a lot more expensive than a comparable dimension colorless ruby. A very good instance of a Fancy ruby is the infamous 45.52 carat elegant deep blue diamond, the Hope Ruby, which is on display screen in the Smithsonian Natural Background Museum in Washington, DC.

A color boosted diamond is a 100% all-natural ruby that has actually had its shade altered. And also most importantly, color enhanced diamonds can be found in a really wide selection of shades at very budget-friendly rates!

A little bit of history- For several, years it has been well known that a ruby's color could be "" improved"" by placing a little tinted material externally of a ruby as well as much like magic ... a diamond that had a noticeable yellowish color would change to a much more appealing near anemic ruby. Unfortunately, this sort of shade improved ruby could transform back to its initial body shade if this tinted material was unintentionally gotten rid of. In more current years, the technology of color enhanced diamonds has gone extremely advanced. It is now feasible to entirely transform the color of a ruby! These processes are thought about long-term because it does stay steady when revealed to day-to-day regular problems. The shade will not fade if subjected to sunlight or be cleaned off by harsh chemicals.

Exactly how is it done? The preferred outcome of any one of these treatments is to have a much more valuable ruby. A much less marketable diamond would certainly be a ruby that has a low body shade or often a lower quality. The shade improved ruby therapy business recognize if they start off with a certain sort of ruby and process it for a specific quantity of time that they need to wind up with a specific color yet it does not constantly work by doing this. This is a scientific research that does need some art in their procedures ... the only procedure that gives consistent results is the coating procedure.

The three processes are as complies with- Refine # 1- HPHT Shade Boosted Diamonds- High Pressure/ High Temperature (HPHT) treatment could boost the color of certain types of brown diamonds and thus enhance their value. General Electric has actually created a procedure that practically is a mechanical simulation of a ruby's production in nature. The color improved ruby will be warmed up to a really high temperature level under a really high, supported stress. Faults in the crystal structure are then reorganized causing an alteration of the ruby's shade. Due to the fact that the conditions of HPHT are really just like diamond's original development, only a well outfitted laboratory will be able to favorably recognize this kind of shade improved ruby. HPHT wased initially utilized to turn yellowish diamonds right into even more valuable fancy tinted enhanced rubies, today it is also made use of to change some unpopular brown diamonds into even more preferable colorless colored enhanced rubies.

Process # 2- Irradiated Color Enhanced Diamonds- OK ... do not start obtaining all delighted due to the fact that you saw the word irradiated! This is a 100% safe procedure that is very much like exactly what is used to protect food by revealing it to a stream of Gamma rays. The color enhanced ruby process is done in numerous various means but the outcomes are just the same. You start with a low shade (P, Q, R, etc.) 100% all-natural ruby that has currently been cut as well as brightened, then it is revealed to a stream of quick electrons. During this part of the process the ruby will certainly look to an extremely dark shade because some of the atoms in the diamond's crystal framework have currently been dislocated and this in turn has actually impacted the method light travel through the ruby. Next the diamond experiences a regulated home heating (annealing) process, this allows several of those atoms to transfer (partially fixed) in order to acquire a preferred shade.

Refine # 3- Covered Color Boosted Diamonds- The layer on sleek diamonds describes a thin artificial layer that modifies the color of the ruby. The coating could either be of the wanted shade or can create a colored interference-effect. Sadly occasionally this procedure is done to deceive a buyer. It is a relatively easy process to carry out, it has been around for years (although the coatings materials are far better currently), and also it does not need a great deal of expensive high technology equipment. Just recently, I've seen some pink covered rubies on the market, they are very appealing ... and also obviously you would certainly need to buy them recognizing that they have been covered and follow your jewelry expert's standards about possessing as well as taking care of these color boosted diamonds. The covering can be used to the entire of a diamond's surface, just the bottom of the ruby, or to a narrow zone near the girdle. A well-applied layer could change the color by several shade grade. Some finishes can be eliminated via boiling in acid, solid cleansing services, or perhaps household chemicals. Sometimes dots or larger areas of purple or blue ink are repainted on the diamond in order to help neutralize a yellowish color. The ruby's setting will usually cover the dots, so they are hard to see in an installed rock.

So, is a shade improved diamond right for you? Maybe ... natural expensive color diamonds could be stunning however they are pricey! Shade boosted rubies are budget friendly and enable several individuals to own a brightly colored diamond. Ask your local jeweler if they have any kind of Fancy rubies ... either natural or color boosted rubies. It is constantly intriguing, and fun, to check out something different!

Under normal wear the irradiated and also HPHT shade improved rubies will have not a problem of the shade fading away. The only consideration will be when you should have any kind of kind of solution done on the item of fashion jewelry. If this kind of color boosted diamond is exposed to extreme quantities of warmth it may affect the shade. The jewelry expert will should know that the diamond is a shade boosted ruby before any kind of work is done and after that the jewelry expert will be able to decide on the most effective course of action. Shade improved rubies are now additionally used as the small accent diamonds around a larger colorless diamond. There are many exciting items of fashion jewelry available with little blue, yellow, black, or eco-friendly color boosted diamonds.

Since you understand about color enhanced rubies and somebody aims to offer you on exactly what they call an all-natural elegant tinted ruby yet it goes to a very deal price ... you will certainly recognize that something simply does not seem appropriate regarding the offer. A report from a highly regarded grading lab must come with 100% natural Fancy tinted diamonds that are marketed as all-natural. If you deal with a trustworthy firm and you have actually been guaranteed regarding what you are acquiring, after that you will certainly decrease the opportunity of something bad occurring to you. As with any type of circumstance entailing a pricey purchase of something that few people are well versed in, education and learning should be an important part of your plan. This is much more essential if you prepare to buy a shade improved diamond. Bud Boland has actually been in the fashion jewelry business for 40 years and also has done whatever from watchmaking, ruby setting, precious jewelry making, and has been a Jeweler for nearly 35 years. He is a Grad Gemologist from GIA (Gemological Institute of The U.S.A.), which is also the location where he was an Instructor. He has actually educated concerning rubies to numerous pupils from around the globe

___________________________________________

Rose Gold Diamond Necklace in Virginia

Male Engagement Rings in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

diamond rings

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

rose gold morganite halo engagement ring

Just how Do You Know If The Diamond Is Phony Or Actual Ruby?

Catharpin

To start our feature on different sorts of gemstones, we will start with the best and also most popular gemstone of them all the diamond. The diamond is the utmost gems. It has few weak points as well as lots of strengths. It glows with its extraordinary value and also sentimental worth. It is utilized in wedding rings to represent limitless love or utilized as gifts/jewelry to be provided to liked ones. But the ruby is a lot more than its everlasting charm.

The ruby acquires its name from the Greek job adamas suggesting unbeatable. In firmness, there is no comparison. The diamond prices in the Mohs range a 10 which is the hardest material in the world. Its cutting resistance is 140 times that of the ruby and also sapphire, the gems(Corundum) that are next in the Mohs scale in solidity. The diamond's optical residential or commercial properties such as luster and also rigidness make it unique and conveniently differentiated from other replicas. Enjoy!

* History of Diamonds

The initial tape-recorded ruby go back around 800 B.C. in India. Some believe it even dated back 6,000 years back. The diamonds were used as ornamental objectives as well as as amulets to prevent wicked as well as offer protection in fight. During the Dark Ages, diamonds were also specified to be utilized as a clinical aid. Spiritual medical professionals also informed people that if they hold a ruby in a hand and make the indication of the cross would, it would cure as well as disease as well as heal wounds.

Diamonds ended up being extra prominent during the 19th century as a result of exploration of ruby down payments in South Africa. This exploration results in boosted supply, enhanced reducing as well as polishing methods, and development in economic situation. In 1979, rock hounds found the Argyle pipe in Australia which to this date is the richest ruby down payment worldwide. Argyle, ever since, alone is in charge of supplying over one third of the world's diamonds yearly.

* Diamonds: Just how are they formed?

Rubies includes an allotrope of carbons that are developed in high-pressure, high-temperature problems. Rubies are created 90 miles under the Earth's surface area at temperature levels of concerning 2200 levels Fahrenheit. Diamonds are developed deep within the earth and ultimately, over very long periods of time, press their means to the earth's surface area, generally through volcanic eruptions.

The age of these rubies from underneath the surface of the planet are from 1 to 3.3 billion years of ages! When diamonds are created as well as start their climb to the planet's surface area, they go through channels where the lava from the volcano climbs to the surface, choosing up rubies in the process as well as ultimately depositing them on the surface, where they are eventually found as well as extracted.

* The 4 C's of Diamonds

There are 4 distinctive characteristics that establish the value and high quality of a diamond. These are the shade, cut, clarity and carat. Otherwise understood as the 4 C's of a ruby. In the adhering to, we will talk regarding these features carefully.

