Rose Gold Diamond in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

three diamond ring

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

You have actually been dating the individual of your dreams for rather a long time now. You could or may not be staying with each other as a pair, either of both has its very own connection problems; if you do not live as a couple, the feeling of isolation that rises through your heart each time your partner states the words "excellent bye" after a beautiful day well invested with each other influences you to do even more and also every time you turn erroneously to share with him or her your sensations, the vacant area that greets you, quickly transforms your inspiration to do even more right into a resolve to do more currently! For those who have taken their connections a step additionally by relocating with each other.

As a result of the loneliness felt each time a partner says good bye, different kinds of stress and sensations embeded in they could be the need to make your love authorities for the entire world to see or you both intend to begin a secure family. Whatever inspires you right into lastly making the very first step to the most crucial commitment you would ever before make in your whole life might not be off value yet the icon which you need to provide while taking this action is of miraculous significance - "The Involvement Ring".

Today buying an engagement ring has currently end up being the standing quo of recognizing yourself as one who is currently taken and also prepared for marital relationship yet have you ever had fun with the rock or band on your hand and also thought of its history? Since it's not defined in the bible or the oldest records that offer in-depth accounts of techniques before marriage in time passed.

The prominent engagement ring of the modern-day age had its beginning as recent as the 19th century as well as had not been constantly a sign of undying affection, it was essentially the first component payment of the bride price to be paid to the bride-to-be's family members however handed over and also worn by the bride. It was a sort of insurance attended to the lady, in case the possible partner which was constantly the guy at that time disbands the marriage therefore jeopardizing the female's virtue as well as interest other males.

Real meaning and also sign of the engagement ring started shining with in the 20th century, when men gave their fiancées a band that represented their love and also purposes for a marital relationship union, the engagement ring indicated that she had actually been taken, from limitations and also prepared to be wed to her true love and it was put on the fourth finger of the left hand, for that finger was thought to have a vein running with it which came directly from the heart for that reason representing the finger as a "heart finger". Earlier rings could simply be an item of silver or an iron band with no adornment, which the lady inserts into her 4th finger on her left hand, this was the practice for a brief time till business rings as well as the media took control of the involvement scene. The Adverts revealed on involvement rings in the center of the 19th century recommended that men need to spend no much less than 2 months of their month-to-month earnings to purchase the best ring for his valuable bride to be and also simply with an advert the definition and also design of the involvement ring took a new instructions. The modern-day involvement ring is an icon that shows that a person is engaged to be married with style. The cut, prices as well as make from the interaction ring although not all vital, adds a particular flavour to your involvement day or ceremony and has actually rejected a new jewellery market all on its very own. The Involvement ring currently is available in various styles; it can be a band made of precious products such as Gold, Platinum or Silver or it could be a band laced with gem stones to provide an irresistible beauty to the ring. The different significant layouts of interaction rings shall be discussed listed below.

Various Kinds of Involvement Rings

Jewelry rings; these are the perfect timeless engagement rings, the jewelry ring consists of a band and also a treasure stone; the band might be made from any kind of product of your selection ranging from gold to platinum while the gemstone must also be chosen to fit your peculiar qualities, maybe diamonds or sapphire cut in various manner ins which would certainly be explained listed below.

Interaction Rings with Side rocks: These charming rings are made with gems inserted right into the sides of the band, which could be constructed from any kind of steel product relying on your preference. Some side rocks sound likewise had a main rock at the middle. The popular gemstones used for this layout of rings are typically diamonds but you can directly personalize your gemstone to the preference of your love.

The Three Rock Bands or the Trinity ring: this is a ring style with its own romantic history, it is thought that each stone in the three rock ring symbolizes the past, present and also future of the moment in which a pair has invested with each other and also the ring would bind them with each other for all eternity. The ring design is that of an immaculate platinum band with three exquisite gemstones; one at the center with two place purposefully by the sides. The gems are normally crazy of diamonds yet you are enabled to personalize yours into three different sorts of gemstones if you so desire.

The Matching Wedding Set: this is a stunning combination of both the interaction ring and also the actual wedding event band, there is no collection design on exactly how a matching bridal collection ought to look like yet it is usually excellent to have either the interaction ring or the wedding celebration ring highlighting the other as well as vice versa I.e. an elegant platinum engagement ring with a gemstone must be coupled with an easy Gold timeless wedding event band, giving the new bride with a touch of colour. Stress Rings: allow the name not act as an obstacle to you when taking into consideration the stress ring for it is among those styles we call basic however indefinitely elegant, it includes a band made from any kind of product of your selection, tightly holding a gemstone in its grip with stress i.e. the gems is not held by prongs however squeezed between both sides of the band material you picked. The band product acts as its holding support. It is highly suggested you go for two contrasting colours for the band as well as the gems to highlight the real elegance of the tension ring.

