6 Ct Ring in Washington

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Washington, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Washington, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Washington. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Washington to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Washington for you engagement or wedding.

engagement rings

Washington How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Interaction rings are available in a variety of styles, rocks, cuts and also forms. Among all the kinds of rocks made use of in involvement rings, diamonds are the most precious and suitable ones. Their sparkle truly has the ability to win a lady's heart. There is a fantastic collection of ruby involvement rings readily available in the market. Some of the rings are developer developments, which are created as each the customer's option. They can likewise be called personalized diamond engagement rings. Some of the jewelry experts supply the consumers with the ability of experienced designers to bring magic to the or else routine attributes and also forms.

Developer ruby engagement rings are not just designed according to the choice of consumer however additionally fit their budget plan. These rings are inexpensive, as compared with the other ruby engagement rings. The purchasers can pick their very own ring settings and also match the rubies, to produce a special piece of precious jewelry for enjoyed ones. The majority of the designer diamond engagement rings are made in white gold, yellow gold as well as platinum. Apart from the setups and ruby selection, there are a number of various other details that play an essential duty in creating a ring. Besides picking a particular design, it is very important for the purchasers to bear in mind the various mixes of designs. The width, thickness and specific dimension of the rings are also important and also should be considered while creating a diamond involvement ring. The majority of these rings take about 6 to 8 weeks to be made.

Designer diamond engagement rings are extremely great alternatives, contrasted to the readymade rings quickly available. These rings use even more complete satisfaction to the buyers and are unique, owing to the individual touch. They provide the buyer to work with the style and option of stone as well as individualize the development.

pear diamond solitaire

How to Purchase Diamonds When Purchasing Wholesale.

Washington

Rubies are normally available in a really wide variety of shades. Most individuals find out about colorless rubies as well as GIA's color grading system that is made use of to classify a diamond's body color ... you know D, E, F, and so on. This color grading system is just utilized to identify the most usual diamond body color of yellow however anytime a diamond is found in an additional color like pink, blue, green, and so on; then this diamond is described as a "" fancy ruby"".

Natural Fancy diamonds can be very costly and also lots of times a lot more costly than a comparable size anemic diamond. A really good instance of a Fancy ruby is the well known 45.52 carat weight fancy deep blue diamond, the Hope Ruby, which gets on screen in the Smithsonian Nature Gallery in Washington, DC.

A shade enhanced diamond is a 100% natural ruby that has actually had its shade altered. And most importantly, color improved diamonds can be found in a very broad selection of colors at very cost effective prices!

A little background- For lots of, several years it has been well recognized that a ruby's color could be "" improved"" by placing a little bit of colored substance on the surface of a ruby and also much like magic ... a ruby that had a visible yellowish color would certainly transform to a much more attractive near anemic diamond. Regrettably, this kind of shade boosted diamond could transform back to its original body color if this colored material was unintentionally gotten rid of. In even more recent years, the innovation of color enhanced diamonds has actually gone exceptionally high tech. It is now possible to completely change the color of a ruby! These processes are thought about irreversible due to the fact that it does continue to be secure when revealed to everyday regular problems. The color will certainly not fade if revealed to sunlight or be washed off by harsh chemicals.

How is it done? The desired outcome of any one of these therapies is to have an extra valuable ruby. A less valuable ruby would be a ruby that has a low body shade or sometimes a reduced clearness. The color improved diamond treatment business recognize if they start off with a particular kind of ruby and also procedure it for a particular quantity of time that they need to wind up with a certain color but it does not always function that way. This is a scientific research that does call for some art in their processes ... the only process that offers consistent outcomes is the finishing process.

The three processes are as follows- Refine # 1- HPHT Color Enhanced Diamonds- High Pressure/ Heat (HPHT) therapy could improve the color of certain sorts of brownish rubies as well as therefore boost their value. General Electric has established a procedure that basically is a mechanical simulation of a ruby's development in nature. The color improved diamond will be warmed up to a very heat under an extremely high, supported stress. Mistakes in the crystal structure are after that rearranged resulting in a modification of the ruby's shade. Due to the fact that the problems of HPHT are really just like ruby's initial formation, just a well furnished laboratory will certainly be able to positively recognize this kind of color improved diamond. HPHT was first utilized to turn yellow-colored diamonds into even more marketable fancy tinted improved diamonds, and now it is likewise made use of to change some out of favor brown rubies right into preferred colorless colored improved rubies.

Refine # 2- Irradiated Color Enhanced Diamonds- OK ... do not start getting all thrilled since you saw words irradiated! This is a 100% risk-free procedure that is very much like what is used to preserve food by subjecting it to a stream of Gamma rays. The shade improved diamond procedure is done in several various means but the outcomes are all the same. You begin with a reduced shade (P, Q, R, and so on) 100% all-natural diamond that has actually already been cut as well as polished, then it is subjected to a stream of quick electrons. Throughout this component of the process the diamond will certainly look to an extremely dark color due to the fact that some of the atoms in the diamond's crystal framework have now been disjointed as well as this subsequently has actually impacted the means light go through the diamond. Next the diamond goes via a regulated home heating (annealing) process, this enables a few of those atoms to move (partially fixed) in order to acquire a preferred color.

Process # 3- Covered Shade Boosted Diamonds- The covering on sleek rubies refers to a thin man-made layer that changes the color of the ruby. The finish can either be of the desired color or could create a tinted interference-effect. Regrettably often this procedure is done to deceive a buyer. It is a reasonably very easy process to do, it has actually been around for years (although the finishes materials are far better now), and it does not call for a lot of expensive advanced devices. Recently, I've seen some pink layered rubies on the market, they are very eye-catching ... and naturally you would need to buy them understanding that they have been layered and also follow your jewelry expert's standards about having and also caring for these shade improved diamonds. The finishing could be put on the entire of a ruby's surface, just all-time low of the ruby, or to a slim area near the band. A well-applied finish could alter the color by several shade quality. Some coverings can be eliminated via boiling in acid, solid cleansing services, or perhaps house chemicals. In some cases dots or bigger areas of purple or blue ink are paintinged on the ruby to assist counteract a yellow-colored shade. The diamond's setting will normally cover the dots, so they are challenging to see in a placed rock.

So, is a shade boosted ruby right for you? Possibly ... all-natural expensive color diamonds could be gorgeous yet they are expensive! Shade improved rubies are affordable and enable many people to possess a vibrantly colored ruby. Ask your neighborhood jewelry expert if they have any type of Fancy diamonds ... either natural or color boosted diamonds. It is always fascinating, and also enjoyable, to take a look at something various!

Under normal wear the irradiated and also HPHT shade improved diamonds will certainly have no worry of the color fading away. The only factor to consider will certainly be when you should have any sort of solution done on the item of fashion jewelry. If this kind of color improved diamond is subjected to excessive amounts of heat it might impact the shade. The jewelry expert will certainly require to know that the ruby is a color improved diamond before any kind of work is done and also then the jeweler will be able to pick the very best strategy. Shade improved rubies are currently additionally made use of as the small accent diamonds around a larger anemic diamond. There are several interesting pieces of fashion jewelry available with little blue, yellow, black, or green color enhanced rubies.

Currently that you recognize regarding color boosted diamonds as well as somebody tries to sell you on what they call an all-natural expensive tinted diamond yet it goes to a super deal rate ... you will recognize that something just does not sound right about the offer. A report from a recognized grading lab should go along with all all-natural Fancy tinted rubies that are marketed as all-natural. If you deal with a trusted firm and also you have actually been reassured regarding exactly what you are purchasing, then you will certainly reduce the possibility of something negative happening to you. As with any kind of circumstance entailing an expensive purchase of something that few people are experienceded in, education ought to be a vital part of your plan. This is even much more vital if you plan to purchase a shade improved diamond. Bud Boland has actually been in the precious jewelry organisation for 40 years and also has actually done everything from watchmaking, ruby setting, jewelry production, and has been a Jeweler for virtually 35 years. He is a Graduate Jeweler from GIA (Gemological Institute of The U.S.A.), which is also the location where he was an Instructor. He has instructed about diamonds to hundreds of students from around the globe

___________________________________________

Rose Gold Diamond Necklace in Virginia

Yellow Gold Diamond Necklace in Washington

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Washington, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Washington, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Washington. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Washington to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Washington for you engagement or wedding.

round engagement rings

Washington How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Diamonds are normally readily available in a very wide variety of shades. Most individuals know regarding colorless diamonds as well as GIA's shade grading system that is used to identify a diamond's body color ... you recognize D, E, F, etc. This color grading system is just made use of to identify one of the most common ruby body shade of yellow nonetheless anytime a diamond is discovered in another shade like pink, blue, environment-friendly, etc.; after that this diamond is referred to as a "" fancy ruby"".

All-natural Fancy rubies can be very expensive and also several times a lot more expensive compared to a comparable dimension colorless diamond. A really excellent example of a Fancy ruby is the notorious 45.52 carat elegant deep blue ruby, the Hope Diamond, which gets on screen in the Smithsonian Nature Gallery in Washington, DC.

A color enhanced ruby is a 100% all-natural diamond that has had its shade altered. As well as most importantly, shade enhanced diamonds come in a really wide selection of shades at very affordable costs!

A bit of history- For several, several years it has actually been popular that a ruby's color might be "" enhanced"" by putting a little colored substance externally of a diamond as well as similar to magic ... a diamond that had an obvious yellowish color would certainly alter to a much more eye-catching near colorless diamond. Regrettably, this kind of color boosted diamond might alter back to its initial body shade if this colored substance was unintentionally removed. In more recent years, the technology of color boosted diamonds has gone extremely advanced. It is currently feasible to totally change the shade of a diamond! These procedures are thought about permanent because it does remain steady when exposed to daily typical problems. The color will not discolor if subjected to sunshine or be washed off by extreme chemicals.

How is it done? The desired result of any of these treatments is to have a more valuable ruby. A less valuable ruby would be a diamond that has a reduced body shade or in some cases a reduced quality. The color enhanced diamond therapy firms recognize if they start with a particular kind of ruby and procedure it for a particular amount of time that they should wind up with a certain shade however it does not constantly function this way. This is a scientific research that does require some art in their procedures ... the only procedure that gives constant results is the layer procedure.

The three procedures are as follows- Refine # 1- HPHT Color Improved Diamonds- High Stress/ High Temperature Level (HPHT) therapy could improve the color of particular sorts of brownish rubies as well as thus enhance their worth. General Electric has created a procedure that virtually is a mechanical simulation of a diamond's creation in nature. The color improved ruby will be heated up to an extremely heat under a very high, supported stress. Mistakes in the crystal structure are then rearranged resulting in a change of the diamond's color. Because the problems of HPHT are very much like diamond's initial formation, just a well furnished lab will certainly have the ability to favorably identify this sort of shade improved diamond. HPHT wased initially made use of to transform yellowish rubies into more valuable fancy tinted enhanced rubies, but now it is likewise utilized to transform some out of favor brown rubies into better colorless tinted boosted diamonds.

Refine # 2- Irradiated Color Boosted Diamonds- OK ... do not begin getting all excited because you saw words irradiated! This is a 100% risk-free process that is very similar to just what is used to protect food by exposing it to a stream of Gamma rays. The shade boosted ruby process is carried out in a number of various means yet the outcomes are all the very same. You start with a reduced color (P, Q, R, and so on) 100% all-natural ruby that has already been cut as well as brightened, then it is revealed to a stream of quick electrons. Throughout this component of the process the ruby will certainly transform to a really dark color due to the fact that a few of the atoms in the ruby's crystal structure have currently been disjointed and this in turn has affected the way light go through the diamond. Next the ruby undergoes a controlled home heating (annealing) process, this allows several of those atoms to transfer (partially fixed) in order to acquire a desired shade.

Process # 3- Coated Color Boosted Diamonds- The covering on polished rubies refers to a thin artificial layer that changes the color of the diamond. The covering can either be of the desired shade or can trigger a colored interference-effect. However in some cases this process is done to deceive a customer. It is a fairly simple process to perform, it has actually been around for lots of years (although the finishes products are better currently), and also it does not need a great deal of costly high technology tools. Lately, I have actually seen some pink covered rubies on the market, they are really attractive ... as well as obviously you would need to buy them recognizing that they have been coated and follow your jeweler's standards about having and also looking after these shade improved diamonds. The finishing can be applied to the entire of a ruby's surface area, simply the bottom of the ruby, or to a narrow area near the band. A well-applied finishing could transform the color by one or even more shade grade. Some coatings could be eliminated via boiling in acid, solid cleaning options, and even house chemicals. In some cases dots or larger locations of purple or blue ink are painted on the diamond to assist counteract a yellowish color. The diamond's setting will generally cover the dots, so they are challenging to see in an installed stone.

So, is a color improved diamond right for you? Possibly ... all-natural expensive shade diamonds could be beautiful but they are costly! Color enhanced rubies are economical and enable lots of individuals to have a brightly tinted ruby. Ask your local jewelry expert if they have any kind of Fancy rubies ... either all-natural or shade improved diamonds. It is constantly fascinating, and enjoyable, to check out something various!

Under typical wear the irradiated as well as HPHT shade boosted rubies will certainly have not a problem of the shade fading away. The only factor to consider will be when you should have any kind of solution done on the item of fashion jewelry. If this sort of color improved ruby is subjected to excessive quantities of heat it might influence the color. The jewelry expert will should understand that the ruby is a shade enhanced ruby before any kind of job is done as well as after that the jewelry expert will certainly be able to select the very best program of activity. Shade improved rubies are now additionally made use of as the little accent rubies around a larger anemic ruby. There are numerous amazing pieces of precious jewelry offered with small blue, yellow, black, or eco-friendly shade enhanced diamonds.

Currently that you understand about color improved rubies as well as somebody aims to sell you on just what they call a natural expensive tinted ruby however it goes to an incredibly bargain cost ... you will know that something simply does not seem right concerning the offer. A record from a reputable grading lab must come with 100% natural Fancy tinted diamonds that are marketed as all-natural. If you take care of a reliable firm as well as you have been reassured about what you are acquiring, after that you will certainly reduce the opportunity of something bad occurring to you. As with any scenario entailing a costly acquisition of something that not lots of people are experienceded in, education needs to be a necessary component of your strategy. This is much more important if you intend to acquire a shade boosted diamond. Bud Boland has remained in the fashion jewelry service for 40 years as well as has done whatever from watchmaking, diamond setup, fashion jewelry production, as well as has been a Gemologist for nearly 35 years. He is a Graduate Gemologist from GIA (Gemological Institute of America), which is likewise the place where he was an Instructor. He has instructed regarding rubies to numerous students from throughout the world

10 ct ring

Rating Rubies in the Harsh!

Washington

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

White Gold Halo Ring in Washington

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Washington, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Washington, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Washington. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Washington to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Washington for you engagement or wedding.

jewelry

Washington How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

There are a variety of styles of engagement rings of 2018 that are unbelievably trendy. Everything from pave diamond rings and also colored stones to "green" rings as well as network set diamond rings became incredibly popular in 2018.

Pave diamond rings are rings with three or 4 rows of little, even-sized rubies that generally go around the whole ring. A bigger facility stone set over the remainder of the ring completes the look. Lead diamond involvement rings are among the very best engagement rings of 2018 since they are an elegant selection for an interaction ring while creating a great deal of shimmer on a soon-to-be bride's third finger. You'll likewise locate lead ruby wedding celebration bands that match your involvement ring and also make it a lot more sparkly.

Colored rocks have actually also grown in appeal. Due to this, rings with colored rubies are amongst the very best interaction rings of 2018. Rubies come in a range of shades, consisting of yellow, blue, pink, as well as black. True tinted rubies are exceptionally unusual, that makes them exceptionally costly. A one-carat tinted ruby could run upwards of 10 thousand bucks. Nevertheless, if you can not afford to spend this much money on an engagement ring, there are a few options that will still allow you to be fashionable with a tinted stone. With the most up to date modern technology, you can purchase a manufactured colored ruby. With the advances that have actually been made, the majority of people can not inform the distinction in between an extracted diamond as well as a synthetic one. If you purchase or commission a manufactured diamond, you could select whichever color you prefer, and also save several countless bucks in the meanwhile. Alternatively, if you desire a tinted stone yet don't need a ruby, emeralds, sapphires, and rubies make terrific options for involvement rings and are much more economical than extracted tinted rubies.

Eco-friendly involvement rings are also among the most effective interaction rings of 2018. With more people worried concerning the environment and also regarding the human rights problems that surround typical diamond mining, even more people are searching for options to traditional engagement rings. One opportunity is to acquire an interaction ring that has a diamond that was mined in Canada as opposed to South Africa. Canada does not have the very same civils rights concerns revolving around its diamond market, so it's taken into consideration to be much more pleasant to the world. Alternatively, buying a man-made ruby ring is additionally considered to be a lot more "eco-friendly" since not just does it not have the same human legal rights issues that extracted diamonds do, but it does not destroy the planet like mining for diamonds tends to do. Conversely, the very best interaction rings of 2018 include antique engagement rings considering that the greenest engagement rings are those that are reused as well as recycled. By getting an interaction ring that is antique, you are not contributing to the brand-new diamond ring market or the destruction of the setting.

Network set ruby rings are additionally on the listing of ideal involvement rings of 2018. Network collection involvement rings have actually the rocks established within the band of the ring, so the top of the rock is even with the top of the ring. Network set rings are specifically perfect due to the fact that the rubies are protected from being harmed since you can not reach the rock to chip them. A lot more preferred are network collection diamond rings made out of platinum, which has actually recently grown in popularity. If you intend to acquire a ring that is also much more distinct, however, you can have a channel set involvement ring set with rocks other than rubies. Sapphires are a particularly prominent option for involvement rings.

eternity ring

Purchasing Diamonds Online - Is This Online Jeweler Right For You?

Washington

There are a variety of designs of engagement rings of 2018 that are unbelievably fashionable. Whatever from pave diamond rings as well as colored rocks to "green" rings and also channel set ruby rings became preferred in 2018.

Pave diamond rings are rings with 3 or four rows of tiny, even-sized diamonds that typically walk around the whole ring. A larger center stone established above the remainder of the ring finishes the appearance. Lead diamond engagement rings are among the ideal engagement rings of 2018 because they are an elegant choice for an engagement ring while creating a whole lot of shimmer on a future bride-to-be's third finger. You'll additionally locate lead diamond wedding bands that match your involvement ring and make it much more sparkly.

Colored rocks have actually likewise grown in popularity. Due to this, rings with colored diamonds are amongst the most effective involvement rings of 2018. Diamonds come in a variety of shades, including yellow, blue, pink, or even black. True colored diamonds are extremely uncommon, that makes them very expensive. A one-carat tinted diamond could run upwards of ten thousand bucks. However, if you could not manage to spend this much loan on an engagement ring, there are a few alternatives that will certainly still permit you to be fashionable with a colored rock. With the most recent innovation, you can purchase a synthetic colored diamond. With the advances that have actually been made, most individuals can not tell the difference in between an extracted ruby and a synthetic one. If you purchase or commission a manufactured ruby, you could select whichever color you like, and save a number of hundreds of dollars in the meantime. Alternatively, if you desire a colored rock yet don't require a ruby, emeralds, sapphires, and rubies make terrific alternatives for interaction rings and also are much cheaper compared to mined colored rubies.

Environment-friendly involvement rings are likewise amongst the finest engagement rings of 2018. With more people concerned concerning the atmosphere and concerning the civils rights problems that border typical diamond mining, more individuals are searching for options to traditional engagement rings. One opportunity is to purchase an engagement ring that has a ruby that was extracted in Canada rather than South Africa. Canada does not have the very same civils rights concerns rotating around its diamond market, so it's thought about to be a lot more friendly to the world. Alternatively, purchasing a manufactured ruby ring is likewise taken into consideration to be much more "green" since not just does it not have the very same human civil liberties issues that extracted diamonds do, but it does not destroy the planet like mining for rubies has a propensity to do. Alternatively, the best interaction rings of 2018 consist of antique engagement rings since the greenest involvement rings are those that are reused and reused. By acquiring an engagement ring that is antique, you are not adding to the new ruby ring market or the damage of the environment.

Channel established ruby rings are likewise on the listing of ideal involvement rings of 2018. Network set involvement rings have actually the rocks set within the band of the ring, so the top of the stone is despite the top of the ring. Network established rings are especially excellent because the rubies are safeguarded from being damaged due to the fact that you can not reach the stone to chip them. A lot more popular are channel set diamond rings constructed of platinum, which has lately grown in appeal. If you wish to acquire a ring that is a lot more distinct, though, you can have a network set engagement ring set with rocks aside from diamonds. Sapphires are a particularly prominent option for interaction rings.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Anniversary Rings in Washington

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Washington, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Washington, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Washington. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Washington to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Washington for you engagement or wedding.

channel set diamonds

Washington How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

You have actually been dating the person of your desires for rather some time now. You may or could not be remaining with each other as a couple, either of the two has its very own connection issues; if you do not live as a pair, the sensation of loneliness that rises via your heart each time your partner states the words "good bye" after a lovely day well spent together motivates you to do even more and each time you transform wrongly to show to them your feelings, the empty space that greets you, swiftly transforms your motivation to do more right into a resolve to do more now! For those who have actually taken their relationships a step even more by relocating together.

Because of the isolation felt each time a partner says excellent bye, various types of stress as well as sensations established in they could be the have to make your love official for the entire world to see or you both intend to start a stable family. Whatever motivates you into finally making the very first step to one of the most essential commitment you would ever before make in your entire life could not be off importance but the icon which you have to provide while taking this action is of the utmost value - "The Interaction Ring".

Today buying an engagement ring has now end up being the condition quo of recognizing yourself as one that is already taken and all set for marriage but have you ever played with the rock or band on your hand and also considered its background? Because it's not defined in the bible or the earliest records that give detailed accounts of techniques before marriage in time passed.

The prominent interaction ring of the modern age had its beginning as current as the 19th century as well as had not been constantly a sign of undying love, it was basically the initial part settlement of the bride price to be paid to the bride's family yet handed over and also worn by the bride. It was a sort of insurance offered the female, in situation the possible partner which was constantly the male at that time dissolves the marriage thus endangering the woman's virtue as well as attract other men.

Real meaning as well as icon of the engagement ring began radiating via in the 20th century, when guys provided their fiancées a band that signified their love and also intentions for a marital relationship union, the interaction ring indicated that she had been taken, out of limits and also ready to be married to her true love and also it was positioned on the 4th finger of the left hand, for that finger was believed to have a blood vessel running with it which came straight from the heart consequently symbolizing the finger as a "heart finger". Earlier rings could simply be an item of silver or an iron band without any adornment, which the lady inserts into her 4th finger on her left hand, this was the method momentarily till commercial rings and the media took control of the engagement scene. The Adverts revealed on interaction rings in the center of the 19th century suggested that males ought to spend no much less compared to 2 months of their month-to-month earnings to acquire the perfect ring for his priceless bride to be as well as simply with an advert the meaning and also style of the involvement ring took a brand-new instructions. The modern interaction ring is a sign that shows that a person is involved to be married snappy. The cut, pricing and construct from the engagement ring although not all essential, adds a particular flavour to your interaction day or event and has repudiated a brand-new jewellery market all on its own. The Engagement ring now can be found in various designs; it can be a band made of precious materials such as Gold, Platinum or Silver or it could be a band laced with treasure stones to offer an alluring appeal to the ring. The various major styles of engagement rings will be discussed below.

Various Sorts Of Involvement Rings

Solitaire rings; these are the ultimate traditional involvement rings, the jewelry ring contains a band and a treasure rock; the band might be made from any type of product of your option ranging from gold to platinum while the gems ought to additionally be opted to fit your strange characteristics, maybe diamonds or pearl cut in different methods that would be explained below.

Involvement Rings with Side rocks: These exquisite rings are made with gemstones inserted right into the sides of the band, which can be constructed from any type of steel material depending upon your taste. Some side stones ring likewise come with a main stone at the middle. The prominent gems used for this layout of rings are typically rubies but you can personally customize your gemstone to the preference of your love.

The 3 Rock Rings or the Trinity ring: this is a ring style with its own enchanting history, it is thought that each rock in the 3 stone ring symbolizes the past, existing and also future of the time in which a couple has actually invested together as well as the ring would bind them with each other for all endless time. The ring design is that of a spotless platinum band with 3 charming gemstones; one at the middle with 2 place purposefully by the sides. The gemstones are normally crazy of diamonds but you are enabled to tailor yours right into three different kinds of gemstones if you so need.

The Matching Wedding Set: this is a gorgeous mix of both the interaction ring as well as the real wedding band, there is no collection style on how a matching bridal collection ought to resemble yet it is usually excellent to have either the interaction ring or the wedding ring emphasizing the other as well as vice versa I.e. an elegant platinum interaction ring with a gemstone need to be coupled with a straightforward Gold timeless wedding band, providing the bride-to-be with a touch of colour. Tension Rings: allow the name not work as a barrier to you when considering the stress ring for it is among those designs we call easy yet indefinitely sophisticated, it contains a band made from any material of your selection, firmly holding a gemstone in its grasp with pressure i.e. the gemstone is not held by prongs but gripped between the 2 sides of the band product you picked. The band product works as its holding assistance. It is highly recommended you go with 2 contrasting colours for the band as well as the gemstone to highlight the real charm of the tension ring.

The Various Cuts of Gems

The Padding cut: this method of cutting a gems, gives the rock a traditional shape that is in between a rectangular shape and an oval, it is among the most popular jewelry cuts as well as it's likewise called the antique cut.

The Marquise cut: the method used in cutting the form of the marquise cut gives the gems an oblong form in the center with ends. This ring has a classic elven or should I state earthy look that brings out the mythological elegance in your new bride.

The Emerald cut: the emerald gem normally has its own defined form as well as this cut technique plainly mirrors it, the emerald cut is a rectangular cut with chopped corners extending at its 4 ends.

The Asscher cut: this approach of reducing the gemstone offers it a shape people state is similar to the emerald rectangular shape however it is much more octagonal in form compared to rectangular shape, the octagonal form helps it catch light and show it in various directions. It's a completely stunning cut for a rings gems.

The Princess cut: this is one of one of the most used cuts on gems, it is square fit as well as assists bring out the appeal of the gems made use of quite demurely. The Round cut: this cut general looks round but its even more than that for it has various spikes included in its surface areas making it among, if not one of the most shining gemstone cut of the great deal, it is understood among women for its capacity to blind the eye (shimmer).

The Heart cut: perfect for the romantics at heart and shaped to belly their hearts, it is a simple and also elegant cut that is fairly prominent amongst ladies. After offering a basic reveal on interaction ring styles and also cuts, the following step is to offer your notification the leaders in the sector that provides you with the ideal and also most pricey rings- in many cases- available.

Costs Barnes: the producers of a few of the most splendid and pricey interaction bands out there. Tiffany: everyone recognizes the name Tiffany this designer residence also offers consumers with top of the range rings as well as costs postpone. Tacori: the Tacori style is likewise among one of the most sought after interaction rings in the jewelry market the cut and also setup of its designs are always a pleasure to see.

In picking a ring your spending plan must also enter into play so either you acquire Tiffany's or an ordinary engagement ring, it's the thought that counts.

round diamond earrings white gold

Exactly how Do You Know If The Ruby Is Fake Or Actual Diamond?

Washington

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

2 Ct Ring in Washington

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Washington, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Washington, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Washington. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Washington to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Washington for you engagement or wedding.

white gold diamond chain

Washington How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

3 stone sapphire ring

What You Should Know When Buying a Diamond Ring

Washington

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

___________________________________________

5 Stone Diamond Ring in District of Columbia