Sapphire Rings in Buckingham

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Buckingham, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Buckingham, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Buckingham. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Buckingham to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Buckingham for you engagement or wedding.

black diamond engagement rings

Buckingham How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

4 ct ring

The Big 4 Cs For Loose Diamonds

Buckingham

There are a variety of styles of interaction rings of 2018 that are extremely fashionable. Every little thing from lead diamond rings and also tinted stones to "eco-friendly" rings as well as channel set ruby rings ended up being popular in 2018.

Lead ruby rings are rings with three or four rows of little, even-sized diamonds that typically walk around the entire ring. A bigger facility rock established over the remainder of the ring completes the appearance. Pave ruby involvement rings are just one of the finest involvement rings of 2018 due to the fact that they are a sophisticated option for an engagement ring while developing a great deal of glimmer on a future bride's third finger. You'll likewise find lead ruby wedding bands that match your interaction ring as well as make it much more sparkly.

Colored rocks have also grown in appeal. Due to this, rings with tinted rubies are amongst the very best engagement rings of 2018. Diamonds come in a variety of shades, consisting of yellow, blue, pink, or even black. Real tinted diamonds are incredibly unusual, makings them very costly. A one-carat colored diamond could run upwards of ten thousand dollars. However, if you can not manage to spend this much money on an engagement ring, there are a number of alternatives that will still allow you to be trendy with a tinted rock. With the most up to date innovation, you could purchase a manufactured tinted ruby. With the developments that have been made, many people could not inform the distinction between a mined ruby and also a man-made one. If you purchase or commission a synthetic ruby, you could choose whichever color you prefer, as well as conserve numerous thousands of bucks in the meanwhile. Conversely, if you want a colored rock yet don't require a diamond, emeralds, sapphires, and rubies make terrific alternatives for engagement rings as well as are much less costly than extracted tinted diamonds.

Environment-friendly interaction rings are additionally among the most effective interaction rings of 2018. With even more people worried regarding the atmosphere as well as regarding the human legal rights issues that border typical ruby mining, more people are looking for alternatives to traditional interaction rings. One possibility is to get an interaction ring that has a ruby that was extracted in Canada as opposed to South Africa. Canada does not have the same human legal rights concerns focusing on its diamond market, so it's considered to be extra pleasant to the world. Additionally, acquiring a manufactured diamond ring is likewise taken into consideration to be a lot more "green" since not just does it not have the very same civils rights issues that mined rubies do, but it does not damage the earth like mining for diamonds tends to do. Conversely, the ideal involvement rings of 2018 consist of antique engagement rings because the greenest engagement rings are those that are reused and also recycled. By acquiring an involvement ring that is antique, you are not adding to the new ruby ring market or the damage of the atmosphere.

Channel established ruby rings are likewise on the listing of best interaction rings of 2018. Channel collection engagement rings have the stones set within the band of the ring, so the top of the stone is despite having the top of the ring. Network established rings are especially optimal because the diamonds are shielded from being harmed because you could not reach the rock to chip them. Much more popular are network set ruby rings constructed of platinum, which has recently expanded in popularity. If you desire to acquire a ring that is a lot more special, however, you could have a channel collection interaction ring set with rocks aside from rubies. Sapphires are a specifically preferred selection for engagement rings.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Antique Wedding Rings in Buckingham

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Buckingham, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Buckingham, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Buckingham. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Buckingham to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Buckingham for you engagement or wedding.

eternity ring

Buckingham How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Diamonds are naturally readily available in a really wide variety of colors. The majority of people understand about anemic diamonds as well as GIA's shade grading system that is utilized to categorize a ruby's body color ... you understand D, E, F, and so on. This color grading system is only used to classify the most typical diamond body shade of yellow nonetheless anytime a ruby is located in another shade like pink, blue, green, and so on; then this ruby is described as a "" elegant ruby"".

All-natural Fancy rubies could be very expensive and also often times more costly than a comparable dimension anemic diamond. A really great example of a Fancy diamond is the notorious 45.52 carat weight elegant deep blue diamond, the Hope Ruby, which is on screen in the Smithsonian Nature Museum in Washington, DC.

A color boosted ruby is a 100% all-natural diamond that has had its shade transformed. And finest of all, shade boosted diamonds been available in an extremely wide option of shades at very inexpensive costs!

A little bit of history- For several, several years it has been well recognized that a diamond's color can be "" enhanced"" by placing a little bit of tinted compound externally of a ruby and similar to magic ... a diamond that had a recognizable yellow-colored shade would certainly transform to an extra appealing near anemic diamond. However, this type of color enhanced ruby can alter back to its original body color if this colored material was accidentally gotten rid of. In more current years, the technology of color enhanced diamonds has actually gone extremely advanced. It is currently feasible to totally change the shade of a diamond! These processes are thought about permanent due to the fact that it does continue to be steady when subjected to everyday regular problems. The shade will certainly not discolor if subjected to sunlight or be cleaned off by extreme chemicals.

How is it done? The preferred outcome of any of these treatments is to have an extra marketable ruby. A much less marketable diamond would be a ruby that has a low body color or often a reduced clarity. The color enhanced diamond treatment firms recognize if they start off with a specific kind of ruby as well as procedure it for a specific amount of time that they should finish up with a particular shade but it does not always work by doing this. This is a scientific research that does need some art in their processes ... the only procedure that gives regular results is the covering process.

The three procedures are as follows- Refine # 1- HPHT Color Boosted Diamonds- High Stress/ Heat (HPHT) treatment could enhance the color of specific kinds of brownish diamonds as well as hence raise their value. General Electric has developed a process that virtually is a mechanical simulation of a diamond's development in nature. The color boosted ruby will certainly be warmed up to an extremely heat under a really high, stabilized stress. Mistakes in the crystal structure are then repositioned resulting in a change of the ruby's color. Due to the fact that the problems of HPHT are extremely just like diamond's initial formation, just a well furnished lab will certainly have the ability to favorably recognize this sort of shade improved diamond. HPHT was initially used to transform yellow-colored diamonds into more marketable fancy colored improved diamonds, yet currently it is likewise made use of to transform some out of favor brown rubies into better anemic tinted improved diamonds.

Process # 2- Irradiated Color Boosted Diamonds- OK ... do not start getting all excited because you saw the word irradiated! This is a 100% safe procedure that is really much like exactly what is used to maintain food by exposing it to a stream of Gamma rays. The shade boosted ruby process is done in a number of different ways however the outcomes are all the exact same. You start with a low shade (P, Q, R, etc.) 100% natural diamond that has actually already been reduced as well as polished, after that it is revealed to a stream of quick electrons. During this part of the procedure the ruby will count on a really dark color due to the fact that a few of the atoms in the diamond's crystal framework have actually now been disjointed and this consequently has influenced the method light travel through the diamond. Next the ruby undergoes a regulated home heating (annealing) procedure, this permits some of those atoms to relocate (partly repaired) in order to get a wanted shade.

Refine # 3- Covered Shade Boosted Diamonds- The coating on refined rubies refers to a thin synthetic layer that modifies the shade of the ruby. The finish can either be of the desired color or can trigger a colored interference-effect. Unfortunately often this process is done to trick a purchaser. It is a reasonably easy process to do, it has actually been around for numerous years (although the layers products are better now), and it does not need a great deal of pricey high technology devices. Lately, I have actually seen some pink coated rubies on the marketplace, they are very appealing ... and also certainly you would have to purchase them recognizing that they have been covered as well as follow your jewelry expert's standards about possessing and also looking after these color boosted rubies. The finish could be applied to the whole of a ruby's surface area, simply the bottom of the diamond, or to a slim zone near the band. A well-applied layer can alter the shade by several color quality. Some finishes could be eliminated via steaming in acid, strong cleansing options, or even home chemicals. Sometimes dots or bigger locations of purple or blue ink are painted on the ruby in order to help combat a yellow-colored shade. The diamond's setting will generally cover the dots, so they are difficult to see in an installed rock.

So, is a shade improved ruby right for you? Possibly ... all-natural expensive color rubies could be gorgeous but they are pricey! Color enhanced rubies are inexpensive and allow many individuals to own a brilliantly colored ruby. Ask your regional jewelry expert if they have any Fancy rubies ... either natural or shade enhanced diamonds. It is always fascinating, and also fun, to consider something different!

Under normal wear the irradiated as well as HPHT color enhanced diamonds will have no issues of the shade fading away. The only factor to consider will certainly be when you require to have any sort of service done on the piece of jewelry. If this kind of color improved diamond is revealed to excessive quantities of warmth it might impact the shade. The jewelry expert will require to understand that the diamond is a shade boosted ruby prior to any kind of work is done and also then the jewelry expert will be able to pick the very best strategy. Color enhanced rubies are currently additionally made use of as the tiny accent rubies around a bigger colorless diamond. There are many amazing items of precious jewelry offered with little blue, yellow, black, or green color enhanced rubies.

Since you find out about shade boosted diamonds and also someone aims to sell you on just what they call a natural expensive tinted ruby but it goes to an incredibly deal cost ... you will know that something simply does not sound right concerning the deal. A report from a respected grading laboratory need to come with all natural Fancy tinted diamonds that are marketed as natural. If you take care of a respectable company and you have been comforted regarding exactly what you are buying, after that you will certainly decrease the opportunity of something poor occurring to you. As with any type of situation involving a costly purchase of something that not numerous people are experienceded in, education should be an important part of your strategy. This is a lot more crucial if you intend to buy a shade improved ruby. Bud Boland has remained in the fashion jewelry business for 40 years and has done every little thing from watchmaking, diamond setting, jewelry production, as well as has actually been a Gemologist for virtually 35 years. He is a Grad Gemologist from GIA (Gemological Institute of America), which is additionally the place where he was a Teacher. He has educated about rubies to hundreds of trainees from all around the globe

1 ct tw earrings

Just how Do You Know If The Diamond Is Phony Or Actual Ruby?

Buckingham

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Opal Engagement Rings in Buckingham

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Buckingham, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Buckingham, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Buckingham. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Buckingham to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Buckingham for you engagement or wedding.

3 stone halo engagement ring

Buckingham How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

opal engagement rings

Getting Diamonds Online - Is This Online Jeweler Right For You?

Buckingham

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Halo Diamond Ring in Buckingham

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Buckingham, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Buckingham, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Buckingham. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Buckingham to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Buckingham for you engagement or wedding.

unique wedding bands

Buckingham How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

18k diamond tennis bracelet

Ways To Purchase Diamonds When Purchasing Wholesale.

Buckingham

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Three Stone Round Diamond Ring Settings in Buckingham

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Buckingham, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Buckingham, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Buckingham. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Buckingham to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Buckingham for you engagement or wedding.

18k diamond tennis bracelet

Buckingham How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

There are a variety of styles of involvement rings of 2018 that are extremely trendy. Whatever from lead ruby rings and tinted rocks to "green" rings and channel established diamond rings came to be preferred in 2018.

Lead ruby rings are rings with 3 or 4 rows of small, even-sized rubies that normally go around the entire ring. A larger center rock set over the remainder of the ring finishes the look. Pave diamond interaction rings are one of the best engagement rings of 2018 because they are a sophisticated option for an involvement ring while producing a whole lot of glimmer on a soon-to-be bride-to-be's ring finger. You'll also locate pave ruby wedding celebration bands that match your involvement ring as well as make it much more sparkly.

Colored rocks have actually additionally expanded in appeal. As a result of this, rings with colored rubies are amongst the very best engagement rings of 2018. Rubies come in a variety of colors, consisting of yellow, blue, pink, as well as also black. Real tinted diamonds are very rare, which makes them extremely costly. A one-carat tinted ruby can run upwards of 10 thousand dollars. Nevertheless, if you could not manage to invest this much money on an involvement ring, there are a few choices that will certainly still enable you to be fashionable with a colored stone. With the current modern technology, you can acquire a manufactured tinted diamond. With the advances that have been made, the majority of people could not tell the difference between an extracted diamond and a manufactured one. If you purchase or appoint a man-made diamond, you can choose whichever shade you prefer, as well as save a number of countless dollars in the meanwhile. Alternatively, if you desire a colored rock yet do not require a diamond, emerald greens, sapphires, as well as rubies make wonderful options for involvement rings and are much less costly compared to extracted tinted rubies.

Environment-friendly interaction rings are also amongst the ideal involvement rings of 2018. With more people worried concerning the setting and also concerning the human legal rights concerns that border typical diamond mining, even more individuals are searching for alternatives to conventional engagement rings. One opportunity is to get an interaction ring that has a diamond that was extracted in Canada rather of South Africa. Canada does not have the very same human civil liberties issues rotating around its ruby market, so it's thought about to be more friendly to the world. Alternatively, acquiring a synthetic ruby ring is likewise taken into consideration to be much more "green" since not only does it not have the same human rights issues that mined rubies do, however it does not destroy the earth like mining for rubies has a tendency to do. Conversely, the most effective involvement rings of 2018 include antique engagement rings because the greenest engagement rings are those that are reused and also reused. By acquiring an interaction ring that is antique, you are not adding to the new ruby ring market or the devastation of the setting.

Channel set ruby rings are likewise on the checklist of best engagement rings of 2018. Channel set engagement rings have actually the stones established within the band of the ring, so the top of the stone is even with the top of the ring. Channel established rings are specifically suitable due to the fact that the rubies are protected from being damaged since you can not reach the stone to chip them. Also more preferred are channel set ruby rings made out of platinum, which has actually lately grown in popularity. If you desire to buy a ring that is much more distinct, however, you can have a network set interaction ring set with rocks aside from rubies. Sapphires are an especially prominent selection for interaction rings.

beautiful engagement rings

Quality Improved Diamonds - Some Things You Had To Know!

Buckingham

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia