5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Millbrae, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Millbrae, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Millbrae. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Millbrae to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Millbrae for you engagement or wedding.
Millbrae How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To start our attribute on various types of gems, we will begin with the best and most popular gemstone of them all the diamond. The ruby is the best gemstone. It has extremely few weak points and also numerous toughness. It shines with its amazing worth and sentimental value. It is utilized in wedding rings to stand for unlimited love or made use of as gifts/jewelry to be provided to enjoyed ones. However the ruby is so a lot greater than its everlasting beauty.
The diamond acquires its name from the Greek work adamas indicating unequalled. In firmness, there is no comparison. The diamond prices in the Mohs scale a 10 which is the hardest material on Planet. Its cutting resistance is 140 times that of the ruby and also sapphire, the gems(Corundum) that are following in the Mohs range in solidity. The diamond's optical properties such as radiance as well as rigidity make it distinct and easily differentiated from various other imitations. Enjoy!
* Background of Diamonds
The initial recorded diamond go back around 800 B.C. in India. Some think it also went back 6,000 years earlier. The rubies were used as ornamental purposes and as talismans to fend off evil and provide defense in fight. Throughout the Dark Ages, rubies were also mentioned to be made use of as a clinical help. Spiritual physicians also told individuals that if they hold a diamond in a hand and make the sign of the cross would certainly, it would certainly heal as well as illness and also recover injuries.
Rubies ended up being extra preferred throughout the 19th century due to exploration of diamond deposits in South Africa. This exploration causes increased supply, improved cutting and brightening methods, and also development in economy. In 1979, rock hounds discovered the Argyle pipe in Australia which to this date is the wealthiest ruby deposit in the world. Argyle, ever since, alone is responsible for providing over one third of the globe's diamonds yearly.
* Diamonds: How are they created?
Rubies consists of an allotrope of carbons that are developed in high-pressure, high-temperature conditions. Diamonds are created 90 miles under the Earth's surface area at temperature levels of concerning 2200 levels Fahrenheit. Rubies are formed deep within the earth and also ultimately, over very long periods of time, press their way to the earth's surface area, generally through volcanic eruptions.
The age of these diamonds from below the surface area of the planet are from 1 to 3.3 billion years of ages! When rubies are formed and also start their ascent to the planet's surface area, they undergo channels where the magma from the volcano rises to the surface area, getting rubies along the road and also eventually depositing them on the surface, where they are at some point located and also mined.
* The 4 C's of Diamonds
There are 4 distinctive characteristics that establish the value and quality of a diamond. These are the shade, cut, quality as well as carat weight. Or else recognized as the 4 C's of a ruby. In the complying with, we will certainly discuss these features thoroughly.
In the last newsletter, we touch based on the color of gemstones as being the most vital function as a result of the truth that shade is the most obvious feature. The excellent ruby needs to show up clear and anemic yet this is not the situation for all rubies. Rubies can can be found in any type of color of the rainbow most usual color is a shade of yellow or brown. The Geological Institute of The U.S.A.(GIA) have created a guideline to grade ruby color. This guideline consists of a lettering system that ranges from the alphabet D - Z. Please see listed below:
D E F No Shade G H I J Nearly Anemic K L M Faintly tinted, can't hardly be seen as well as typically yellow in shade N O P Q R Gently tinted, typically yellow. Can be seen with the naked eye S T U V W X Y Z Tinted, starts from yellow and also proceeds to brown
The cut a ruby is established by the ruby's percentage such as its form, size and also deepness. The cut identifies exactly what is called the diamond's "brilliance". Even if the ruby itself has best color and clarity, with a poor cut the diamond will have a dull radiance. This is because the cut determines how light journeys within the ruby. The Gemological Institute of The U.S.A. has actually also developed a clarity grading system to place diamond quality. This grading system includes Perfect (Fl), Internally Perfect (IF), Really Really A Little Included (VV1 or VV2), Extremely Slightly Consisted Of(VS1 or VS2), Somewhat Included(SI1 or SI2), and also Included(I1, I2, and also I3). Although this system had actually been added to the ruby industry, it is not extensively utilized. This is due to that it took a great deal of method and training to incorporate it.
The cut a diamond is identified by the diamond's percentage such as its shape, size and also depth. The cut establishes exactly what is called the diamond's "luster". Also if the ruby itself has ideal shade and clearness, with an inadequate cut the ruby will certainly have a boring radiance. This is since the cut determines just how light trips within the ruby.
There are 3 kinds of cuts that can identify the diamond's luster. These are a superficial cut, a cut that is also deep and also excellent cut. A shallow cut is a cut of a ruby that is as well reduced, that light traveling via it is lost on the bottom of the rock as well as does not return right into view. This cut makes a diamond appear lifeless as well as plain. A cut that is too deep is a cut that is also high, that light taking a trip via it escapes via the sides and also dims the stone. A suitable cut is a best cut on a diamond that mirrors light to the top of the stone, providing it best luster.
* Carat weight
As stated on the last e-newsletter, a single carat weight(ct) evaluates about 200 milligrams or.2 grams. For smaller sized carat diamonds that weigh much less than a carat, it is shared as points (pt). Factors are 1/100 of a carat. Carat weight of a diamond is essential due to the fact that larger rubies are rarer compared to smaller sized ones, so essentially the larger the diamond the more pricey it is. There is no basic grading system or representation that could show different carat weight. This is due to the fact that there are a lot of variations of diamonds fit and cut, that makes stones of comparable weight, look different.
* Replica Diamonds
Considering that rubies are one of the most important and rarest of all the gemstones, initiatives have actually been made to replicate and even boost diamonds making use of cheaper options. A great deal of times, straightforward blunders have actually been made and also these alternatives or other gemstones such as spinel were in some cases confused with genuine rubies. In many cases, some deceitful people try to sell these alternatives to misfortunate customers in order to earnings. Below we will certainly review regarding these choices and ways to recognize them.
* Artificial Diamonds
Synthetic diamonds are diamonds that are expanded manufactured in a laboratory. The first known cases of ruby synthesis were declared to be recorded in between 1879 - 1928, yet this was never ever verified. It had not been till the 1940's where research study started in the United States, Sweden, Soviet Union began researching. Synthetic rubies are otherwise called High Pressure High Temperature (HPHT) diamonds or Chemical Vapor Deposit (CVD) diamonds. The name of both these artificial diamonds originates from the procedures utilized to develop them. Some of these synthetic diamonds might either have greater, minimal or similar qualities compared to that of a diamond. Consequently, these artificial diamonds are used for abrasives, reducing and brightening devices, as well as switches over in power terminals.
Simulants are non-diamond compounds that are utilized to duplicate the appearance as well as the form of a diamond. One of the most basic and well recognized simulant is cubic zirconia (CZ). CZ at plain sight could glimmer greater than a ruby and it is less thick, meaning that a 1 carat CZ will be a lot larger than a 1 carat ruby. Nowadays, a more popular simulant is moissanite, which has just the same characteristics of a diamond. These qualities consist of firmness (Moissanite-9.25 as well as diamond-10 in Mohs range), refractive index(Moissanite -2.65 and ruby -2.42) and diffusion (Moissanite -.104 and diamond -.044). This makes it hard to separate the two at ordinary sight as well as would frequently call for testers to inform the distinction. In the next area we will discuss ways to recognize moissanites and various other replicas.
* Actual or Phony?
An old technique of recognizing rubies is to do a scratch examination. This requires scratching a diamond with an additional ruby which is damaging and also is rarely used nowadays. The finest and most dependable way to test for diamonds is to utilize testers that utilize thermal conductivity. These testers are composed of battery powered thermistors placed with a retractable copper idea. This tester functions by injecting the warmth into the tested rock and after that the gadget determines the quantity of heat that it conducts. Nonetheless thermal conductivity testers functions best to identify diamonds as well as its various other simulants, it will certainly not assist identify laboratory produced or synthetic stones. To be able to determine these, certain optical methods are needed. Laboratories utilize techniques such as spectroscopy, microscopy and also luminescence in order to establish a particular stones origin. The ordinary person could use loupes and microscopic lens to identify artificial rocks. Natural rubies usually have minor imperfections and also imperfections such as additions or some kind of foreign product, which will not be found in synthetics.
How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.