Rose Gold Diamond in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

mens rose gold wedding rings

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To begin our attribute on various sorts of gemstones, we will start with the most effective and also most popular gems of them all the ruby. The diamond is the supreme gemstone. It has few weak points and many staminas. It glows with its phenomenal value and also sentimental worth. It is used in wedding celebration rings to represent countless love or made use of as gifts/jewelry to be offered to loved ones. However the diamond is a lot greater than its infinite appeal.

The ruby derives its name from the Greek work adamas indicating unequalled. In hardness, there is no comparison. The ruby prices in the Mohs range a 10 which is the hardest material in the world. Its reducing resistance is 140 times that of the ruby and sapphire, the gems(Diamond) that are following in the Mohs range in solidity. The ruby's optical residential or commercial properties such as gloss as well as rigidness make it unique and easily distinguished from other replicas. Take pleasure in!

* Background of Diamonds

The very first taped ruby go back around 800 B.C. in India. Some think it even dated back 6,000 years earlier. The rubies were used as decorative purposes and as talismans to ward off bad as well as supply security in fight. Throughout the Dark Ages, diamonds were even specified to be used as a clinical aid. Spiritual medical professionals even told patients that if they hold a diamond in a hand as well as make the indication of the cross would, it would heal and also health problem as well as heal wounds.

Rubies became extra preferred throughout the 19th century due to discovery of ruby down payments in South Africa. This discovery leads to raised supply, improved cutting and also brightening methods, and growth in economic situation. In 1979, geologists located the Argyle pipe in Australia which to this day is the wealthiest ruby down payment worldwide. Argyle, ever since, alone is in charge of providing over one third of the world's rubies every year.

* Diamonds: Exactly how are they formed?

Rubies contains an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Rubies are produced 90 miles under the Planet's surface at temperatures of concerning 2200 degrees Fahrenheit. Rubies are formed deep within the planet as well as at some point, over extremely lengthy durations of time, press their method to the planet's surface, typically via volcanic eruptions.

The age of these diamonds from below the surface of the planet are from 1 to 3.3 billion years of ages! When rubies are formed as well as begin their ascent to the planet's surface, they go through networks where the magma from the volcano climbs to the surface, grabbing diamonds in the process and ultimately depositing them externally, where they are ultimately located and also extracted.

* The 4 C's of Diamonds

There are four distinct characteristics that establish the worth as well as quality of a ruby. These are the shade, cut, clarity and also carat weight. Otherwise referred to as the 4 C's of a ruby. In the complying with, we will chat concerning these features in detail.

* Color

In the last e-newsletter, we touch based on the color of gems as being the most crucial attribute due to that color is the most evident function. The excellent ruby must appear clear and also anemic however this is not the situation for all rubies. Diamonds could can be found in any color of the rainbow most usual color is a shade of yellow or brownish. The Geological Institute of America(GIA) have designed a guideline to quality diamond shade. This standard contains a lettering system that varies from the alphabet D - Z. Please see listed below:

D E F No Color G H I J Nearly Anemic K L M Faintly colored, cannot rarely be seen and also normally yellow in color N O P Q R Gently tinted, usually yellow. Can be seen with the nude eye S T U V W X Y Z Tinted, starts from yellow and also progresses to brown

* Clearness

The cut a ruby is determined by the diamond's proportion such as its shape, width and deepness. The cut determines just what is called the diamond's "radiance". Also if the ruby itself has excellent color as well as clearness, with an inadequate cut the ruby will have a boring sparkle. This is since the cut establishes just how light travels within the ruby. The Gemological Institute of America has actually likewise developed a clearness grading system to rank ruby clearness. This grading system includes Remarkable (Fl), Internally Perfect (IF), Really Extremely A Little Included (VV1 or VV2), Really Slightly Included(VS1 or VS2), Slightly Consisted Of(SI1 or SI2), and Included(I1, I2, and also I3). Although this system had been added to the diamond industry, it is not extensively made use of. This results from the reality that it took a lot of method as well as training to integrate it.

* Cut

The cut a ruby is established by the diamond's proportion such as its shape, size and also deepness. The cut determines exactly what is called the ruby's "radiance". Also if the ruby itself has ideal shade as well as clarity, with an inadequate cut the ruby will have a boring radiance. This is because the cut figures out just how light travels within the diamond.

There are 3 sorts of cuts that can identify the ruby's brilliance. These are a shallow cut, a cut that is unfathomable as well as ideal cut. A shallow cut is a cut of a diamond that is also low, that light traveling via it is lost on the base of the rock and also does not come back right into sight. This cut makes a ruby show up drab as well as plain. A cut that is unfathomable is a cut that is too expensive, that light taking a trip via it escapes with the sides and darkens the stone. A perfect cut is a perfect cut on a diamond that shows light to the top of the stone, providing it excellent sparkle.

* Carat weight

As mentioned on the last e-newsletter, a solitary carat weight(ct) considers regarding 200 milligrams or.2 grams. For smaller sized carat weight rubies that consider much less than a carat, it is revealed as points (pt). Points are 1/100 of a carat. Carat weight of a diamond is necessary due to the truth that larger rubies are rarer compared to smaller ones, so essentially the larger the ruby the much more pricey it is. There is no basic grading system or representation that could show different carat weight. This is since there are many variants of rubies in form and also cut, that makes stones of comparable weight, look different.

* Imitation Diamonds

Since rubies are one of the most important and rarest of all the gems, efforts have been made to duplicate and even improve rubies using less pricey alternatives. A great deal of times, truthful errors have been made as well as these alternatives or other gems such as spinel were often confused with genuine rubies. Sometimes, some deceitful people attempt to sell these choices to misfortunate purchasers in order to revenue. Below we will certainly go over regarding these options and also ways to identify them.

* Artificial Diamonds

Synthetic diamonds are rubies that are expanded produced in a laboratory. The first well-known situations of ruby synthesis were declared to be documented in between 1879 - 1928, but this was never ever verified. It wasn't until the 1940's where study started in the USA, Sweden, Soviet Union started researching. Synthetic diamonds are or else known as High Pressure Heat (HPHT) rubies or Chemical Vapor Down Payment (CVD) diamonds. The name of both these synthetic diamonds obtains from the processes used to produce them. Several of these synthetic rubies can either have greater, minimal or comparable qualities compared to that of a diamond. For that reason, these synthetic diamonds are utilized for abrasives, cutting and also polishing tools, and changes in power plant.

* Simulants

Simulants are non-diamond materials that are made use of to reproduce the appearance as well as the shape of a ruby. One of the most fundamental and also popular simulant is cubic zirconia (CZ). CZ at plain sight can sparkle greater than a diamond as well as also it is less dense, suggesting that a 1 carat CZ will certainly be a lot larger compared to a 1 carat ruby. Nowadays, a much more popular simulant is moissanite, which has all the same features of a diamond. These qualities consist of hardness (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 as well as ruby -2.42) and dispersion (Moissanite -.104 and also ruby -.044). This makes it hard to differentiate the two at simple sight as well as would certainly usually require testers to discriminate. In the next area we will review how to determine moissanites as well as various other replicas.

* Actual or Counterfeit?

An old method of identifying rubies is to do a scrape test. This requires damaging a ruby with another diamond which is damaging as well as is hardly ever used nowadays. The most effective and most reputable means to evaluate for diamonds is to make use of testers that use thermal conductivity. These testers are composed of battery powered thermistors installed with a retractable copper suggestion. This tester works by injecting the heat onto the checked stone and afterwards the tool gauges the amount of warmth that it performs. However thermal conductivity testers works best to distinguish diamonds and also its various other simulants, it will certainly not assist distinguish lab developed or synthetic stones. To be able to determine these, specific optical methods are required. Laboratories use methods such as spectroscopy, microscopy as well as luminescence in order to establish a particular stones origin. The average individual can use loupes and microscopic lens to distinguish synthetic rocks. Natural diamonds typically have minor blemishes and flaws such as additions or some sort of international product, which will certainly not be located in synthetics.

white gold diamond chain

Acquiring Diamonds Online - Is This Online Jewelry Expert Right For You?

University Place

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Vintage Wedding Rings in Washington

Rose Gold Engagement Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

10 ct ring

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

princess cut diamond

The Big 4 Cs For Loose Diamonds

University Place

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Vintage Wedding Rings in Washington

Marriage Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

princess cut wedding rings

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Acquiring a diamond engagement ring is rather a worthy acquisition every man ought to be privileged enough to make. Some who do not truly know way too much about jewelry and diamonds could really feel as if they ought to just go to a store and also choose a ring which looks eye-catching to them. Although this may suffice, there are far better means to picking the very best feasible sort of diamond engagement ring for your enjoyed one. The adhering to will provide the top 10 tricks to buying a diamond interaction ring.

Look around

Maybe among the best tricks to keep in mind if you remember absolutely nothing else from this listing is to look around. Purchasing a ring of this type on an impulse will more than likely not lead you to the ideal offer or the very best diamond. As a result, take your time when purchasing an engagement ring, store around and also see what is around to be bought.

You Can Locate a Beautiful Ruby Engagement Ring for sale

You ought to additionally know that you have the ability to discover an exquisite ruby engagement ring with a desirable price connected to it. This is not to claim that you ought to limit your options just to sale products however constantly don't hesitate to peruse the sale counter when searching for an engagement ring to offer to your future fiancée. Do make certain that it is a genuine sale and also not one that runs all the time.

Dimension of the Diamond Really Doesn't Issue

An additional key when it pertains to acquiring an engagement diamond ring is that the carat size of the ruby is not truly just what matters when all is said and also done. Although some could think that a larger ruby equals a much better ruby this is typically not the instance as cut, shade and clarity all should be thought about in addition to the carat weight of the rock.

Buying Online Is a Choice

With today's technology, you could purchase nearly anything on the internet and also the very same is real for diamond interaction rings. For those that like the suggestion of an online acquisition, there are a lot of websites which use diamond rings available and may offer fairly a good deal as well. Just be particular to obtain documentation specifying real top quality of the ring. The on the internet organisation should have an One Month cash back guaranty without any questions asked.

Getting the Ring with Wedding Celebration Bands Could Conserve Loan

You may also locate that if you are in the market for not only an engagement ring however wedding event bands also, acquiring all of these things together can save you cash. Specific ring developers will generate engagement rings with matching wedding event bands which you can purchase as a set.

White Gold Resembles Platinum Yet Is Cheaper

If your enjoyed one likes silver-tone fashion jewelry however you are not able to manage a platinum diamond interaction ring, take into consideration purchasing one made of white gold. White gold is an excellent choice as it appears like platinum yet is a lot cheaper.

Fashion Jewelry Retailers Usually Have One or Two Sales Throughout The Year

One more secret to purchasing a ruby involvement ring is that several jewelry sellers provide sales throughout the year. Some are holiday sales whereas others are a way for the fashion jewelry shop to obtain eliminate the old inventory to make space for new items coming right into the store.

Purchasing the Diamond and Setting Separately Can Save Money

You may likewise find that getting the ruby and also establishing separate from each other can save you some loan. It additionally permits you to choose exactly the kind of ring that you desire as well as have the ability to see it prior to the stone is set.

Purchasing a Small Carat Size with Baguettes Is In Some Cases a Better Deal

If you are looking for a diamond involvement ring with a whole lot of sparkle but you are incapable to afford a big carat weight diamond, consider acquiring a smaller sized ruby yet include baguettes to the ring. This will include glimmer and sparkle and not set you back as much as a bigger ruby might cost.

Consider Tiny Fashion Jewelry Shops Which Deal Personalized Solution

For those who are looking for a fashion jewelry shop which will certainly give personalized solution, you may wish to buy the diamond engagement ring for your liked one at a tiny fashion jewelry store. These fashion jewelry shops are usually run by the specific proprietor that will certainly do whatever possible to make your engagement ring buying journey incredible.

rose gold morganite halo engagement ring

Exactly How to Get Diamonds When Getting Wholesale.

University Place

You have actually been dating the individual of your desires for rather a long time currently. You might or may not be staying with each other as a pair, either of both has its very own relationship issues; if you do not live as a pair, the sensation of isolation that surges with your heart whenever your companion says the words "great bye" after a beautiful day well invested together influences you to do even more and every single time you turn incorrectly to share with him or her your sensations, the vacant space that greets you, swiftly turns your ideas to do even more into a resolve to do more currently! For those that have actually taken their connections an action additionally by relocating in with each other.

As a result of the isolation really felt each time a partner says great bye, various types of pressures and sensations established in they can be the should make your love official for the whole world to see or you both wish to begin a steady family. Whatever motivates you right into lastly making the very first action to the most important dedication you would certainly ever before make in your whole life may not be off relevance yet the icon which you should give while taking this action is of the utmost importance - "The Involvement Ring".

Today buying an involvement ring has currently become the status of determining yourself as one who is already taken and prepared for marriage yet have you ever before had fun with the rock or band on your hand and also thought concerning its background? Since it's not specified in the scriptures or the oldest records that provide detailed accounts of techniques before marital relationship in time passed.

The prominent involvement ring of the modern age had its beginning as current as the 19th century and also wasn't constantly a symbol of undying love, it was essentially the initial part repayment of the new bride rate to be paid to the new bride's household however turned over and put on by the bride. It was a type of insurance coverage offered for the female, in situation the possible partner which was always the man back then disbands the marriage therefore endangering the female's virtue and charm to other men.

Real significance and also icon of the involvement ring began shining via in the 20th century, when guys gave their fiancées a band that symbolized their love and purposes for a marriage union, the involvement ring signified that she had been taken, from limitations as well as ready to be married to her true love as well as it was positioned on the fourth finger of the left hand, for that finger was believed to have a blood vessel going through it which came straight from the heart for that reason signifying the finger as a "heart finger". Earlier rings could simply be a piece of silver or an iron band with no adornment, which the woman inserts into her 4th finger on her left hand, this was the practice for a short time till industrial rings as well as the media took over the interaction scene. The Adverts revealed on engagement rings in the center of the 19th century suggested that males should invest no much less compared to 2 months of their month-to-month revenue to purchase the ideal ring for his precious bride-to-be to be and just with an advert the interpretation and style of the engagement ring took a new direction. The contemporary involvement ring is a sign that shows that a person is involved to be married snappy. The cut, pricing and also make of the interaction ring although not very important, adds a certain flavour to your engagement day or ceremony and also has actually spurned a brand-new jewellery market all by itself. The Engagement ring now is available in various styles; it might be a band made of precious products such as Gold, Platinum or Silver or maybe a band tied with gem rocks to provide an irresistible beauty to the ring. The various major designs of engagement rings shall be talked about below.

Different Types of Involvement Rings

Jewelry rings; these are the essential classic interaction rings, the jewelry ring consists of a band as well as a gem stone; the band might be made from any kind of product of your option varying from gold to platinum while the gemstone ought to also be decided to fit your strange attributes, it could be diamonds or sapphire cut in different means that would certainly be explained below.

Engagement Rings with Side stones: These elegant rings are made with gems put right into the sides of the band, which could be constructed from any type of metal product depending on your preference. Some side rocks call additionally featured a main rock at the middle. The popular gems used for this design of rings are typically rubies yet you could personally tailor your gems to the preference of your love.

The 3 Rock Rings or the Trinity ring: this is a ring layout with its very own charming background, it is thought that each rock in the three stone ring represents the past, existing as well as future of the time in which a couple has invested together and also the ring would bind them together for all infinity. The ring design is that of an immaculate platinum band with 3 elegant gems; one at the middle with two location purposefully by the sides. The gemstones are normally crazy of diamonds however you are permitted to tailor your own right into 3 different sorts of gems if you so need.

The Matching Bridal Set: this is a stunning mix of both the interaction ring and the real wedding event band, there is no collection style on how a matching bridal collection ought to look like yet it is normally excellent to have either the interaction ring or the wedding celebration ring emphasizing the various other as well as the other way around I.e. a beautiful platinum engagement ring with a gemstone need to be coupled with a basic Gold timeless wedding event band, supplying the bride-to-be with a touch of colour. Stress Rings: let the name not function as an obstacle to you when taking into consideration the tension ring for it is one of those layouts we call straightforward however forever classy, it contains a band made from any product of your option, firmly holding a gemstone in its grasp with stress i.e. the gemstone is not held by prongs but squeezed in between both sides of the band material you selected. The band material offers as its holding assistance. It is very recommended you go for 2 contrasting colours for the band and also the gems to highlight the real beauty of the stress ring.

The Different Cuts of Gemstones

The Padding cut: this technique of reducing a gems, provides the rock a traditional form that is in between a rectangular shape and an oval, it is among one of the most preferred jewellery cuts and it's additionally called the antique cut.

The Marquise cut: the approach utilized in reducing the form of the marquise cut offers the gemstone an oval shape in the center with ends. This ring has a traditional elven or should I state earthy appearance that brings out the supernatural charm in your bride-to-be.

The Emerald cut: the emerald treasure naturally has its very own specified shape and this cut method clearly mirrors it, the emerald cut is a rectangular cut with chopped corners protruding at its 4 ends.

The Asscher cut: this approach of reducing the gemstone provides it a shape individuals state resembles the emerald rectangular shape but it is a lot more octagonal fit than rectangular shape, the octagonal shape assists it capture light and also show it in different instructions. It's a perfectly stunning cut for a rings gemstone.

The Princess cut: this is just one of the most previously owned cuts on gems, it is square fit and also aids bring out the beauty of the gemstone used fairly demurely. The Round cut: this cut basic looks round yet its more than that for it has different spikes included to its surfaces making it one of, if not one of the most shining gemstone cut of the whole lot, it is understood amongst females for its capability to blind the eye (shimmer).

The Heart cut: excellent for the romantics at heart as well as formed to stubborn belly their hearts, it is a simple as well as sophisticated cut that is rather prominent among ladies. After providing a basic expose on interaction ring designs and cuts, the next action is to offer your notice the leaders in the market that gives you with the very best and also most costly rings- sometimes- around.

Costs Barnes: the producers of several of the most charming and costly involvement bands available. Tiffany: everyone knows the name Tiffany this designer home additionally provides customers with top of the range rings as well as costs delay. Tacori: the Tacori style is likewise among one of the most demanded engagement rings in the jewellery industry the cut and plan of its layouts are always a pleasure to witness.

In picking a ring your budget plan must additionally enter play so either you acquire Tiffany's or an ordinary involvement ring, it's the idea that counts.

___________________________________________

Vintage Wedding Rings in Washington

Jewelers in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

round engagement rings

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

eternity ring

What You Should Know When Acquiring a Ruby Ring

University Place

How are ruby cut qualities designated?

This is where points begin to obtain made complex. The approaches made use of to quantitatively analyze the top quality of a cut vary. The means the GIA determines just what a ruby's cut grade must be, for example, varies in extremely specific methods from the way other certifiers like the AGS do it. Most of the times, these organizations do not disclose the exact information of the processes they use.

The shape of a diamond also makes a difference relative to exactly how its cut quality is established. Although there are some basic standards that remain the same for any type of kind of ruby, the specific approaches made use of to grade a round ruby's cut are various from those utilized to quality a heart-shaped diamond's cut.

The remainder of this explanation will certainly focus on rounded diamonds, as this is by far one of the most common diamond shape. One of the elements impacting the cut grade of a round diamond is the variety of aspects it has. Aspects are the flat, specified areas externally of a ruby. The elements on round diamonds are usually triangular. Currently, it's believed that the perfect round ruby need to have 33 aspects on the crown (the section of the diamond that rests over the band, which itself is the widest point of the diamond) as well as 25 on the structure (the lower, longer area of the diamond). When there are flaws externally of the diamond, cutters might include added aspects in order to obscure them. This results in a deterioration in the general quality of the cut.

While the facet matter is generally set as a great way of evaluating the top quality of a diamond cut, there are other factors on which gemologists regularly differ. A few of the various other factors utilized by some authorities in order to help identify cut grades include the elevation of the ruby's crown, the deepness of the structure, the diameter of the table (the top of the crown), as well as the angles of the crown and also structure.

The American Criterion standard for round diamonds requires a crown height of 16.2%, pavilion depth of 43.1%, as well as table size of 53% of the total girdle size. The Perfect Great criteria, however, requires 19.2% crown elevation, 40% structure deepness, and also 56.5% table diameter. While these distinctions could be difficult for amateurs to determine, they are a good picture of the problems related to producing a basic evaluation of a diamond's cut.

Although there are some arguments as to the precise percentages that make up the best diamond cut, for prospective ruby customers, the most crucial thing to recognize is that ruby accreditations offered by organizations like the AGS as well as GIA are trustworthy and significant. Reputable ruby vendors base the costs at which they buy and market rubies on the cut in addition to the remainder of the "4 Cs." When you acquire a diamond, you don't need to worry concerning the perception of exactly what makes a good ruby cut changing so a lot that the value of your diamond will be dramatically impacted.

Which ruby reduced grade represents the most effective worth?

Which kind of diamond is best for you largely depends upon your budget plan. For customers that are prepared to purchase them, vendors typically advise diamonds with the greatest feasible cut grades. Nevertheless, this could be due to some self-interest on their component.

The various other 3 Cs have an influence on ruby rates also, so it could be difficult to determine the exact distinction in rate between a Suitable or Exceptional cut diamond and an Excellent cut. For laid-back purchasers and budget-conscious investors alike, rubies with a Great or Excellent cut grade could stand for a superb worth. This is because, while they can be a lot more cost effective than otherwise comparable Ideal or Excellent cut rubies, the visible distinction in top quality is very little.

At the very same time, don't hesitate to utilize your discretion. If, for example, you find a ruby with a Suitable cut ranking which has great rankings in the other categories and also is still within your budget plan, after that you ought to certainly consider it, as long as you're taking care of a reliable vendor.

___________________________________________

Vintage Wedding Rings in Washington