* Color

In the last e-newsletter, we touch based on the shade of gemstones as being the most crucial feature as a result of the reality that color is one of the most apparent attribute. The excellent ruby needs to show up clear as well as colorless yet this is not the case for all rubies. Diamonds can can be found in any color of the rainbow most common shade is a shade of yellow or brownish. The Geological Institute of America(GIA) have created a standard to quality ruby color. This guideline contains a lettering system that varies from the alphabet D - Z. Please see below:

D E F No Shade G H I J Virtually Colorless K L M Faintly colored, cannot barely be seen as well as normally yellow in color N O P Q R Lightly tinted, normally yellow. Can be seen with the nude eye S T U V W X Y Z Tinted, begins from yellow as well as advances to brown

* Quality

The cut a diamond is identified by the ruby's percentage such as its shape, width and also depth. The cut determines what is called the ruby's "sparkle". Even if the ruby itself has excellent shade and also clarity, with a poor cut the ruby will have a dull radiance. This is due to the fact that the cut establishes how light travels within the diamond. The Gemological Institute of The U.S.A. has actually likewise devised a clearness grading system to rate ruby clearness. This grading system includes Perfect (Fl), Inside Flawless (IF), Very Really Somewhat Included (VV1 or VV2), Really Somewhat Included(VS1 or VS2), A Little Consisted Of(SI1 or SI2), and Consisted Of(I1, I2, and also I3). Although this system had actually been added to the diamond sector, it is not commonly utilized. This results from the truth that it took a whole lot of method and training to integrate it.

* Cut

The cut a diamond is established by the diamond's percentage such as its shape, size and deepness. The cut determines what is called the diamond's "brilliance". Even if the diamond itself has ideal color and quality, with a bad cut the ruby will have a plain radiance. This is because the cut figures out just how light trips within the diamond.

There are 3 sorts of cuts that can determine the diamond's sparkle. These are a shallow cut, a cut that is unfathomable and also suitable cut. A superficial cut is a cut of a ruby that is also reduced, that light traveling with it is lost under of the stone and does not return right into sight. This cut makes a ruby show up drab and plain. A cut that is unfathomable is a cut that is also high, that light taking a trip through it leaves via the sides and darkens the stone. An ideal cut is an excellent cut on a diamond that reflects light to the top of the rock, giving it ideal luster.

* Carat

As mentioned on the last newsletter, a solitary carat weight(ct) weighs about 200 milligrams or.2 grams. For smaller carat diamonds that evaluate much less than a carat weight, it is expressed as factors (pt). Points are 1/100 of a carat. Carat weight of a ruby is vital as a result of that larger diamonds are rarer than smaller ones, so primarily the larger the ruby the a lot more expensive it is. There is no basic grading system or diagram that could reveal different carat weight. This is since there are so many variants of diamonds in shape and cut, makings stones of similar weight, look different.

* Imitation Diamonds

Since rubies are the most important and also rarest of all the gemstones, initiatives have actually been made to replicate and even boost rubies making use of much less costly alternatives. A lot of times, truthful blunders have been made and also these options or other gemstones such as spinel were sometimes confused with actual diamonds. Sometimes, some unethical people attempt to market these alternatives to misfortunate customers in order to revenue. Below we will certainly review concerning these alternatives and also means to recognize them.

* Artificial Diamonds

Artificial diamonds are rubies that are expanded manufactured in a research laboratory. The initial recognized situations of ruby synthesis were claimed to be recorded in between 1879 - 1928, yet this was never ever confirmed. It wasn't until the 1940's where research study started in the USA, Sweden, Soviet Union started investigating. Synthetic diamonds are otherwise called High Stress Heat (HPHT) rubies or Chemical Vapor Down Payment (CVD) diamonds. The name of both these artificial diamonds originates from the procedures utilized to develop them. A few of these synthetic rubies might either have greater, lesser or similar qualities compared to that of a diamond. For that reason, these artificial diamonds are utilized for abrasives, cutting and also brightening devices, as well as switches over in power plant.

* Simulants

Simulants are non-diamond materials that are made use of to reproduce the look as well as the form of a diamond. One of the most fundamental as well as well recognized simulant is cubic zirconia (CZ). CZ at plain sight could shimmer even more than a ruby and it is less dense, implying that a 1 carat weight CZ will certainly be a lot larger than a 1 carat diamond. Nowadays, a more prominent simulant is moissanite, which has just the same features of a ruby. These qualities include firmness (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 and also ruby -2.42) and also diffusion (Moissanite -.104 and diamond -.044). This makes it tough to set apart the two at plain view and would certainly commonly need testers to inform the distinction. In the following section we will certainly go over how to identify moissanites as well as other replicas.

* Actual or Fake?

