Unique Wedding Rings in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

opal engagement rings

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

mens rose gold wedding rings

Clarity Boosted Diamonds - Some Points You Required to Know!

Reston

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

2 Karat Diamond Stud Earrings in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

18k diamond tennis bracelet

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Exactly how are diamond cut grades appointed?

This is where points begin to obtain complicated. The approaches made use of to quantitatively evaluate the quality of a cut differ. The means the GIA identifies just what a ruby's cut quality should be, as an example, differs in very particular means from the way other certifiers like the AGS do it. Most of the times, these organizations do not divulge the precise details of the procedures they make use of.

The shape of a ruby additionally makes a difference relative to how its cut quality is established. Although there are some standard criteria that remain the same for any type of kind of ruby, the specific methods made use of to quality a round diamond's cut are various from those utilized to quality a heart-shaped diamond's cut.

The remainder of this description will concentrate on rounded diamonds, as this is by far the most usual diamond form. Among the variables affecting the cut grade of a rounded diamond is the number of facets it has. Facets are the flat, defined areas externally of a ruby. The aspects on round rubies are generally triangular. Currently, it's thought that the excellent round diamond need to have 33 facets on the crown (the area of the ruby that rests above the band, which itself is the largest factor of the diamond) and also 25 on the structure (the lower, longer section of the diamond). When there are blemishes on the surface area of the diamond, cutters may include added facets in order to obscure them. This leads to a deterioration in the total high quality of the cut.

While the aspect matter is normally decideded upon as a great means of judging the high quality of a diamond cut, there are various other factors on which gemologists often differ. A few of the various other aspects made use of by some authorities to assist establish cut qualities consist of the height of the diamond's crown, the deepness of the structure, the diameter of the table (the top of the crown), and also the angles of the crown and also pavilion.

The American Standard criteria for rounded rubies calls for a crown elevation of 16.2%, structure deepness of 43.1%, as well as table diameter of 53% of the complete girdle diameter. The Perfect Great criteria, nevertheless, calls for 19.2% crown elevation, 40% pavilion depth, and 56.5% table diameter. While these differences could be challenging for amateurs to discern, they are an excellent illustration of the difficulties linked with producing a simple evaluation of a diamond's cut.

Although there are some differences about the specific proportions that make up the perfect ruby cut, for prospective diamond buyers, the most important thing to understand is that ruby accreditations given by companies like the AGS and GIA are reliable and meaningful. Trusted diamond vendors base the costs at which they deal diamonds on the cut as well as the remainder of the "4 Cs." When you purchase a diamond, you don't have to stress over the understanding of exactly what makes a good diamond cut changing so much that the worth of your diamond will be substantially influenced.

Which diamond cut quality represents the best worth?

Which kind of diamond is best for you largely relies on your spending plan. For customers that are ready to purchase them, vendors normally suggest diamonds with the highest feasible cut qualities. However, this may result from some self-involvement on their component.

The various other three Cs have an influence on ruby costs as well, so it can be tough to gauge the precise difference in cost in between a Suitable or Superb cut ruby and an Excellent cut. For casual customers as well as budget-conscious financiers alike, rubies with an Excellent or Good cut grade can represent an exceptional worth. This is because, while they can be extra affordable than otherwise equivalent Suitable or Exceptional cut diamonds, the visible difference in high quality is very little.

At the very same time, don't hesitate to utilize your discernment. If, for example, you find a diamond with a Suitable reduced ranking which has good ratings in the various other classifications as well as is still within your budget plan, after that you need to absolutely consider it, as long as you're handling a trusted supplier.

black diamond engagement rings

Exactly how Do You Know If The Ruby Is Phony Or Genuine Diamond?

Reston

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

3 Stone Diamond in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

diamond rings

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

bezel set diamond earrings

Clarity Improved Diamonds - Some Points You Should Know!

Reston

Getting a diamond interaction ring is rather a deserving purchase every male must be lucky adequate making. Some who do not truly understand way too much about precious jewelry and also diamonds could really feel as if they need to simply go to a shop as well as choose a ring which looks eye-catching to them. Although this might work, there are much better methods to choosing the best feasible type of ruby engagement ring for your liked one. The complying with will certainly list the top 10 tricks to getting a diamond interaction ring.

Search

Maybe among the best tricks to remember if you keep in mind nothing else from this listing is to look around. Buying a ring of this kind on an impulse will certainly more than likely not lead you to the ideal deal or the most effective diamond. Therefore, take your time when purchasing an interaction ring, store around as well as see what is available to be purchased.

You Can Find a Beautiful Diamond Engagement Ring for sale

You should likewise know the fact that you have the ability to discover an elegant diamond involvement ring with a favorable price affixed to it. This is not to claim that you need to restrict your selections just to sale things however always don't hesitate to read the sale counter when searching for an involvement ring to offer to your future fiancée. Do make sure that it is a legit sale and also not one that runs all year round.

Dimension of the Diamond Actually Does Not Matter

Another trick when it pertains to buying an involvement ruby ring is that the carat weight dimension of the diamond is not truly exactly what matters when all is claimed as well as done. Although some may think that a bigger diamond equals a better ruby this is usually not the situation as cut, color and also quality all must be thought about along with the carat weight of the stone.

Getting Online Is a Choice

With today's technology, you could buy practically anything on the internet and the exact same is real for ruby interaction rings. For those who like the idea of an on the internet acquisition, there are a lot of internet sites which use diamond rings available for sale as well as may supply quite a good deal as well. Simply be certain to obtain documentation mentioning the real quality of the ring. The on-line company must have an One Month cash back guaranty with no concerns asked.

Purchasing the Ring with Wedding Bands Could Conserve Loan

You may likewise discover that if you remain in the market for not just an interaction ring however wedding bands also, acquiring every one of these things with each other can save you cash. Particular ring designers will produce involvement rings with matching wedding bands which you can buy as a collection.

White Gold Looks Like Platinum However Is Less Costly

If your enjoyed one suches as silver-tone precious jewelry yet you are not able to afford a platinum ruby interaction ring, think about acquiring one constructed from white gold. White gold is a great choice as it appears like platinum however is much less pricey.

Jewelry Sellers Commonly Have One or Two Sales Throughout The Year

An additional key to getting a ruby engagement ring is that several precious jewelry merchants offer sales throughout the year. Some are vacation sales whereas others are a means for the fashion jewelry store to obtain eliminate the old supply to earn area for new products coming into the store.

Purchasing the Diamond and also Setup Separately Can Conserve Money

You may also discover that acquiring the ruby and establishing separate from one another can conserve you some cash. It likewise enables you to choose exactly the kind of ring that you want and be able to see it prior to the rock is set.

Buying a Small Carat Weight Dimension with Baguettes Is In Some Cases a Better Deal

If you are looking for a diamond involvement ring with a great deal of sparkle yet you are incapable to afford a huge carat weight ruby, think about buying a smaller sized ruby however add baguettes to the ring. This will include glimmer as well as sparkle and also not set you back as long as a larger diamond may set you back.

Consider Little Jewelry Stores Which Deal Personalized Solution

For those who are searching for a fashion jewelry shop which will certainly offer individualized service, you might want to acquire the diamond engagement ring for your enjoyed one at a small precious jewelry shop. These precious jewelry stores are frequently run by the private owner that will certainly do whatever possible making your involvement ring buying journey incredible.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Heart Diamond Wedding Ring in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

3 stone diamond ring yellow gold

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

There are a number of designs of interaction rings of 2018 that are incredibly stylish. Everything from lead diamond rings and tinted stones to "green" rings and network established ruby rings became preferred in 2018.

Lead diamond rings are rings with 3 or four rows of small, even-sized diamonds that commonly go around the whole ring. A bigger facility rock set above the remainder of the ring finishes the appearance. Pave ruby engagement rings are among the ideal involvement rings of 2018 since they are a sophisticated choice for an involvement ring while developing a great deal of sparkle on a soon-to-be new bride's ring finger. You'll likewise discover pave diamond wedding bands that match your interaction ring as well as make it much more sparkly.

