5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.
Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To begin our feature on different kinds of gemstones, we will begin with the very best and also most popular gemstone of them all the diamond. The ruby is the ultimate gems. It has extremely few weak points and also several strengths. It glows with its phenomenal worth as well as emotional value. It is utilized in wedding event rings to represent endless love or utilized as gifts/jewelry to be offered to enjoyed ones. But the ruby is a lot even more compared to its infinite appeal.
The diamond derives its name from the Greek work adamas implying unbeatable. In firmness, there is no comparison. The diamond prices in the Mohs range a 10 which is the hardest compound in the world. Its reducing resistance is 140 times that of the ruby and sapphire, the gemstones(Diamond) that are following in the Mohs scale in hardness. The ruby's optical residential or commercial properties such as luster as well as rigidity make it special and easily differentiated from various other imitations. Appreciate!
* Background of Diamonds
The initial tape-recorded ruby go back around 800 B.C. in India. Some believe it also went back 6,000 years back. The rubies were made use of as attractive objectives and additionally as talismans to prevent bad as well as offer protection in battle. Throughout the Dark Ages, rubies were also mentioned to be utilized as a medical help. Religious physicians even told clients that if they hold a ruby in a hand and also make the sign of the cross would certainly, it would certainly heal and also health problem and also heal wounds.
Rubies came to be more popular throughout the 19th century as a result of discovery of ruby down payments in South Africa. This discovery brings about boosted supply, enhanced reducing and polishing techniques, as well as growth in economic climate. In 1979, geologists discovered the Argyle pipe in Australia which to this day is the wealthiest ruby deposit in the world. Argyle, ever since, alone is in charge of supplying over one third of the world's diamonds each year.
* Diamonds: Just how are they created?
Diamonds contains an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Diamonds are created 90 miles under the Earth's surface area at temperature levels of regarding 2200 degrees Fahrenheit. Rubies are created deep within the earth and also at some point, over extremely lengthy durations of time, press their way to the earth's surface area, usually via volcanic eruptions.
The age of these diamonds from beneath the surface area of the earth are from 1 to 3.3 billion years old! When diamonds are created and start their climb to the earth's surface area, they experience channels where the lava from the volcano increases to the surface area, grabbing diamonds in the process as well as eventually depositing them externally, where they are at some point located and also extracted.
* The 4 C's of Diamonds
There are 4 unique features that establish the value as well as quality of a diamond. These are the color, cut, quality and also carat. Or else understood as the 4 C's of a ruby. In the complying with, we will discuss these features thoroughly.
In the last e-newsletter, we touch based on the color of gems as being one of the most essential function because of that shade is one of the most obvious attribute. The perfect diamond ought to show up clear and also colorless yet this is not the instance for all rubies. Rubies can can be found in any type of color of the rainbow most typical color is a shade of yellow or brownish. The Geological Institute of The U.S.A.(GIA) have created a standard to quality ruby color. This standard includes a text system that ranges from the alphabet D - Z. Please see listed below:
D E F No Shade G H I J Virtually Colorless K L M Faintly tinted, can't hardly be seen as well as generally yellow in shade N O P Q R Lightly tinted, generally yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins with yellow and proceeds to brown
The cut a diamond is figured out by the diamond's percentage such as its shape, width and also depth. The cut identifies exactly what is called the diamond's "sparkle". Also if the diamond itself has excellent color and clarity, with a bad cut the ruby will have a boring radiance. This is due to the fact that the cut identifies how light journeys within the diamond. The Gemological Institute of The U.S.A. has also created a clearness grading system to rank ruby clearness. This grading system consists of Remarkable (Fl), Inside Remarkable (IF), Really Extremely Slightly Included (VV1 or VV2), Really Slightly Included(VS1 or VS2), Somewhat Consisted Of(SI1 or SI2), and also Included(I1, I2, and I3). Although this system had actually been added to the diamond industry, it is not widely made use of. This is due to that it took a lot of technique as well as training to integrate it.
The cut a ruby is identified by the ruby's proportion such as its shape, size as well as deepness. The cut identifies exactly what is called the ruby's "sparkle". Also if the ruby itself has ideal shade and also clarity, with a bad cut the diamond will certainly have a dull radiance. This is since the cut figures out how light journeys within the ruby.
There are 3 types of cuts that could establish the diamond's radiance. These are a shallow cut, a cut that is as well deep and optimal cut. A shallow cut is a cut of a ruby that is too low, that light traveling via it is shed under of the rock and also does not come back into sight. This cut makes a ruby appear drab and dull. A cut that is unfathomable is a cut that is too expensive, that light taking a trip through it escapes with the sides as well as darkens the rock. An ideal cut is an excellent cut on a ruby that reflects light to the top of the rock, offering it best sparkle.
* Carat weight
As stated on the last e-newsletter, a single carat(ct) weighs concerning 200 milligrams or.2 grams. For smaller carat weight rubies that consider less than a carat, it is revealed as factors (pt). Factors are 1/100 of a carat. Carat weight of a ruby is necessary due to that larger rubies are rarer compared to smaller sized ones, so basically the larger the diamond the extra pricey it is. There is no common grading system or representation that can reveal different carat weight. This is due to the fact that there are a lot of variations of diamonds fit as well as cut, that makes rocks of comparable weight, look different.
* Replica Diamonds
Because rubies are one of the most useful and also rarest of all the gems, initiatives have actually been made to replicate or perhaps improve rubies using more economical alternatives. A great deal of times, straightforward errors have been made and also these choices or other gems such as spinel were often confused with genuine rubies. Sometimes, some deceitful people aim to market these choices to misfortunate buyers in order to earnings. Below we will go over concerning these choices and also methods to recognize them.
* Synthetic Diamonds
Synthetic rubies are diamonds that are expanded manufactured in a research laboratory. The initial recognized cases of diamond synthesis were asserted to be recorded in between 1879 - 1928, yet this was never ever verified. It wasn't until the 1940's where study began in the USA, Sweden, Soviet Union started researching. Artificial rubies are otherwise referred to as High Stress Heat (HPHT) rubies or Chemical Vapor Deposit (CVD) rubies. The name of both these synthetic rubies derives from the processes made use of to produce them. Several of these synthetic rubies could either have higher, minimal or comparable attributes compared to that of a diamond. Therefore, these artificial diamonds are used for abrasives, cutting and polishing devices, and also switches in power terminals.
Simulants are non-diamond substances that are used to reproduce the look and also also the form of a ruby. The most basic as well as well understood simulant is cubic zirconia (CZ). CZ at simple sight could sparkle greater than a diamond as well as it is much less dense, indicating that a 1 carat weight CZ will certainly be much larger compared to a 1 carat weight diamond. Nowadays, a much more popular simulant is moissanite, which has all the very same characteristics of a diamond. These qualities include hardness (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 and also ruby -2.42) as well as diffusion (Moissanite -.104 and ruby -.044). This makes it hard to separate the two at plain view as well as would usually need testers to tell the distinction. In the next section we will discuss the best ways to determine moissanites and also various other replicas.
* Real or Counterfeit?
An old method of determining diamonds is to do a scrape examination. This needs scratching a ruby with an additional ruby which is devastating and is seldom used nowadays. The best as well as most trusted way to check for rubies is to use testers that utilize thermal conductivity. These testers consist of battery powered thermistors mounted with a retracting copper tip. This tester works by injecting the warmth into the evaluated stone and afterwards the tool determines the amount of warm that it performs. However thermal conductivity testers functions best to distinguish rubies and its other simulants, it will not assist identify lab created or synthetic stones. To be able to determine these, particular optical strategies are needed. Laboratories utilize techniques such as spectroscopy, microscopy as well as luminescence in order to determine a particular stones beginning. The ordinary person can make use of loupes and microscopes to differentiate synthetic stones. All-natural rubies generally have small flaws as well as problems such as inclusions or some sort of international material, which will certainly not be located in synthetics.
Beginning With the Fundamentals When Intrigued in Acquiring Diamond Fashion Jewelry.
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.