The Different Cuts of Gemstones

The Pillow cut: this method of cutting a gems, gives the stone a traditional shape that is between a rectangle and also an oval, it is one of one of the most prominent jewellery cuts as well as it's likewise referred to as the antique cut.

The Marquise cut: the technique used in cutting the shape of the marquise cut offers the gems an oval form between with ends. This ring has a classic elven or need to I say earthy look that brings out the supernatural elegance in your bride.

The Emerald cut: the emerald gem normally has its very own defined form and also this cut approach clearly mirrors it, the emerald cut is a rectangle-shaped cut with cropped edges sticking out at its 4 ends.

The Asscher cut: this method of reducing the gems offers it a form people say is similar to the emerald rectangle however it is more octagonal in form than rectangular shape, the octagonal shape helps it catch light and also mirror it in different instructions. It's a perfectly gorgeous cut for a rings gems.

The Princess cut: this is just one of one of the most used cuts on gems, it is square fit as well as aids highlight the beauty of the gemstone utilized quite demurely. The Round cut: this cut general looks round however its more than that for it has various spikes contributed to its surface areas making it one of, if not one of the most radiating gemstone cut of the lot, it is understood among ladies for its ability to blind the eye (sparkle).

The Heart cut: perfect for the romantics in mind and shaped to stubborn belly their hearts, it is a straightforward and also elegant cut that is fairly prominent amongst women. After giving a general subject on involvement ring layouts and also cuts, the following action is to bring to your notice the leaders in the industry that provides you with the very best as well as most costly rings- in some situations- available.

Expense Barnes: the manufacturers of some of the most exquisite and pricey involvement bands out there. Tiffany: everyone recognizes the name Tiffany this designer house also supplies customers with top of the variety rings as well as costs defer. Tacori: the Tacori style is additionally one of one of the most demanded interaction rings in the jewelry sector the cut as well as setup of its layouts are constantly a happiness to witness.

In selecting a ring your budget plan have to likewise enter play so either you purchase Tiffany's or an average involvement ring, it's the thought that counts.

10 ct ring

Start With the Basics When Intrigued in Buying Diamond Fashion Jewelry.

University Place

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Vintage Wedding Rings in Washington

Rose Gold Engagement Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

channel set diamonds

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Diamonds are naturally available in a very broad variety of colors. A lot of individuals understand about colorless diamonds and GIA's shade grading system that is utilized to classify a ruby's body color ... you know D, E, F, and so on. This color grading system is only made use of to categorize the most common ruby body color of yellow nonetheless anytime a ruby is located in an additional shade like pink, blue, green, and so on; then this diamond is described as a "" fancy diamond"".

All-natural Fancy rubies could be really expensive and also several times a lot more pricey compared to a comparable dimension anemic ruby. A very excellent instance of a Fancy ruby is the notorious 45.52 carat expensive deep blue diamond, the Hope Diamond, which is on screen in the Smithsonian Nature Gallery in Washington, DC.

A color enhanced diamond is a 100% natural ruby that has had its shade transformed. And also most importantly, shade improved rubies can be found in an extremely broad selection of colors at extremely inexpensive costs!

A little bit of history- For many, numerous years it has actually been popular that a ruby's color might be "" improved"" by putting a little bit of colored compound externally of a ruby and also simply like magic ... a ruby that had a noticeable yellowish shade would certainly change to a more attractive near colorless ruby. Sadly, this kind of shade improved diamond can transform back to its original body shade if this colored compound was unintentionally removed. In more recent years, the technology of color enhanced rubies has gone exceptionally advanced. It is now feasible to completely change the shade of a diamond! These procedures are thought about irreversible because it does stay stable when subjected to everyday typical problems. The color will certainly not discolor if revealed to sunshine or be washed off by severe chemicals.

Just how is it done? The wanted end result of any one of these treatments is to have a much more marketable ruby. A much less marketable diamond would certainly be a diamond that has a reduced body color or in some cases a reduced clearness. The color enhanced diamond treatment business understand if they start off with a specific kind of diamond as well as process it for a specific quantity of time that they should finish up with a certain color yet it does not always function that means. This is a science that does require some art in their processes ... the only process that gives regular results is the finish process.

The 3 procedures are as complies with- Process # 1- HPHT Shade Boosted Diamonds- High Stress/ High Temperature (HPHT) therapy could boost the color of certain sorts of brownish rubies and thus enhance their value. General Electric has created a process that virtually is a mechanical simulation of a diamond's creation in nature. The color improved diamond will be heated up to a really heat under a really high, maintained stress. Mistakes in the crystal structure are then rearranged causing an alteration of the diamond's color. Since the problems of HPHT are extremely similar to ruby's initial development, just a well geared up lab will certainly have the ability to positively identify this sort of color boosted diamond. HPHT was first made use of to turn yellowish diamonds right into more valuable fancy colored boosted rubies, and now it is likewise made use of to change some out of favor brown rubies into preferred anemic colored boosted rubies.

Refine # 2- Irradiated Color Improved Diamonds- OK ... do not start obtaining all delighted since you saw words irradiated! This is a 100% safe procedure that is very just like exactly what is used to protect food by subjecting it to a stream of Gamma rays. The shade boosted ruby process is done in numerous various methods but the results are all the exact same. You start with a low color (P, Q, R, etc.) 100% all-natural ruby that has already been cut and also polished, then it is subjected to a stream of quick electrons. Throughout this component of the procedure the ruby will certainly look to an extremely dark color due to the fact that several of the atoms in the diamond's crystal framework have actually currently been dislocated and also this subsequently has affected the way light go through the ruby. Next the diamond experiences a controlled home heating (annealing) procedure, this permits some of those atoms to move (partly repaired) in order to acquire a preferred shade.

Refine # 3- Layered Color Boosted Diamonds- The finishing on sleek rubies describes a thin artificial layer that modifies the shade of the ruby. The coating can either be of the wanted shade or can create a colored interference-effect. However often this process is done to trick a customer. It is a fairly simple process to carry out, it has been around for several years (although the finishes products are better now), and it does not need a great deal of costly advanced equipment. Just recently, I have actually seen some pink coated diamonds on the market, they are extremely appealing ... and certainly you would have to buy them understanding that they have actually been coated and also follow your jeweler's standards regarding owning and caring for these color enhanced diamonds. The covering can be related to the whole of a diamond's surface, simply the base of the ruby, or to a narrow zone near the girdle. A well-applied finishing can alter the shade by one or even more color grade. Some finishes can be eliminated via boiling in acid, solid cleaning solutions, and even home chemicals. In some cases dots or bigger locations of purple or blue ink are painted on the ruby to assist combat a yellowish shade. The diamond's setting will usually cover the dots, so they are difficult to see in a mounted stone.

So, is a color boosted diamond right for you? Maybe ... all-natural expensive shade rubies can be lovely however they are pricey! Shade enhanced rubies are cost effective as well as allow many people to own a brilliantly tinted diamond. Ask your neighborhood jewelry expert if they have any type of Fancy rubies ... either natural or shade enhanced diamonds. It is constantly fascinating, and enjoyable, to consider something various!

Under regular wear the irradiated and also HPHT color improved rubies will certainly have not a problem of the color fading away. The only factor to consider will certainly be when you need to have any kind of service done on the piece of jewelry. If this sort of shade enhanced diamond is exposed to too much amounts of heat it could influence the color. The jewelry expert will need to understand that the diamond is a shade boosted diamond before any type of work is done and also after that the jewelry expert will be able to select the ideal strategy. Shade enhanced rubies are now additionally used as the small accent diamonds around a bigger anemic ruby. There are lots of exciting pieces of jewelry available with small blue, yellow, black, or environment-friendly color improved diamonds.

Currently that you find out about shade boosted rubies and someone attempts to offer you on exactly what they call an all-natural fancy tinted ruby however it is at a super deal rate ... you will certainly recognize that something simply does not seem right regarding the deal. A record from a respected grading laboratory must accompany all all-natural Fancy colored rubies that are marketed as all-natural. If you handle a credible business as well as you have actually been assured about just what you are buying, after that you will lessen the opportunity of something negative happening to you. As with any type of circumstance including a costly acquisition of something that not lots of individuals are experienceded in, education must be an important part of your strategy. This is much more essential if you intend to buy a shade enhanced diamond. Bud Boland has actually been in the fashion jewelry service for 40 years as well as has done whatever from watchmaking, diamond setting, precious jewelry production, and also has been a Jeweler for virtually 35 years. He is a Grad Gemologist from GIA (Gemological Institute of The U.S.A.), which is likewise the area where he was a Teacher. He has actually instructed about rubies to thousands of trainees from all over the world

3 stone diamond

The Big 4 Cs For Loose Diamonds

University Place

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Vintage Wedding Rings in Washington

Marriage Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

heart shaped wedding sets

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

heart shaped wedding sets

Clearness Improved Diamonds - Some Things You Need to Know!

University Place

Buying a diamond engagement ring is quite a deserving purchase every male ought to be fortunate sufficient to earn. Some that do not truly understand too much concerning fashion jewelry and also rubies may feel as if they should just most likely to a shop and pick out a ring which looks appealing to them. Although this might do the trick, there are far better means to picking the most effective possible type of ruby involvement ring for your enjoyed one. The complying with will provide the top 10 secrets to getting a ruby interaction ring.

Search

Possibly one of the very best secrets to bear in mind if you keep in mind nothing else from this list is to look around. Getting a ring of this kind on a whim will most likely not lead you to the most effective offer or the finest ruby. As a result, take your time when looking for an involvement ring, shop around and see what is out there to be acquired.

You Can Find a Beautiful Ruby Interaction Ring on Sale

You must additionally be mindful of that you have the ability to discover a beautiful diamond engagement ring with a beneficial cost attached to it. This is not to state that you need to restrict your choices only to sale things however constantly feel cost-free to peruse the sale counter when searching for an engagement ring to offer to your future fiancée. Do ensure that it is a genuine sale and also not one that runs throughout the year.

Size of the Ruby Really Doesn't Matter

An additional trick when it pertains to getting an interaction ruby ring is that the carat weight size of the diamond is not really what matters when all is claimed and also done. Although some may assume that a bigger diamond amounts to a better diamond this is usually not the case as cut, color as well as quality all have to be considered along with the carat weight of the stone.

Purchasing Online Is an Option

With today's technology, you could purchase virtually anything on-line as well as the exact same holds true for ruby interaction rings. For those that like the concept of an on the internet purchase, there are lots of sites which use diamond rings available and also could supply rather a bargain as well. Simply be specific to obtain documents stating real high quality of the ring. The on the internet organisation must have a Thirty Day cash back guaranty without questions asked.

Purchasing the Ring with Wedding Event Bands Could Conserve Money

You could additionally locate that if you remain in the marketplace for not just an involvement ring yet wedding celebration bands too, acquiring all these things together could save you cash. Certain ring developers will certainly generate engagement rings with matching wedding celebration bands which you could acquire as a set.

White Gold Looks Like Platinum But Is Much Less Pricey

If your loved one likes silver-tone fashion jewelry but you are not able to pay for a platinum diamond engagement ring, consider buying one constructed from white gold. White gold is a great option as it looks like platinum but is a lot less costly.

Fashion Jewelry Stores Usually Have 1 Or 2 Sales Throughout The Year

Another trick to purchasing a ruby engagement ring is that numerous fashion jewelry merchants use sales during the year. Some are vacation sales whereas others are a method for the jewelry store to obtain eliminate the old supply to make room for brand-new items coming right into the shop.

Investing in the Ruby as well as Setup Separately Could Save Money

You might likewise locate that acquiring the ruby as well as establishing separate from one an additional can save you some money. It likewise permits you to pick specifically the kind of ring that you desire as well as be able to see it prior to the stone is established.

Purchasing a Small Carat Weight Dimension with Baguettes Is Sometimes a Better Offer

If you are looking for a diamond involvement ring with a great deal of sparkle however you are incapable to manage a big carat weight ruby, think about acquiring a smaller sized ruby however include baguettes to the ring. This will certainly add shimmer as well as luster and not set you back as much as a bigger ruby might set you back.

Think About Tiny Precious Jewelry Stores Which Deal Personalized Service

For those that are looking for a precious jewelry shop which will certainly give tailored service, you might wish to purchase the ruby engagement ring for your enjoyed one at a little fashion jewelry shop. These precious jewelry shops are frequently run by the individual owner that will do whatever feasible to earn your interaction ring shopping journey incredible.

___________________________________________

Vintage Wedding Rings in Washington

Jewelers in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

gold necklace with small diamond

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

3 stone halo engagement ring

Quality Improved Diamonds - Some Points You Required to Know!

University Place

Engagement rings are readily available in a range of styles, rocks, cuts and shapes. Among all the kinds of stones made use of in engagement rings, rubies are the most precious as well as suitable ones. Their glimmer truly has the capacity to win a female's heart. There is a wonderful collection of ruby involvement rings readily available on the market. Several of the rings are designer productions, which are created according to the customer's choice. They could also be called tailored diamond engagement rings. A few of the jewelry experts offer the clients with the ability of seasoned developers to bring magic to the otherwise normal attributes and shapes.

Designer ruby engagement rings are not only designed inning accordance with the option of customer yet likewise suit their budget. These rings are economical, as compared with the various other diamond interaction rings. The buyers can pick their own ring setups and match the diamonds, to produce an unique item of fashion jewelry for liked ones. Many of the designer diamond involvement rings are made in white gold, yellow gold and also platinum. Aside from the setups and ruby choice, there are a number of other information that play an essential function in creating a ring. Besides choosing a particular design, it is necessary for the purchasers to keep in mind the various mixes of styles. The size, thickness as well as specific size of the rings are also essential and should be thought about while designing a diamond involvement ring. A lot of these rings take around 6 to 8 weeks to be made.

Developer diamond involvement rings are great alternatives, as compared to the readymade rings quickly readily available. These rings offer more contentment to the purchasers and are unique, owing to the individual touch. They give the customer to deal with the design as well as option of rock as well as customize the creation.

___________________________________________

Vintage Wedding Rings in Washington