Rose Gold Diamond in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

marriage rings

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Not all sellers offer ruby grading lab reports (also known as ruby top quality records) to their customers. So my basic guidance to you is to keep your cash in your pocket when dealing with such jewelry experts.

Just buy a diamond involvement ring if it comes with the initial ruby quality report.

A lab report is an independent assessment of the 4Cs of a loose diamond and consists of a plotted diagram of the rock's clarity characteristics and also a visuals depiction of the rock's proportions. Having such a record allows you to compare rubies of different qualities and eventually aids you make a more educated purchasing decision.

A seller could reduce edges as well as not supply a lab report or an unscrupulous seller could provide a fake one due to the time, trouble as well as expenditure he'll bear to obtaining a rock rated.

Yeah - there is a rate for rating a diamond (though that expense is ultimately paid by the consumer), plus the delivery as well as insurance costs for sending the diamond to the lab. And let us not neglect the possibility expense of a jeweler not having the diamond in his shop available for a couple of weeks while the grading happens.

Nevertheless, a ruby grading report may additionally not be available since the prices to obtaining one might influence also heavily on the final price of the ring. For instance, a 0.3 ct ruby ring setting you back $250 state, might set you back around $75 to be graded as well as have the record number engraved on the girdle on the ruby. As you look for that optimal diamond interaction ring for your sweetheart, you'll locate that there is an alphabet soup of laboratories asserting to offer trusted diamond grading reports. However I would only put my cash on ...

The Premier Diamond Grading Lab Reports

Yes, all diamond high quality reports are not produced equivalent. Within the industry, it is an agreement that both premier laboratories are GIA-GTL (Gemological Institute of America's Treasure Profession Laboratory) and also the AGS (American Treasure Culture Laboratories).

The GCAL (Treasure Accreditation and also Guarantee Lab) likewise offers highly pertained to records or "ruby certificates" as they are described by GCAL. The GIA has the greatest international online reputation for self-reliance and consistency. Because of their continuous shade as well as clarity strictness guidelines, the globe's biggest and also most costly diamonds have actually been sent there for rating years. In 2006, GIA-GTL added a two-dimensional cut grading system for rounded fantastic diamonds.

AGS makes use of the strictest cut criteria in the industry. It uses a three-dimensional light efficiency metric that could grade several diamond forms. Actually, it is the only cut grading system that is acknowledged by the clinical community.

Just what is even more, its Ruby Top quality File uses a special and proprietary 0 to 10 grading system to assess the 4 Cs - a system which is much easier to comprehend compared to GIA's grading system. Actually, AGS even goes the added step by equating their 0-10 score range to other forms of ranking. For instance, the traditional VS1 diamond clarity rating is a 3 on the AGS Ruby Top Quality Record.

Diamond Reporting - The Drawbacks

1. Diamond grading is not standard or controlled as well as therefore you might discover tier 2 labs that utilize looser guidelines to the tier 1 grading labs discussed over. If you buy a diamond that has actually been rated by a tier 2 laboratory, you might wind up paying much more for a lower high quality ruby. So for instance, a ruby rated a "F" in shade at a rate 2 laboratory could obtain a G, H, or lower shade ranking at a more trustworthy laboratory. The industry also marks down diamonds rated by lower recognized laboratories by about 15-30% or even more. So either you only acquire a ruby rated by a rate 1 laboratory or you accept that you may be buying a lower top quality ruby than what is stated on the report if that ruby is rated by a minimal recognized laboratory.

2. Lots of large chain stores have significant agreements with lesser recognized labs with "softer" ruby grading standards. A few of these softer labs put "recommended replacement values" on the lab reports - values which are higher compared to what shops plans market the diamonds for. So a salesman in a chain store might state to you, "Check out the large amount you are getting below. We are selling you this ruby interaction ring for $2500 yet the report claims that the recommended replacement worth is $4000." Wow - exactly what a deal - NOT! This is why it is much better that you rely on only independent tier 1 labs.

Additionally remember that respectable ruby rating records are not appraisals and don't provide appraisal figures. Ruby assessments are commonly grossly inflated and are not something you'll intend to rely upon.

3. Diamond records are riddled with please notes that define that absolutely nothing is "accredited" or assured which the laboratories are not accountable for errors. As a matter of fact, the GIA provides a please note of sorts on their internet site concerning making use of the word "accredit." The internet site claims:

"It is wrong to state that students, grads, their organisations, or particular gems are "accredited" by GIA. The Gemological Institute of The U.S.A. does not license any person or anything. Neither a trainee neither a grad who has been granted a certificate or diploma, nor a gem which has been graded or identified by GIA has been certified by GIA".

So it is feasible that you the consumer is left holding the bag ought to an inaccuracy in a record is later uncovered. Courts have actually frequently ruled that vendors, not laboratories, are responsible for such errors. Why? Since the labs showed ahead of time that their reports couldn't be held accountable.

Luckily, there are a couple methods to provide on your own much more purchaser defense:

A. You could fly to India where jewelers supply a lifetime buyback policy to their customers. As well costly to fly?

B. You can find among the 20% of US jewelers that offer totally bonded diamonds. These are rubies that are marketed with lifetime damage, lifetime trade-in and life time buyback policies.

C. Not as excellent a treatment as acquiring a totally bound ruby yet you might buy a ruby that features a real "certificate" and also not a record. "Certified rubies do have guaranties" albeit for much shorter durations.

Qualification Some vendors refer to a "diamond report" as a "qualified diamond" however technically this is not fix. From a legal standpoint, a ruby record is a just a professional viewpoint though in reality, elements of a ruby grading record are not simply viewpoints.

For example, a diamond's carat (weight) can be properly determined as well as its cut quality by determining its optical effectiveness or by describing a computer version. A certificate on the various other hand is a statement of truth - a paper for which the provider accepts legal obligation and will certainly make restitution to the consumer for blunders.

Some top ruby grading labs use both reports and certifications. AGS supplies Diamond Top quality Documents (non-certified records) as well as Ruby Top quality Certificates. Ruby Top quality Certificates are ready specifically for AGS retail jewelers and also supplies warranties from taking part American Treasure Society participant shops.

GCAL certifies it's diamond grading additionally. Its 100% money-back guarantee policy stands for a duration of two years from the date on the suitable certificate. This plan makes certain the accuracy of the cut, color as well as clarity qualities and the carat weight.

A record or certificate should will certainly have a number on it that might or may not be inscribed on a ruby. You will certainly be able to enter that number on the site of the licensing lab to examine a record's credibility.

Components Of A Ruby Grading Report Diamond grading records are constantly developing however particular aspect ought to stay the exact same. As an example, the:

The Record #. This number is offered and also tape-recorded in a laboratory's document as well as might or might not be engraved on a diamond's girdle. You could get in the report number on a grading lab's internet site to examine the authenticity of the diamond quality report or to obtain even more info about the ruby. Forming & Aspect Design: This is the synopsis as well as the reducing style utilized for the aspect arrangement. There are 3 fundamental aspect designs - "great cut, action cut as well as mixed cutting design" and 12 standard forms which include notables such as round great and princess cut" rubies.

Dimensions: This describes size (not weight) of a ruby. Size includes measurements such as length, size, weight and size. A dimension is typically listed to the hundredth of a millimeter. Dimensions play a significant role in just how a diamond shines.

Carat weight Weight: The weight of a ruby is measured to the hundredth of a carat weight as well as some even offer such measure to the thousandth of a carat weight (1.123 ct.). Carat weight is the most objective and also the easiest to understand of the 4Cs because all one has to do is weight the rock. Shade Grade: This tells you the level of color lack in the diamond. The less color the higher the quality.

Rubies are commonly rated from D-Z; the closer to "D" the whiter the diamond. You ought to never see ruby color array such as (G-H, I-J-K, and so forth) on a diamond record. You ought to just see shade ranges on evaluations for rocks that are installed.

Quality Grade: Virtually every ruby has internal imperfections called inclusions and external imperfections called blemishes. A ruby is graded inning accordance with the dimension, type, location and also amount of these defects.

Clearness qualities vary from Flawless (FL) - Included. Labs use a pair specialists to quality the quality of a diamond in order to come up with an extra accurate reading.

Cut Grade: Extra recent ruby records include a cut quality for common round great rubies. Cut takes into account the sparkle, fire as well as scintillation of the ruby. Cut quality ranges from Excellent - Poor.

Various other components you might find on a ruby record include the polish, symmetry, fluorescence and percentage. Armed with this info, you are better able making an analysis of the top quality of diamond that is mounted in an interaction ring.

white gold diamond necklace

What You Had to Know When Getting a Diamond Ring

University Place

Purchasing a ruby involvement ring is rather a worthy purchase every man ought to be fortunate adequate to earn. Some who do not actually understand excessive about precious jewelry as well as diamonds could really feel as if they should just go to a store as well as choose a ring which looks attractive to them. Although this could suffice, there are much better ways to picking the most effective possible kind of diamond involvement ring for your liked one. The adhering to will provide the leading 10 tricks to getting a diamond involvement ring.

Search

Possibly among the ideal secrets to bear in mind if you bear in mind nothing else from this checklist is to search. Getting a ring of this type on a whim will most likely not lead you to the most effective bargain or the most effective diamond. For that reason, take your time when looking for an involvement ring, store around as well as see just what is out there to be acquired.

You Could Locate a Stunning Ruby Engagement Ring for sale

You must likewise understand the truth that you are able to locate an elegant diamond interaction ring with a beneficial price affixed to it. This is not to say that you need to restrict your selections only to sale products however constantly don't hesitate to read the sale counter when browsing for an engagement ring to give to your future fiancée. Do ensure that it is a genuine sale as well as not one that runs all the time.

Dimension of the Diamond Really Doesn't Matter

Another trick when it concerns purchasing an engagement ruby ring is that the carat dimension of the ruby is not truly just what matters when all is said and done. Although some might believe that a larger ruby equals a much better diamond this is frequently not the case as cut, shade as well as quality all need to be thought about in enhancement to the carat weight of the stone.

Buying Online Is an Option

With today's modern technology, you could acquire practically anything on-line as well as the same holds true for diamond involvement rings. For those who such as the idea of an on-line acquisition, there are a lot of web sites which supply diamond rings to buy as well as may supply fairly a great offer as well. Simply be specific to obtain paperwork mentioning the true quality of the ring. The online organisation should have a Thirty Days loan back guaranty with no concerns asked.

Getting the Ring with Wedding Bands Could Conserve Loan

You could likewise discover that if you are in the market for not only an involvement ring however wedding event bands too, purchasing all of these items together could save you money. Certain ring developers will certainly generate involvement rings with matching wedding celebration bands which you can purchase as a set.

White Gold Resembles Platinum But Is More Economical

If your enjoyed one suches as silver-tone jewelry however you are not able to manage a platinum diamond involvement ring, think about getting one made of white gold. White gold is a good choice as it resembles platinum but is much less pricey.

Precious Jewelry Sellers Typically Have 1 Or 2 Sales Throughout The Year

One more trick to acquiring a ruby engagement ring is that many fashion jewelry stores use sales during the year. Some are holiday sales whereas others are a method for the precious jewelry shop to obtain eliminate the old inventory to make room for brand-new products coming right into the store.

Getting the Diamond and Setup Separately Could Save Money

You may additionally find that buying the ruby and setting separate from each other can conserve you some loan. It also permits you to pick specifically the kind of ring that you want and also have the ability to see it prior to the stone is established.

Purchasing a Small Carat Weight Size with Baguettes Is Sometimes a Better Bargain

If you are looking for a ruby engagement ring with a great deal of sparkle but you are not able to pay for a huge carat weight ruby, take into consideration getting a smaller diamond but add baguettes to the ring. This will certainly add glimmer as well as sparkle and not cost as high as a bigger diamond may set you back.

Take Into Consideration Little Precious Jewelry Stores Which Offer Personalized Service

For those that are looking for a jewelry store which will provide customized service, you could want to get the ruby interaction ring for your loved one at a little precious jewelry store. These precious jewelry stores are typically run by the specific owner that will certainly do every little thing possible making your involvement ring shopping journey amazing.

___________________________________________

Vintage Wedding Rings in Washington

Rose Gold Engagement Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

3 stone halo engagement ring

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

There are a number of styles of interaction rings of 2018 that are extremely trendy. Whatever from pave diamond rings and also colored rocks to "environment-friendly" rings as well as network set ruby rings ended up being really preferred in 2018.

Lead ruby rings are rings with 3 or four rows of tiny, even-sized diamonds that typically go around the entire ring. A bigger center rock established over the remainder of the ring completes the appearance. Lead ruby interaction rings are among the ideal engagement rings of 2018 because they are an elegant option for an involvement ring while creating a great deal of sparkle on a soon-to-be bride's ring finger. You'll also find lead diamond wedding bands that match your engagement ring and also make it a lot more sparkly.

Colored stones have also grown in popularity. Due to this, rings with colored rubies are among the very best interaction rings of 2018. Diamonds can be found in a range of shades, consisting of yellow, blue, pink, as well as black. Real colored rubies are incredibly uncommon, that makes them very costly. A one-carat tinted diamond could run upwards of 10 thousand bucks. However, if you can not manage to spend this much cash on an engagement ring, there are a few alternatives that will still allow you to be fashionable with a tinted stone. With the current modern technology, you could purchase a man-made colored ruby. With the breakthroughs that have actually been made, lots of people could not inform the difference in between an extracted diamond as well as a synthetic one. If you purchase or commission a man-made diamond, you could pick whichever shade you like, as well as conserve numerous thousands of bucks in the meanwhile. Additionally, if you desire a tinted stone yet do not need a ruby, emeralds, sapphires, and rubies make wonderful choices for interaction rings as well as are much less costly than mined tinted diamonds.

Environment-friendly interaction rings are also amongst the best interaction rings of 2018. With more people concerned concerning the atmosphere and also concerning the human rights issues that surround conventional ruby mining, even more people are trying to find options to conventional involvement rings. One possibility is to purchase an engagement ring that has a ruby that was mined in Canada as opposed to South Africa. Canada doesn't have the exact same human civil liberties problems focusing on its ruby market, so it's thought about to be more pleasant to the globe. Alternatively, purchasing a synthetic ruby ring is additionally thought about to be extra "green" due to the fact that not only does it not have the same human rights issues that mined rubies do, yet it doesn't ruin the earth like mining for rubies has a propensity to do. Alternatively, the most effective interaction rings of 2018 include antique engagement rings considering that the greenest engagement rings are those that are reused and recycled. By buying an engagement ring that is antique, you are not adding to the new ruby ring market or the destruction of the atmosphere.

Channel established ruby rings are likewise on the listing of finest interaction rings of 2018. Network collection involvement rings have actually the stones established within the band of the ring, so the top of the rock is despite the top of the ring. Network set rings are particularly suitable because the diamonds are protected from being damaged due to the fact that you could not obtain to the stone to chip them. Also extra preferred are channel collection ruby rings constructed out of platinum, which has actually lately expanded in popularity. If you want to purchase a ring that is much more unique, however, you could have a channel collection interaction ring established with stones aside from rubies. Sapphires are an especially preferred selection for engagement rings.

three diamond engagement ring

What You Had to Know When Acquiring a Diamond Ring

University Place

Engagement rings are offered in a variety of designs, stones, cuts and also shapes. Amongst all the kinds of stones used in interaction rings, diamonds are one of the most valuable and also ideal ones. Their sparkle genuinely has the capacity to win a female's heart. There is a wonderful collection of ruby interaction rings readily available in the marketplace. Several of the rings are designer creations, which are made based on the consumer's selection. They can additionally be called customized diamond engagement rings. Several of the jewelers supply the consumers with the ability of knowledgeable developers to bring magic to the otherwise regular functions and forms.

Designer ruby involvement rings are not just designed inning accordance with the option of consumer but likewise fit their spending plan. These rings are budget friendly, as as compared to the other ruby interaction rings. The buyers can pick their very own ring settings as well as match the diamonds, to develop a special piece of jewelry for loved ones. Many of the designer diamond involvement rings are made in white gold, yellow gold and also platinum. Besides the settings and ruby selection, there are a variety of other details that play a vital duty in making a ring. Apart from selecting a particular design, it is essential for the buyers to keep in mind the various combinations of layouts. The width, thickness and precise dimension of the rings are also crucial and should be considered while creating a ruby involvement ring. Many of these rings take about 6 to 8 weeks to be made.

Developer ruby involvement rings are great options, compared with the readymade rings conveniently offered. These rings use even more fulfillment to the purchasers as well as are unique, owing to the personal touch. They provide the buyer to deal with the design as well as selection of stone and also individualize the development.

___________________________________________

Vintage Wedding Rings in Washington

Marriage Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

diamond rings

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

white gold diamond necklace

Grading Rough Diamonds!

University Place

Rubies are normally readily available in an extremely large range of shades. Most individuals find out about anemic diamonds and also GIA's shade grading system that is used to categorize a ruby's body shade ... you recognize D, E, F, and so on. This color grading system is only utilized to categorize one of the most common diamond body color of yellow however anytime a ruby is located in one more shade like pink, blue, eco-friendly, and so on; then this diamond is referred to as a "" fancy diamond"".

Natural Fancy rubies could be very expensive as well as sometimes extra pricey than a similar dimension colorless diamond. An excellent instance of a Fancy diamond is the notorious 45.52 carat weight elegant deep blue ruby, the Hope Ruby, which gets on screen in the Smithsonian Natural Background Gallery in Washington, DC.

A shade enhanced ruby is a 100% all-natural ruby that has actually had its shade transformed. And ideal of all, shade improved rubies can be found in a really large selection of colors at very budget-friendly rates!

A bit of background- For lots of, several years it has been popular that a diamond's color could be "" boosted"" by placing a little tinted material on the surface area of a ruby as well as similar to magic ... a diamond that had a visible yellowish color would alter to a more eye-catching near colorless diamond. Sadly, this kind of shade enhanced ruby can alter back to its original body shade if this tinted compound was accidentally eliminated. In more recent years, the modern technology of shade enhanced rubies has gone exceptionally advanced. It is now possible to totally transform the shade of a diamond! These processes are thought about long-term because it does continue to be secure when revealed to day-to-day typical problems. The shade will certainly not discolor if exposed to sunlight or be washed off by rough chemicals.

Exactly how is it done? The wanted outcome of any of these therapies is to have a much more marketable diamond. A much less valuable ruby would certainly be a ruby that has a reduced body color or sometimes a lower quality. The shade improved ruby treatment companies understand if they begin with a certain sort of ruby as well as process it for a certain amount of time that they must finish up with a certain shade however it does not always work this way. This is a science that does need some art in their procedures ... the only process that provides consistent outcomes is the finish procedure.

The 3 processes are as follows- Refine # 1- HPHT Color Improved Diamonds- High Pressure/ Heat (HPHT) treatment can enhance the color of certain sorts of brownish rubies as well as hence raise their worth. General Electric has developed a procedure that basically is a mechanical simulation of a ruby's creation in nature. The color boosted diamond will certainly be warmed up to an extremely high temperature level under a really high, supported pressure. Mistakes in the crystal structure are after that rearranged resulting in a modification of the diamond's shade. Since the conditions of HPHT are extremely comparable to diamond's initial formation, just a well outfitted laboratory will have the ability to positively recognize this kind of shade improved diamond. HPHT wased initially utilized to turn yellowish diamonds into more marketable fancy colored improved rubies, yet currently it is also utilized to transform some out of favor brownish diamonds right into better anemic colored boosted rubies.

Process # 2- Irradiated Color Boosted Diamonds- OK ... do not begin obtaining all excited due to the fact that you saw the word irradiated! This is a 100% secure procedure that is extremely much like what is made use of to maintain food by exposing it to a stream of Gamma rays. The color improved diamond process is performed in several different means yet the results are just the same. You begin with a reduced shade (P, Q, R, etc.) 100% all-natural ruby that has currently been cut and polished, after that it is exposed to a stream of rapid electrons. During this component of the process the diamond will rely on a very dark color due to the fact that several of the atoms in the diamond's crystal framework have actually now been dislocated and also this subsequently has influenced the method light travel through the diamond. Next the ruby goes with a controlled heating (annealing) procedure, this allows a few of those atoms to transfer (partially repaired) in order to obtain a wanted color.

Process # 3- Layered Shade Enhanced Diamonds- The finishing on refined diamonds describes a slim fabricated layer that alters the color of the diamond. The finishing can either be of the desired shade or can create a colored interference-effect. Regrettably occasionally this process is done to trick a customer. It is a fairly easy procedure to carry out, it has been around for years (although the coatings materials are far better currently), as well as it does not require a great deal of costly advanced tools. Recently, I have actually seen some pink covered rubies on the marketplace, they are very attractive ... and obviously you would have to buy them knowing that they have been covered as well as follow your jeweler's standards regarding owning and also taking care of these shade improved rubies. The covering could be applied to the whole of a diamond's surface, simply the base of the ruby, or to a narrow area near the girdle. A well-applied coating could alter the shade by several color quality. Some coatings could be eliminated with boiling in acid, strong cleaning solutions, and even family chemicals. Often dots or bigger areas of purple or blue ink are repainted on the diamond to assist counteract a yellow-colored shade. The ruby's setting will usually cover the dots, so they are difficult to see in an installed stone.

So, is a shade boosted ruby right for you? Maybe ... all-natural elegant shade diamonds could be lovely yet they are costly! Color boosted rubies are economical as well as permit many individuals to own a brilliantly colored ruby. Ask your regional jeweler if they have any kind of Fancy rubies ... either natural or shade boosted rubies. It is constantly interesting, and fun, to check out something different!

Under typical wear the irradiated as well as HPHT shade boosted diamonds will certainly have no problems of the color fading away. The only factor to consider will certainly be when you have to have any kind of type of solution done on the item of precious jewelry. If this kind of shade boosted diamond is exposed to extreme quantities of warmth it might affect the shade. The jewelry expert will certainly need to recognize that the ruby is a shade enhanced ruby before any job is done and afterwards the jeweler will be able to pick the very best strategy. Shade enhanced rubies are currently likewise used as the small accent diamonds around a bigger colorless diamond. There are many exciting items of jewelry readily available with little blue, yellow, black, or environment-friendly color enhanced diamonds.

Since you find out about shade improved diamonds and someone attempts to offer you on what they call a natural expensive colored diamond however it is at a super bargain price ... you will certainly understand that something just does not seem right about the offer. A report from a revered grading lab must accompany natural Fancy colored diamonds that are marketed as all-natural. If you handle a credible firm as well as you have actually been guaranteed concerning what you are getting, after that you will certainly lessen the opportunity of something negative occurring to you. As with any kind of circumstance involving an expensive acquisition of something that very few people are experienceded in, education and learning needs to be an important part of your plan. This is much more crucial if you intend to buy a color boosted diamond. Bud Boland has remained in the jewelry service for 40 years and also has done everything from watchmaking, ruby setting, jewelry making, and also has actually been a Gemologist for virtually 35 years. He is a Grad Jeweler from GIA (Gemological Institute of America), which is also the place where he was an Instructor. He has educated regarding rubies to hundreds of students from all around the world

___________________________________________

Vintage Wedding Rings in Washington

Jewelers in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

white gold princess cut diamond ring

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Not all sellers supply diamond grading laboratory records (aka diamond top quality records) to their customers. So my basic advice to you is to maintain your loan in your pocket when taking care of such jewelers.

Just buy a diamond engagement ring if it includes the initial ruby quality report.

A laboratory report is an independent assessment of the 4Cs of a loosened diamond and also consists of a plotted diagram of the rock's clearness characteristics and also a visuals representation of the rock's proportions. Having such a record allows you to contrast diamonds of various qualities and also inevitably aids you make a more notified purchasing decision.

A store might reduce corners as well as not provide a laboratory report or an unscrupulous seller may provide a phony one due to the time, trouble and also expense he'll birth to obtaining a stone graded.

Yeah - there is a price for grading a diamond (though that cost is eventually paid by the consumer), plus the shipping as well as insurance policy fees for sending out the ruby to the lab. And also allow us not neglect the chance cost of a jewelry expert not having the diamond in his store offer for sale for a couple of weeks while the grading occurs.

Nonetheless, a diamond grading record might additionally not be readily available since the costs to obtaining one might impact also heavily on the last cost of the ring. For example, a 0.3 ct diamond ring costing $250 state, may cost around $75 to be rated and also have the report number inscribed on the band on the diamond. As you look for that excellent diamond involvement ring for your sweetie, you'll discover that there is an alphabet soup of labs declaring to supply credible ruby rating records. But I would only put my cash on ...

The Premier Ruby Grading Laboratory Reports

Yes, all diamond quality reports are not produced equivalent. Within the sector, it is an agreement that the two leading laboratories are GIA-GTL (Gemological Institute of America's Gem Trade Laboratory) as well as the AGS (American Treasure Culture Laboratories).

The GCAL (Gem Qualification and Guarantee Laboratory) likewise offers highly concerned reports or "ruby certificates" as they are referred to by GCAL. The GIA has the best global online reputation for independence and uniformity. Due to their continuous color and clearness strictness standards, the world's largest as well as most expensive rubies have been sent there for grading years. In 2006, GIA-GTL included a two-dimensional cut grading system for round brilliant diamonds.

AGS utilizes the most strict cut requirements in the industry. It makes use of a three-dimensional light efficiency metric that could grade a number of ruby shapes. As a matter of fact, it is the only cut grading system that is identified by the scientific neighborhood.

Exactly what is even more, its Diamond High quality File uses an unique and proprietary 0 to 10 grading system to review the 4 Cs - a system which is simpler to comprehend than GIA's grading system. As a matter of fact, AGS also goes the extra step by corresponding their 0-10 score scale to various other types of ranking. For instance, the traditional VS1 diamond quality rating is a 3 on the AGS Ruby Top Quality Document.

Ruby Coverage - The Drawbacks

1. Ruby grading is not standardized or regulated and also for this reason you could encounter tier 2 labs that utilize looser standards to the rate 1 grading laboratories mentioned above. If you purchase a diamond that has actually been graded by a tier 2 laboratory, you may end up paying much more for a lesser quality diamond. So for instance, a ruby rated a "F" in shade at a rate 2 laboratory may obtain a G, H, or lower color score at a much more reputable laboratory. The industry also marks down diamonds graded by minimal known laboratories by about 15-30% or even more. So either you just get a diamond rated by a rate 1 laboratory or you approve that you may be getting a minimal high quality diamond than exactly what is mentioned on the report if that diamond is rated by a lower known lab.

2. Numerous big chain stores have big agreements with lower known laboratories with "softer" ruby grading standards. Several of these softer laboratories placed "recommended replacement worths" on the laboratory records - values which are greater than just what shops means offer the rubies for. So a sales representative in a store might say to you, "Check out the lot you are obtaining right here. We are selling you this diamond interaction ring for $2500 but the record states that the suggested replacement value is $4000." Wow - exactly what a bargain - NOT! This is why it is better that you trust only independent rate 1 labs.

Also bear in mind that reputable diamond rating reports are not appraisals as well as don't offer assessment figures. Diamond appraisals are usually blatantly filled with air as well as are not something you'll wish to depend on.

3. Ruby records are filled with disclaimers that define that nothing is "certified" or assured which the laboratories are not liable for mistakes. Actually, the GIA offers a please note of types on their internet site regarding the use of words "certify." The web site claims:

"It is wrong to state that pupils, graduates, their businesses, or particular gemstones are "certified" by GIA. The Gemological Institute of The U.S.A. does not license any person or anything. Neither a student neither a graduate who has been awarded a certificate or diploma, neither a treasure which has actually been rated or identified by GIA has been licensed by GIA".

So it is feasible that you the customer is left holding the bag should an error in a report is later on uncovered. Courts have actually often ruled that vendors, not laboratories, are in charge of such mistakes. Why? Due to the fact that the labs showed beforehand that their records could not be held accountable.

The good news is, there are a couple ways to offer yourself a lot more buyer protection:

A. You can fly to India where jewelers provide a lifetime buyback policy to their customers. Too expensive to fly?

B. You can discover one of the 20% people jewelers that sell fully bonded rubies. These are diamonds that are marketed with lifetime breakage, lifetime trade-in and also lifetime buyback plans.

C. Not as excellent a remedy as getting a completely adhered diamond yet you might get a diamond that comes with an actual "certificate" and not a report. "Qualified diamonds do have warranties" albeit for shorter durations.

Accreditation Some vendors refer to a "ruby report" as a "certified diamond" however practically this is not correct. From a lawful perspective, a diamond record is a simply an experienced viewpoint though in reality, aspects of a ruby grading report are not just point of views.

For example, a ruby's carat weight (weight) can be accurately determined in addition to its cut quality by gauging its optical effectiveness or by describing a computer model. A certificate on the other hand is a declaration of truth - a document for which the issuer approves legal obligation and will certainly make restitution to the consumer for errors.

Some leading ruby grading labs supply both reports and also certificates. AGS provides Ruby Top quality Records (non-certified reports) as well as Diamond High quality Certificates. Diamond High quality Certifications are prepared solely for AGS retail jewelry experts as well as provides warranties from taking part American Treasure Culture member stores.

GCAL licenses it's ruby grading likewise. Its 100% money-back guarantee plan is legitimate for a duration of two years from the day on the suitable certificate. This policy ensures the precision of the cut, shade and also quality grades as well as the carat weight.

A report or certification need to will have a number on it that could or could not be inscribed on a ruby. You will be able to get in that number on the web site of the accrediting laboratory to examine a report's legitimacy.

Elements Of A Ruby Grading Record Diamond grading reports are constantly advancing yet specific aspect needs to stay the same. For instance, the:

The Report #. This number is offered and also taped in a laboratory's document and might or could not be engraved on a diamond's band. You can get in the record number on a grading lab's site to check the authenticity of the ruby quality record or to obtain more information about the ruby. Forming & Facet Style: This is the overview and also the reducing style used for the aspect arrangement. There are 3 basic element designs - "great cut, action cut and combined cutting style" and also 12 basic shapes that include notables such as round brilliant and princess cut" diamonds.

Measurements: This refers to dimension (not weight) of a ruby. Dimension includes measurements such as length, size, weight as well as size. A dimension is commonly provided to the hundredth of a millimeter. Measurements play a huge duty in just how a diamond shines.

Carat weight Weight: The weight of a ruby is determined to the hundredth of a carat and also some also offer such step to the thousandth of a carat (1.123 ct.). Carat is the most unbiased and the easiest to comprehend of the 4Cs since all one has to do is weight the stone. Shade Quality: This informs you the level of shade lack in the diamond. The less color the greater the grade.

Diamonds are typically rated from D-Z; the closer to "D" the whiter the ruby. You must never ever see diamond shade range such as (G-H, I-J-K, and so on) on a ruby record. You should only see shade varieties on appraisals for stones that are mounted.

Clearness Grade: Virtually every diamond has actually inner flaws called incorporations and external blemishes called blemishes. A ruby is rated according to the size, type, place and amount of these problems.

Clearness qualities vary from Remarkable (FL) - Consisted Of. Labs use a pair experts to quality the clearness of a diamond in order to think of a much more accurate reading.

Cut Quality: Extra current ruby records include a cut quality for common round dazzling diamonds. Cut considers the sparkle, fire and scintillation of the ruby. Cut quality varies from Exceptional - Poor.

Various other elements you might come across on a diamond report consist of the gloss, proportion, fluorescence as well as proportion. Equipped with this information, you are much better able to make an evaluation of the high quality of diamond that is mounted in an engagement ring.

1 ct wedding band

How Do You Know If The Diamond Is Phony Or Actual Ruby?

University Place

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Vintage Wedding Rings in Washington