An old technique of recognizing diamonds is to do a scrape test. This calls for scraping a diamond with one more ruby which is destructive as well as is seldom utilized nowadays. The very best and also most trustworthy means to evaluate for rubies is to make use of testers that make use of thermal conductivity. These testers contain battery powered thermistors installed with a retractable copper idea. This tester functions by injecting the warmth into the checked rock and also then the gadget gauges the quantity of warm that it performs. Nevertheless thermal conductivity testers works best to distinguish diamonds and also its other simulants, it will not help differentiate lab developed or artificial rocks. To be able to determine these, particular optical strategies are needed. Laboratories make use of methods such as spectroscopy, microscopy and also luminescence in order to identify a particular stones beginning. The average person can use loupes as well as microscopes to distinguish synthetic rocks. All-natural diamonds usually have small blemishes and imperfections such as additions or some kind of international material, which will not be located in synthetics.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Pear Engagement Rings in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

white gold princess cut diamond ring

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To begin our function on various sorts of gems, we will certainly begin with the very best and most well known gemstone of them all the ruby. The ruby is the utmost gems. It has few weaknesses as well as lots of staminas. It shines with its extraordinary worth as well as emotional value. It is used in wedding rings to stand for countless love or made use of as gifts/jewelry to be provided to liked ones. However the ruby is so a lot more than its eternal appeal.

The ruby acquires its name from the Greek work adamas indicating unbeatable. In hardness, there is no comparison. The ruby prices in the Mohs scale a 10 which is the hardest material in the world. Its cutting resistance is 140 times that of the ruby as well as sapphire, the gemstones(Corundum) that are following in the Mohs range in hardness. The ruby's optical homes such as appeal and rigidness make it distinct and also conveniently differentiated from various other imitations. Delight in!

* History of Diamonds

The initial recorded diamond go back around 800 B.C. in India. Some believe it even dated back 6,000 years earlier. The diamonds were utilized as attractive functions and as amulets to fend off bad as well as give protection in battle. During the Dark Ages, diamonds were also mentioned to be used as a clinical help. Religious doctors even informed clients that if they hold a diamond in a hand and also make the indication of the cross would certainly, it would certainly heal and also disease and also recover injuries.

Rubies came to be much more preferred throughout the 19th century as a result of discovery of diamond deposits in South Africa. This discovery causes enhanced supply, improved reducing as well as brightening techniques, as well as growth in economic climate. In 1979, geologists discovered the Argyle pipeline in Australia which to this day is the richest diamond down payment in the globe. Argyle, ever since, alone is liable for supplying over one third of the world's diamonds annually.

* Diamonds: Just how are they developed?

Rubies includes an allotrope of carbons that are formed in high-pressure, high-temperature problems. Diamonds are created 90 miles under the Earth's surface at temperature levels of about 2200 levels Fahrenheit. Diamonds are developed deep within the planet and also at some point, over exceptionally lengthy durations of time, press their way to the earth's surface, usually via volcanic eruptions.

The age of these rubies from under the surface of the earth are from 1 to 3.3 billion years of ages! When rubies are developed and start their climb to the planet's surface area, they undergo channels where the lava from the volcano rises to the surface area, choosing up rubies along the way and eventually depositing them on the surface area, where they are at some point discovered as well as extracted.

* The 4 C's of Diamonds

There are four distinct features that establish the value and also top quality of a diamond. These are the shade, cut, clearness and carat. Otherwise understood as the 4 C's of a diamond. In the adhering to, we will certainly speak about these attributes carefully.

* Color

In the last newsletter, we touch based on the color of gemstones as being one of the most vital feature because of the truth that shade is the most evident function. The perfect ruby must appear clear and also anemic but this is not the case for all diamonds. Rubies can come in any color of the rainbow most usual color is a color of yellow or brown. The Geological Institute of America(GIA) have actually designed a standard to grade diamond shade. This standard includes a lettering system that ranges from the alphabet D - Z. Please see listed below:

D E F No Shade G H I J Virtually Anemic K L M Faintly tinted, can't hardly be seen and normally yellow in color N O P Q R Gently tinted, usually yellow. Could be seen with the nude eye S T U V W X Y Z Tinted, begins with yellow as well as proceeds to brown

* Clearness

The cut a diamond is identified by the diamond's proportion such as its shape, size as well as depth. The cut establishes just what is called the ruby's "sparkle". Also if the diamond itself has excellent shade as well as clarity, with an inadequate cut the ruby will have a dull radiance. This is since the cut determines just how light journeys within the diamond. The Gemological Institute of America has additionally created a clarity grading system to place ruby clearness. This grading system consists of Flawless (Fl), Internally Perfect (IF), Very Really Somewhat Consisted Of (VV1 or VV2), Extremely Somewhat Included(VS1 or VS2), A Little Included(SI1 or SI2), and Consisted Of(I1, I2, as well as I3). Although this system had been added to the ruby industry, it is not commonly used. This results from the truth that it took a lot of technique and also training to integrate it.

* Cut

The cut a ruby is determined by the diamond's proportion such as its shape, width as well as depth. The cut establishes what is called the ruby's "luster". Also if the diamond itself has perfect shade and clarity, with a poor cut the diamond will have a boring radiance. This is due to the fact that the cut determines just how light journeys within the ruby.

There are 3 kinds of cuts that could figure out the ruby's radiance. These are a shallow cut, a cut that is unfathomable and also ideal cut. A superficial cut is a cut of a diamond that is also reduced, that light taking a trip via it is lost on the base of the rock as well as does not come back right into view. This cut makes a ruby appear lifeless and boring. A cut that is unfathomable is a cut that is also high, that light traveling through it runs away through the sides and also darkens the rock. An excellent cut is an ideal cut on a ruby that reflects light to the top of the stone, providing it excellent radiance.

* Carat

As stated on the last newsletter, a single carat weight(ct) considers concerning 200 milligrams or.2 grams. For smaller sized carat weight rubies that consider less compared to a carat, it is shared as factors (pt). Points are 1/100 of a carat. Carat weight of a diamond is necessary as a result of the truth that bigger diamonds are rarer than smaller sized ones, so primarily the bigger the ruby the more expensive it is. There is no conventional grading system or diagram that could reveal various carat weight. This is since there are many variants of rubies in form and also cut, which makes rocks of similar weight, look different.

* Imitation Diamonds

Given that diamonds are the most important and rarest of all the gems, efforts have been made to duplicate or even improve rubies using more economical options. A lot of times, straightforward errors have actually been made and also these options or various other gems such as spinel were occasionally perplexed with real rubies. In some cases, some deceitful individuals attempt to offer these options to misfortunate buyers in order to earnings. Below we will review concerning these choices as well as means to identify them.

* Synthetic Diamonds

Synthetic rubies are diamonds that are grown made in a research laboratory. The initial well-known situations of diamond synthesis were asserted to be documented in between 1879 - 1928, yet this was never ever confirmed. It had not been till the 1940's where research started in the USA, Sweden, Soviet Union started investigating. Synthetic diamonds are or else called High Pressure Heat (HPHT) diamonds or Chemical Vapor Down Payment (CVD) rubies. The name of both these synthetic rubies stems from the procedures made use of to develop them. Some of these artificial rubies could either have higher, lower or comparable characteristics than that of a diamond. Consequently, these artificial rubies are made use of for abrasives, reducing and also polishing tools, and switches over in power plant.

* Simulants

Simulants are non-diamond materials that are used to reproduce the look or even the shape of a ruby. The most fundamental and well known simulant is cubic zirconia (CZ). CZ at plain view could glimmer even more compared to a ruby and additionally it is much less dense, meaning that a 1 carat CZ will certainly be a lot larger than a 1 carat weight diamond. Nowadays, an extra prominent simulant is moissanite, which has all the same characteristics of a ruby. These attributes consist of firmness (Moissanite-9.25 and diamond-10 in Mohs scale), refractive index(Moissanite -2.65 as well as diamond -2.42) and dispersion (Moissanite -.104 and ruby -.044). This makes it hard to set apart both at simple view as well as would commonly need testers to inform the difference. In the next section we will review how to recognize moissanites and various other imitations.

* Actual or Fake?

An old technique of recognizing rubies is to do a scratch test. This calls for damaging a diamond with an additional diamond which is damaging and is hardly ever made use of nowadays. The most effective and also most reliable means to test for rubies is to make use of testers that use thermal conductivity. These testers consist of battery powered thermistors placed with a retracting copper pointer. This tester functions by injecting the warmth onto the evaluated rock and afterwards the tool gauges the amount of warm that it performs. Nonetheless thermal conductivity testers works best to distinguish diamonds as well as its various other simulants, it will not assist identify laboratory produced or synthetic stones. To be able to recognize these, certain optical strategies are needed. Laboratories utilize methods such as spectroscopy, microscopy and luminescence in order to determine a particular rocks origin. The average person could use loupes as well as microscopic lens to distinguish synthetic stones. Natural rubies generally have minor blemishes and imperfections such as inclusions or some kind of international product, which will not be found in synthetics.

princess cut wedding rings

Just How to Purchase Diamonds When Getting Wholesale.

Catharpin

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia