Three Stone Round Diamond Ring Settings in Clearlake

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Clearlake, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Clearlake, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Clearlake. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Clearlake to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Clearlake for you engagement or wedding.

diamond rings

Clearlake How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Not all vendors give ruby grading laboratory records (aka ruby high quality reports) to their customers. So my general suggestions to you is to keep your money in your pocket when taking care of such jewelry experts.

Only acquire a diamond interaction ring if it features the initial ruby top quality report.

A lab record is an independent evaluation of the 4Cs of a loosened diamond and also consists of a plotted layout of the stone's clearness features and a visuals representation of the stone's proportions. Having such a record allows you to compare rubies of different top qualities and also inevitably assists you make an even more educated acquiring decision.

A retailer may cut edges as well as not provide a lab report or a dishonest seller could provide a fake one due to the moment, problem as well as expenditure he'll bear to obtaining a stone rated.

Yeah - there is a price for rating a diamond (though that cost is ultimately paid by the consumer), plus the delivery as well as insurance coverage costs for sending out the ruby to the laboratory. And also let us not fail to remember the opportunity cost of a jeweler not having the ruby in his shop available for sale for a few weeks while the grading occurs.

Nevertheless, a ruby grading record may likewise not be readily available since the expenses to obtaining one may affect also greatly on the last price of the ring. For example, a 0.3 ct ruby ring costing $250 say, may cost around $75 to be rated as well as have the report number inscribed on the band on the diamond. As you look for that suitable diamond interaction ring for your sweetheart, you'll discover that there is a hodgepodge of laboratories asserting to provide trustworthy ruby rating records. However I would only put my cash on ...

The Premier Ruby Grading Laboratory Information

Yes, all diamond quality reports are not developed equal. Within the industry, it is a consensus that the 2 top laboratories are GIA-GTL (Gemological Institute of The U.S.A.'s Gem Profession Laboratory) and also the AGS (American Treasure Society Laboratories).

The GCAL (Gem Certification and Assurance Lab) also provides extremely concerned reports or "ruby certificates" as they are described by GCAL. The GIA has the strongest global credibility for self-reliance and also uniformity. As a result of their consistent shade and also clarity strictness standards, the globe's largest and also most pricey rubies have actually been sent out there for rating years. In 2006, GIA-GTL added a two-dimensional cut grading system for round dazzling rubies.

AGS uses the most strict cut standards in the industry. It makes use of a three-dimensional light performance metric that could quality several ruby forms. In fact, it is the only cut grading system that is identified by the clinical community.

Just what is more, its Diamond Top quality Paper utilizes a distinct and also exclusive 0 to 10 grading system to examine the 4 Cs - a system which is less complicated to understand compared to GIA's grading system. In fact, AGS even goes the extra action by corresponding their 0-10 rating range to other kinds of rating. For example, the traditional VS1 ruby clearness score is a 3 on the AGS Diamond Quality Paper.

Diamond Reporting - The Drawbacks

1. Diamond grading is not standardized or controlled and also therefore you may find tier 2 labs that employ looser guidelines to the rate 1 grading labs mentioned over. If you buy a ruby that has been rated by a tier 2 laboratory, you might wind up paying much more for a minimal quality ruby. So for instance, a diamond rated a "F" in color at a tier 2 laboratory may get a G, H, or reduced shade ranking at an extra credible laboratory. The industry also discounts diamonds rated by lower well-known labs by regarding 15-30% or even more. So either you only acquire a diamond rated by a tier 1 lab or you accept that you could be purchasing a lower top quality ruby compared to just what is specified on the record if that diamond is graded by a lesser well-known laboratory.

2. Many big chain shops have huge contracts with minimal known labs with "softer" ruby grading standards. Several of these softer labs placed "suggested substitute values" on the lab reports - worths which are higher than what stores means market the rubies for. So a sales representative in a store could state to you, "Look at the lot you are getting here. We are selling you this diamond involvement ring for $2500 but the report says that the recommended replacement value is $4000." Wow - exactly what an offer - NOT! This is why it is better that you trust only independent tier 1 laboratories.

Also bear in mind that respectable diamond grading reports are not evaluations and don't provide evaluation figures. Diamond assessments are typically blatantly inflated as well as are not something you'll wish to depend on.

3. Diamond reports are filled with please notes that define that absolutely nothing is "certified" or guaranteed which the labs are not responsible for errors. Actually, the GIA offers a disclaimer of sorts on their site regarding making use of the word "accredit." The website says:

"It is inaccurate to state that trainees, grads, their companies, or certain gems are "certified" by GIA. The Gemological Institute of The U.S.A. does not license any person or anything. Neither a pupil neither a grad who has been granted a certification or diploma, nor a treasure which has actually been rated or identified by GIA has actually been accredited by GIA".

So it is feasible that you the customer is left holding the bag ought to a mistake in a record is later found. Courts have actually frequently ruled that sellers, not laboratories, are responsible for such errors. Why? Because the laboratories showed ahead of time that their records couldn't be held responsible.

Thankfully, there are a couple methods to provide on your own more buyer defense:

A. You can fly to India where jewelers provide a life time buyback plan to their clients. Too expensive to fly?

B. You could discover among the 20% of United States jewelry experts who market totally bonded rubies. These are diamonds that are offered with lifetime damage, life time trade-in and also lifetime buyback plans.

C. Not as excellent a treatment as buying a totally bonded diamond but you could buy a ruby that includes an actual "certification" and not a record. "Qualified diamonds do come with guaranties" albeit for much shorter durations.

Certification Some vendors refer to a "ruby report" as a "certified diamond" however technically this is not correct. From a lawful standpoint, a diamond record is a just an expert viewpoint though in truth, elements of a diamond grading report are not simply point of views.

For instance, a ruby's carat (weight) can be accurately established in addition to its cut grade by determining its optical performance or by referring to a computer system version. A certificate on the various other hand is a declaration of reality - a document for which the issuer accepts legal responsibility and also will certainly make restitution to the consumer for blunders.

Some leading diamond grading laboratories provide both reports as well as certificates. AGS provides Diamond High quality Papers (non-certified records) and Diamond Quality Certificates. Ruby Top quality Certifications are prepared exclusively for AGS retail jewelers and also supplies guaranties from participating American Gem Society member shops.

GCAL certifies it's ruby grading likewise. Its 100% money-back assurance plan stands for a period of 2 years from the date on the suitable certificate. This policy guarantees the precision of the cut, color and clarity grades and the carat weight.

A report or certification ought to will certainly have a number on it that could or might not be etched on a diamond. You will have the ability to go into that number on the site of the accrediting lab to inspect a report's legitimacy.

Aspects Of A Diamond Grading Record Ruby grading reports are constantly evolving however certain aspect ought to remain the exact same. As an example, the:

The Record #. This number is offered and also taped in a lab's record and may or may not be etched on a diamond's band. You could get in the report number on a grading laboratory's web site to inspect the authenticity of the ruby quality report or to get more information concerning the diamond. Shape & Facet Design: This is the summary and also the reducing design utilized for the element arrangement. There are 3 basic facet designs - "dazzling cut, step cut as well as combined reducing style" and also 12 basic forms that include notables such as rounded brilliant and also princess cut" rubies.

Measurements: This describes dimension (not weight) of a diamond. Dimension includes dimensions such as length, size, weight as well as diameter. A measurement is generally listed to the hundredth of a millimeter. Dimensions play a massive function in just how a diamond shines.

Carat Weight: The weight of a ruby is gauged to the hundredth of a carat and also some also give such action to the thousandth of a carat (1.123 ct.). Carat weight is one of the most objective as well as the simplest to recognize of the 4Cs since all one needs to do is weight the stone. Color Grade: This tells you the level of color absence in the diamond. The less color the greater the quality.

Rubies are typically rated from D-Z; the closer to "D" the whiter the diamond. You ought to never see diamond shade variety such as (G-H, I-J-K, as well as so on) on a diamond record. You should just see color varieties on assessments for stones that are placed.

Clarity Quality: Virtually every diamond has actually interior blemishes called additions and exterior blemishes called imperfections. A diamond is graded inning accordance with the size, kind, location and also amount of these imperfections.

Quality grades vary from Remarkable (FL) - Included. Labs use a pair professionals to grade the clearness of a ruby in order to generate a more exact analysis.

Cut Quality: More current diamond records consist of a cut grade for conventional round dazzling diamonds. Cut thinks about the radiance, fire as well as scintillation of the ruby. Cut grade varies from Exceptional - Poor.

Various other components you could come across on a ruby record include the polish, proportion, fluorescence as well as proportion. Equipped with this info, you are much better able to earn an evaluation of the high quality of ruby that is mounted in an interaction ring.

3 stone halo engagement ring

How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Clearlake

Just how are ruby cut qualities designated?

This is where points start to get made complex. The techniques used to quantitatively examine the quality of a cut differ. The way the GIA determines exactly what a diamond's cut quality need to be, for example, varies in very specific methods from the method other certifiers like the AGS do it. Most of the times, these companies do not disclose the exact information of the processes they make use of.

The shape of a ruby also makes a difference with regard to exactly how its cut grade is determined. Although there are some standard requirements that remain the very same for any kind of kind of diamond, the specific techniques made use of to grade a round ruby's cut are different from those utilized to quality a heart-shaped ruby's cut.

The rest of this description will focus on round diamonds, as this is without a doubt one of the most typical ruby form. Among the factors influencing the cut grade of a rounded diamond is the variety of elements it has. Aspects are the flat, specified locations externally of a diamond. The aspects on round diamonds are generally triangular. Presently, it's assumed that the suitable round diamond ought to have 33 aspects on the crown (the section of the ruby that rests over the girdle, which itself is the largest point of the ruby) and 25 on the pavilion (the reduced, much longer section of the diamond). When there are blemishes on the surface area of the diamond, cutters could add additional aspects in order to obscure them. This causes a deterioration in the total high quality of the cut.

While the aspect matter is normally agreed upon as a great way of evaluating the high quality of a diamond cut, there are other points on which jewelers regularly disagree. A few of the various other aspects used by some authorities to assist identify cut qualities include the height of the diamond's crown, the depth of the pavilion, the diameter of the table (the top of the crown), and the angles of the crown and pavilion.

The American Standard benchmark for rounded diamonds calls for a crown elevation of 16.2%, structure deepness of 43.1%, as well as table size of 53% of the total band diameter. The Ideal Dazzling standard, however, asks for 19.2% crown elevation, 40% structure depth, and 56.5% table size. While these distinctions might be challenging for amateurs to discern, they are a good picture of the problems related to creating a basic analysis of a ruby's cut.

Although there are some disagreements regarding the exact percentages that make up the best ruby cut, for prospective ruby customers, the most essential thing to understand is that ruby certifications supplied by organizations like the AGS as well as GIA are trustworthy and also purposeful. Credible diamond suppliers base the prices at which they deal rubies on the cut along with the rest of the "four Cs." When you acquire a diamond, you don't need to fret regarding the perception of what makes an excellent ruby cut changing so much that the value of your diamond will certainly be significantly affected.

Which diamond cut quality represents the finest worth?

Which kind of diamond is best for you mostly depends upon your spending plan. For buyers that want to acquire them, suppliers normally suggest diamonds with the greatest possible cut qualities. Nevertheless, this might result from some self-involvement on their component.

The other 3 Cs have an effect on diamond prices also, so it could be hard to gauge the specific difference in rate between a Perfect or Excellent cut diamond and a Great cut. For informal buyers and also budget-conscious capitalists alike, diamonds with a Really Good or Excellent cut quality can stand for an excellent worth. This is because, while they can be much more affordable compared to otherwise equivalent Ideal or Excellent cut diamonds, the visible distinction in high quality is marginal.

At the exact same time, really feel totally free to use your discretion. If, for example, you find a ruby with a Perfect reduced rating which has excellent scores in the various other categories and also is still within your budget, after that you ought to certainly consider it, as long as you're dealing with a reliable supplier.

___________________________________________

Vintage Wedding Rings in Washington

Sapphire Rings in Clearlake

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Clearlake, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Clearlake, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Clearlake. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Clearlake to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Clearlake for you engagement or wedding.

opal engagement rings

Clearlake How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

3 stone sapphire ring

What You Need To Know When Buying a Diamond Ring

Clearlake

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

___________________________________________

Vintage Wedding Rings in Washington