Colored rocks have likewise grown in appeal. Since of this, rings with colored diamonds are amongst the most effective engagement rings of 2018. Diamonds can be found in a range of shades, consisting of yellow, blue, pink, as well as black. True tinted rubies are exceptionally rare, makings them incredibly pricey. A one-carat tinted ruby could run upwards of 10 thousand dollars. Nonetheless, if you could not manage to invest this much money on an involvement ring, there are a few options that will certainly still permit you to be fashionable with a colored rock. With the most recent technology, you could purchase a manufactured tinted diamond. With the advances that have actually been made, many people can not tell the difference in between an extracted diamond as well as a synthetic one. If you purchase or appoint a synthetic diamond, you can select whichever shade you like, and save numerous thousands of bucks in the meanwhile. Additionally, if you want a tinted rock yet don't need a diamond, emerald greens, sapphires, and rubies make remarkable alternatives for engagement rings and also are much less costly than mined tinted rubies.

Eco-friendly engagement rings are additionally amongst the most effective interaction rings of 2018. With more individuals concerned regarding the environment and also regarding the human legal rights issues that border conventional ruby mining, more people are looking for options to typical involvement rings. One opportunity is to get an interaction ring that has a diamond that was mined in Canada as opposed to South Africa. Canada doesn't have the exact same human civil liberties problems focusing on its diamond market, so it's taken into consideration to be much more friendly to the world. Additionally, buying a synthetic diamond ring is also thought about to be a lot more "green" because not only does it not have the same human rights problems that extracted diamonds do, however it doesn't damage the earth like mining for rubies has a tendency to do. Conversely, the finest engagement rings of 2018 include antique engagement rings since the greenest engagement rings are those that are recycled as well as reused. By buying an interaction ring that is antique, you are not adding to the new diamond ring market or the damage of the setting.

Channel set diamond rings are additionally on the list of best engagement rings of 2018. Channel set interaction rings have the rocks established within the band of the ring, so the top of the rock is even with the top of the ring. Channel established rings are particularly perfect since the diamonds are safeguarded from being damaged because you can not get to the rock to chip them. A lot more popular are channel set ruby rings constructed out of platinum, which has lately expanded in popularity. If you desire to purchase a ring that is much more unique, though, you could have a channel set engagement ring set with stones apart from diamonds. Sapphires are a specifically preferred option for involvement rings.

channel set diamonds

Grading Diamonds in the Rough!

Reston

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

2 Ct Diamond Bracelet in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

channel set diamonds

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

You have been dating the individual of your dreams for rather a long time currently. You may or might not be staying together as a couple, either of both has its own partnership issues; if you do not live as a couple, the feeling of isolation that rises through your heart every time your companion states the words "great bye" after a lovely day well spent with each other inspires you to do even more as well as every single time you turn erroneously to share with him or her your sensations, the vacant area that welcomes you, rapidly transforms your ideas to do more right into a willpower to do even more currently! For those who have actually taken their relationships an action better by relocating in with each other.

As a result of the solitude really felt each time a companion states good bye, different kinds of pressures as well as feelings set in they could be the need to make your love official for the entire globe to see or you both wish to begin a secure household. Whatever encourages you into lastly making the initial action to one of the most important dedication you would ever before make in your entire life might not be off importance however the symbol which you have to provide while taking this action is of miraculous significance - "The Involvement Ring".

Today purchasing an engagement ring has currently end up being the status of recognizing yourself as one who is currently taken and also prepared for marital relationship but have you ever before had fun with the rock or band on your hand as well as considered its history? Considering that it's not specified in the bible or the oldest records that offer in-depth accounts of methods prior to marital relationship in time passed.

The prominent interaction ring of the modern age had its start as recent as the 19th century as well as wasn't constantly a symbol of unequaled love, it was basically the initial component settlement of the bride rate to be paid to the bride's family however handed over and also put on by the bride. It was a sort of insurance policy given for the woman, in case the potential partner which was constantly the man during that time disbands the marriage thereby compromising the woman's virtue as well as interest various other guys.

Real meaning and sign of the engagement ring began radiating via in the 20th century, when men offered their fiancées a band that signified their love and also intents for a marriage union, the involvement ring indicated that she had been taken, out of limits and also ready to be wed to her real love and also it was put on the 4th finger of the left hand, for that finger was thought to have a vein going through it which came directly from the heart consequently representing the finger as a "heart finger". Earlier rings can just be a piece of silver or an iron band with no adornment, which the female inserts right into her fourth finger on her left hand, this was the technique momentarily till business rings and the media took over the involvement scene. The Adverts shown on interaction rings in the middle of the 19th century recommended that males must spend no much less than 2 months of their regular monthly earnings to acquire the ideal ring for his priceless bride-to-be to be and also simply with an advert the interpretation as well as design of the interaction ring took a brand-new direction. The contemporary engagement ring is a sign that reveals that an individual is engaged to be married with design. The cut, pricing as well as make of the engagement ring although not very important, includes a specific flavour to your engagement day or ceremony and has scoffed a brand-new jewellery market all by itself. The Engagement ring now can be found in different layouts; it might be a band made of valuable products such as Gold, Platinum or Silver or maybe a band tied with treasure stones to supply an alluring beauty to the ring. The different significant layouts of interaction rings shall be talked about below.

Different Kinds Of Engagement Rings

Jewelry rings; these are the essential classic interaction rings, the solitaire ring contains a band and also a treasure stone; the band could be made from any type of product of your selection ranging from gold to platinum while the gems need to additionally be opted to fit your peculiar features, maybe rubies or pearl cut in various methods that would certainly be described listed below.

Engagement Rings with Side rocks: These exquisite rings are made with gems inserted right into the sides of the band, which could be made of any type of metal product relying on your preference. Some side rocks sound likewise featured a main stone at the middle. The popular gemstones used for this style of rings are typically rubies yet you can personally tailor your gems to the preference of your love.

The 3 Rock Rings or the Trinity ring: this is a ring style with its very own romantic background, it is believed that each rock in the 3 stone ring symbolizes the past, present and also future of the time where a pair has invested with each other as well as the ring would certainly bind them together for all eternity. The ring style is that of a spotless platinum band with three elegant gemstones; one at the center with 2 location purposefully by the sides. The gems are normally crazy of rubies however you are allowed to tailor your own right into 3 various sorts of gemstones if you so desire.

The Matching Bridal Set: this is an attractive combination of both the involvement ring as well as the real wedding band, there is no collection design on exactly how a matching wedding set must look like however it is normally excellent to have either the interaction ring or the wedding celebration ring emphasizing the other and also the other way around I.e. a beautiful platinum involvement ring with a gemstone ought to be coupled with an easy Gold classic wedding celebration band, supplying the bride with a touch of colour. Tension Rings: let the name not work as a barrier to you when considering the stress ring for it is one of those styles we call easy yet forever classy, it includes a band made from any type of material of your option, securely holding a gemstone in its hold with stress i.e. the gemstone is not held by prongs but gripped in between both sides of the band product you picked. The band material serves as its holding assistance. It is highly advised you go with two contrasting colours for the band and also the gemstone to highlight truth appeal of the stress ring.

The Various Cuts of Gemstones

The Pillow cut: this technique of cutting a gemstone, gives the rock a timeless form that is between a rectangular shape and an oval, it is just one of the most popular jewelry cuts and also it's also understood as the antique cut.

The Marquise cut: the approach utilized in reducing the form of the marquise cut offers the gemstone an oval form in the center with ends. This ring has a timeless elven or must I state earthy look that draws out the supernatural elegance in your bride.

The Emerald cut: the emerald treasure normally has its own specified form as well as this cut approach plainly mirrors it, the emerald cut is a rectangular cut with chopped corners protruding at its 4 ends.

The Asscher cut: this technique of cutting the gemstone provides it a shape individuals claim is similar to the emerald rectangle but it is a lot more octagonal in form than rectangle, the octagonal form aids it catch light and reflect it in different directions. It's a flawlessly attractive cut for a rings gems.

The Princess cut: this is just one of the most previously owned cuts on gems, it is square fit and helps bring out the appeal of the gems utilized fairly demurely. The Round cut: this cut basic looks round yet its more compared to that for it has various spikes added to its surface areas making it among, if not one of the most shining gems cut of the whole lot, it is recognized amongst ladies for its capability to blind the eye (sparkle).

The Heart cut: best for the romantics in mind and formed to belly their hearts, it is a straightforward as well as elegant cut that is rather prominent among ladies. After providing a basic expose on involvement ring designs and cuts, the following action is to give your notice the leaders in the market that gives you with the very best and most expensive rings- in some situations- out there.

Bill Barnes: the producers of several of the most splendid and expensive involvement bands around. Tiffany: everyone understands the name Tiffany this designer residence additionally provides customers with top of the range rings and prices postpone. Tacori: the Tacori layout is additionally one of one of the most looked for after involvement rings in the jewellery industry the cut and plan of its designs are constantly a joy to lay eyes on.

In selecting a ring your budget plan need to additionally enter play so either you acquire Tiffany's or an average engagement ring, it's the thought that counts.

beautiful engagement rings

Fake Or Genuine Diamond And Also Is This Right For You

Reston

To start our feature on different sorts of gems, we will certainly begin with the most effective and also most popular gemstone of them all the diamond. The diamond is the ultimate gemstone. It has really couple of weaknesses and also many strengths. It glows with its extraordinary value and nostalgic worth. It is utilized in wedding celebration rings to stand for countless love or utilized as gifts/jewelry to be provided to liked ones. Yet the ruby is a lot more than its infinite elegance.

The ruby acquires its name from the Greek work adamas meaning irresistible. In solidity, there is no comparison. The diamond rates in the Mohs scale a 10 which is the hardest substance on Planet. Its reducing resistance is 140 times that of the ruby and sapphire, the gems(Diamond) that are following in the Mohs scale in firmness. The ruby's optical residential properties such as gloss and inflexibility make it one-of-a-kind and conveniently distinguished from various other replicas. Enjoy!

* Background of Diamonds

The very first recorded ruby go back around 800 B.C. in India. Some believe it also dated back 6,000 years earlier. The diamonds were used as attractive purposes as well as as talismans to ward off bad as well as supply protection in battle. Throughout the Dark Ages, rubies were also mentioned to be used as a clinical aid. Spiritual doctors also told clients that if they hold a ruby in a hand and also make the sign of the cross would, it would treat and disease and heal injuries.

Diamonds became extra popular throughout the 19th century as a result of exploration of diamond deposits in South Africa. This exploration results in increased supply, boosted cutting and brightening techniques, and also development in economic climate. In 1979, rock hounds found the Argyle pipeline in Australia which to this date is the richest diamond deposit on the planet. Argyle, ever since, alone is responsible for providing over one third of the globe's diamonds every year.

* Diamonds: How are they created?

Rubies is composed of an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Diamonds are produced 90 miles under the Earth's surface at temperature levels of concerning 2200 degrees Fahrenheit. Diamonds are developed deep within the earth and eventually, over incredibly lengthy periods of time, push their way to the earth's surface area, usually via volcanic eruptions.

The age of these rubies from under the surface of the earth are from 1 to 3.3 billion years of ages! When rubies are developed as well as begin their climb to the earth's surface area, they go via networks where the lava from the volcano climbs to the surface, getting rubies along the road as well as ultimately transferring them externally, where they are at some point discovered and extracted.

* The 4 C's of Diamonds

There are 4 unique attributes that determine the worth and high quality of a diamond. These are the shade, cut, clarity as well as carat weight. Otherwise called the 4 C's of a diamond. In the complying with, we will speak regarding these features carefully.

* Shade

In the last e-newsletter, we touch based on the shade of gems as being one of the most vital attribute due to that color is the most evident function. The best ruby must appear clear and also colorless however this is not the case for all rubies. Diamonds can come in any color of the rainbow most usual shade is a color of yellow or brown. The Geological Institute of The U.S.A.(GIA) have created a guideline to grade diamond shade. This guideline contains a lettering system that varies from the alphabet D - Z. Please see below:

D E F No Shade G H I J Almost Anemic K L M Faintly colored, can't rarely be seen and usually yellow in shade N O P Q R Lightly tinted, generally yellow. Can be seen with the nude eye S T U V W X Y Z Tinted, begins with yellow and progresses to brownish

* Clearness

The cut a ruby is identified by the diamond's proportion such as its shape, width and depth. The cut determines just what is called the ruby's "radiance". Even if the ruby itself has ideal shade and clarity, with a bad cut the ruby will certainly have a dull brilliance. This is due to the fact that the cut figures out just how light journeys within the diamond. The Gemological Institute of The U.S.A. has likewise created a clarity grading system to rank diamond quality. This grading system includes Remarkable (Fl), Inside Flawless (IF), Extremely Extremely Slightly Included (VV1 or VV2), Really Somewhat Included(VS1 or VS2), Somewhat Included(SI1 or SI2), and also Consisted Of(I1, I2, and I3). Although this system had actually been added to the ruby market, it is not extensively made use of. This is because of the reality that it took a whole lot of method as well as training to integrate it.

* Cut

The cut a ruby is identified by the ruby's proportion such as its shape, size as well as depth. The cut identifies exactly what is called the ruby's "brilliance". Also if the ruby itself has best shade and also clarity, with a bad cut the diamond will certainly have a boring sparkle. This is since the cut figures out how light travels within the diamond.

There are 3 kinds of cuts that can figure out the diamond's brilliance. These are a superficial cut, a cut that is unfathomable as well as suitable cut. A shallow cut is a cut of a diamond that is also reduced, that light taking a trip with it is lost on the bottom of the stone as well as does not return into sight. This cut makes a ruby appear drab and plain. A cut that is also deep is a cut that is too expensive, that light taking a trip with it leaves through the sides and dims the rock. A perfect cut is an ideal cut on a diamond that reflects light to the top of the stone, giving it perfect luster.

* Carat weight

As specified on the last e-newsletter, a solitary carat weight(ct) weighs regarding 200 milligrams or.2 grams. For smaller sized carat weight diamonds that weigh less compared to a carat weight, it is expressed as factors (pt). Factors are 1/100 of a carat weight. Carat weight of a diamond is necessary as a result of that bigger rubies are rarer than smaller ones, so primarily the bigger the diamond the much more expensive it is. There is no standard grading system or representation that can show different carat weight. This is because there are a lot of variants of rubies fit and also cut, makings stones of comparable weight, look different.

* Imitation Diamonds

Since rubies are the most beneficial and rarest of all the gems, initiatives have been made to duplicate and even boost diamonds using cheaper alternatives. A lot of times, straightforward mistakes have been made and these choices or other gems such as spinel were in some cases puzzled with genuine rubies. In many cases, some deceitful people attempt to offer these choices to misfortunate purchasers in order to revenue. Below we will go over regarding these alternatives and ways to recognize them.

* Synthetic Diamonds

Artificial rubies are rubies that are grown made in a research laboratory. The first well-known cases of diamond synthesis were claimed to be recorded in between 1879 - 1928, yet this was never validated. It wasn't until the 1940's where research began in the USA, Sweden, Soviet Union began investigating. Synthetic diamonds are or else called High Stress High Temperature Level (HPHT) rubies or Chemical Vapor Deposit (CVD) diamonds. The name of both these artificial diamonds originates from the processes utilized to create them. Several of these artificial diamonds might either have greater, lesser or comparable attributes compared to that of a diamond. Therefore, these synthetic diamonds are made use of for abrasives, reducing as well as polishing devices, as well as changes in power plant.

* Simulants

Simulants are non-diamond substances that are used to reproduce the appearance and even the shape of a diamond. The most basic as well as well recognized simulant is cubic zirconia (CZ). CZ at ordinary sight can sparkle greater than a diamond and also it is much less thick, meaning that a 1 carat weight CZ will be much bigger compared to a 1 carat ruby. Nowadays, a more popular simulant is moissanite, which has all the very same features of a diamond. These attributes include firmness (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 and also ruby -2.42) and diffusion (Moissanite -.104 and diamond -.044). This makes it difficult to set apart the 2 at plain view as well as would often need testers to inform the difference. In the next area we will certainly go over how you can identify moissanites and also various other imitations.

* Actual or Counterfeit?

An old approach of identifying rubies is to do a scrape test. This requires damaging a diamond with another ruby which is devastating and is seldom used nowadays. The very best and also most trusted way to check for rubies is to use testers that make use of thermal conductivity. These testers are composed of battery powered thermistors placed with a retracting copper tip. This tester functions by injecting the heat into the evaluated rock then the tool measures the quantity of heat that it conducts. Nonetheless thermal conductivity testers functions best to identify rubies and also its various other simulants, it will not assist identify laboratory produced or synthetic rocks. To be able to identify these, specific optical methods are needed. Laboratories make use of methods such as spectroscopy, microscopy and also luminescence in order to determine a certain stones beginning. The ordinary individual could use loupes and also microscopes to identify artificial rocks. All-natural rubies generally have small flaws and also imperfections such as incorporations or some sort of international product, which will certainly not be located in synthetics.

___________________________________________

Rose Gold Diamond Necklace in Virginia