Rose Gold Diamond in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

heart shaped wedding sets

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To start our feature on different kinds of gems, we will certainly start with the very best and most well known gemstone of them all the diamond. The ruby is the best gems. It has few weaknesses and also lots of strengths. It sparkles with its extraordinary value and sentimental worth. It is utilized in wedding event rings to stand for endless love or utilized as gifts/jewelry to be offered to loved ones. Yet the diamond is a lot greater than its everlasting elegance.

The ruby derives its name from the Greek job adamas suggesting unsurpassable. In firmness, there is no contrast. The diamond rates in the Mohs range a 10 which is the hardest material in the world. Its cutting resistance is 140 times that of the ruby and also sapphire, the gemstones(Diamond) that are next in the Mohs range in solidity. The diamond's optical buildings such as gloss as well as rigidness make it distinct and easily distinguished from various other imitations. Delight in!

* Background of Diamonds

The initial taped diamond days back around 800 B.C. in India. Some believe it also dated back 6,000 years back. The diamonds were used as ornamental objectives as well as additionally as amulets to fend off bad as well as supply security in battle. Throughout the Dark Ages, diamonds were also specified to be made use of as a clinical aid. Spiritual physicians also told individuals that if they hold a ruby in a hand and make the sign of the cross would, it would heal and also ailment and heal injuries.

Rubies ended up being much more prominent during the 19th century due to discovery of ruby down payments in South Africa. This exploration results in increased supply, improved cutting and also polishing methods, and also development in economic climate. In 1979, rock hounds located the Argyle pipeline in Australia which to this date is the richest ruby down payment worldwide. Argyle, considering that after that, alone is accountable for supplying over one third of the world's diamonds every year.

* Diamonds: How are they formed?

Rubies includes an allotrope of carbons that are created in high-pressure, high-temperature conditions. Diamonds are created 90 miles under the Earth's surface at temperature levels of regarding 2200 levels Fahrenheit. Rubies are formed deep within the earth and ultimately, over extremely lengthy periods of time, press their means to the earth's surface area, normally through volcanic eruptions.

The age of these rubies from under the surface of the planet are from 1 to 3.3 billion years of ages! When diamonds are formed and begin their climb to the planet's surface area, they undergo networks where the lava from the volcano climbs to the surface, grabbing rubies in the process and also eventually transferring them on the surface area, where they are eventually located and mined.

* The 4 C's of Diamonds

There are 4 distinct characteristics that establish the value as well as top quality of a ruby. These are the shade, cut, clarity and also carat. Or else called the 4 C's of a ruby. In the complying with, we will certainly speak about these attributes in detail.

* Shade

In the last newsletter, we touch based on the shade of gems as being the most crucial attribute because of that color is one of the most apparent function. The ideal diamond should appear clear and colorless however this is not the instance for all diamonds. Diamonds can can be found in any kind of color of the rainbow most typical shade is a color of yellow or brown. The Geological Institute of America(GIA) have actually developed a guideline to grade diamond color. This standard consists of a lettering system that ranges from the alphabet D - Z. Please see listed below:

D E F No Shade G H I J Virtually Anemic K L M Faintly colored, can not barely be seen and typically yellow in shade N O P Q R Lightly tinted, generally yellow. Can be seen with the nude eye S T U V W X Y Z Tinted, starts from yellow and also proceeds to brownish

* Clearness

The cut a ruby is determined by the diamond's percentage such as its form, width and deepness. The cut identifies exactly what is called the diamond's "brilliance". Even if the ruby itself has best color and also clarity, with a poor cut the diamond will certainly have a boring luster. This is because the cut determines how light trips within the diamond. The Gemological Institute of America has actually also designed a quality grading system to rate diamond clarity. This grading system consists of Perfect (Fl), Internally Perfect (IF), Extremely Very Somewhat Consisted Of (VV1 or VV2), Extremely Slightly Included(VS1 or VS2), A Little Included(SI1 or SI2), and Consisted Of(I1, I2, and I3). Although this system had actually been contributed to the diamond industry, it is not extensively used. This is because of that it took a great deal of method and also training to incorporate it.

* Cut

The cut a diamond is identified by the ruby's proportion such as its form, size and also depth. The cut determines exactly what is called the ruby's "luster". Even if the diamond itself has perfect shade and also clarity, with a bad cut the ruby will certainly have a boring radiance. This is since the cut figures out exactly how light travels within the ruby.

There are 3 kinds of cuts that could determine the diamond's radiance. These are a superficial cut, a cut that is as well deep as well as optimal cut. A superficial cut is a cut of a diamond that is also low, that light traveling via it is shed under of the rock and also does not come back right into view. This cut makes a diamond show up lifeless as well as dull. A cut that is also deep is a cut that is too expensive, that light taking a trip through it runs away through the sides and also darkens the stone. An excellent cut is a perfect cut on a diamond that shows light to the top of the stone, providing it ideal sparkle.

* Carat weight

As stated on the last newsletter, a single carat weight(ct) weighs about 200 milligrams or.2 grams. For smaller sized carat weight rubies that evaluate less than a carat, it is revealed as factors (pt). Factors are 1/100 of a carat. Carat weight of a ruby is important as a result of that larger diamonds are rarer than smaller sized ones, so primarily the larger the diamond the extra expensive it is. There is no typical grading system or representation that could show various carat weight. This is since there are numerous variations of diamonds in shape as well as cut, that makes rocks of comparable weight, look various.

* Imitation Diamonds

Considering that diamonds are the most useful and rarest of all the gems, efforts have been made to duplicate and even boost diamonds using more economical choices. A lot of times, truthful errors have actually been made and also these choices or other gemstones such as spinel were occasionally confused with actual diamonds. Sometimes, some unethical people aim to sell these choices to misfortunate customers in order to earnings. Below we will review about these alternatives and also ways to recognize them.

* Synthetic Diamonds

Artificial rubies are rubies that are expanded produced in a lab. The first known cases of diamond synthesis were asserted to be documented between 1879 - 1928, but this was never validated. It had not been till the 1940's where research began in the United States, Sweden, Soviet Union began researching. Synthetic rubies are or else called High Pressure High Temperature Level (HPHT) rubies or Chemical Vapor Down Payment (CVD) rubies. The name of both these synthetic diamonds originates from the processes made use of to develop them. A few of these synthetic rubies could either have better, lower or comparable attributes compared to that of a diamond. As a result, these synthetic rubies are made use of for abrasives, reducing and also brightening tools, and switches in power plant.

* Simulants

Simulants are non-diamond substances that are utilized to duplicate the look and also even the form of a diamond. One of the most basic and also popular simulant is cubic zirconia (CZ). CZ at ordinary view can shimmer more compared to a diamond as well as it is much less thick, suggesting that a 1 carat CZ will be much bigger than a 1 carat diamond. Nowadays, an extra prominent simulant is moissanite, which has all the exact same attributes of a diamond. These qualities consist of firmness (Moissanite-9.25 and also diamond-10 in Mohs range), refractive index(Moissanite -2.65 and diamond -2.42) and also diffusion (Moissanite -.104 as well as ruby -.044). This makes it tough to differentiate both at plain view as well as would certainly usually require testers to inform the difference. In the next section we will go over how you can recognize moissanites and other replicas.

* Genuine or Phony?

An old method of identifying diamonds is to do a scratch examination. This needs scratching a ruby with one more ruby which is destructive and also is rarely used nowadays. The most effective and also most dependable way to evaluate for rubies is to utilize testers that utilize thermal conductivity. These testers contain battery powered thermistors placed with a retractable copper idea. This tester works by injecting the warm into the examined rock then the device determines the quantity of warmth that it carries out. Nonetheless thermal conductivity testers works best to distinguish diamonds and also its other simulants, it will certainly not help identify lab produced or artificial rocks. To be able to identify these, particular optical techniques are needed. Laboratories make use of strategies such as spectroscopy, microscopy and also luminescence in order to figure out a certain rocks beginning. The average person can make use of loupes and microscopes to identify synthetic rocks. Natural rubies typically have minor imperfections as well as imperfections such as additions or some sort of foreign material, which will certainly not be discovered in synthetics.

1 ct wedding band

Phony Or Real Ruby As Well As Is This Right For You

University Place

You have actually been dating the person of your desires for quite some time currently. You may or may not be staying with each other as a pair, either of both has its own partnership troubles; if you do not live as a couple, the feeling of loneliness that rises via your heart every single time your partner states the words "good bye" after a beautiful day well invested with each other inspires you to do more and whenever you transform incorrectly to share with them your feelings, the void that greets you, rapidly transforms your ideas to do more right into a resolve to do even more now! For those that have actually taken their relationships an action better by relocating in together.

Because of the loneliness really felt each time a companion claims great bye, different forms of pressures and also feelings embeded in they can be the have to make your love official for the entire globe to see or you both intend to start a secure family. Whatever inspires you right into lastly making the first step to one of the most vital commitment you would ever before make in your entire life could not be off importance yet the symbol which you should supply while taking this step is of the utmost significance - "The Interaction Ring".

Today purchasing an engagement ring has currently become the status quo of determining on your own as one that is currently taken as well as prepared for marriage but have you ever had fun with the rock or band on your hand as well as thought of its history? Since it's not defined in the holy bible or the oldest papers that provide thorough accounts of techniques prior to marital relationship in time passed.

The preferred engagement ring of the contemporary age had its start as recent as the 19th century and wasn't always an icon of undying affection, it was essentially the very first component settlement of the bride price to be paid to the new bride's family however turned over and also put on by the new bride. It was a type of insurance policy given for the woman, in case the potential companion which was constantly the male at that time dissolves the marriage consequently compromising the female's merit and also allure to various other guys.

Truth definition and also icon of the interaction ring began shining through in the 20th century, when males offered their fiancées a band that represented their love and purposes for a marital relationship union, the involvement ring signified that she had actually been taken, from limits as well as prepared to be married to her true love and also it was positioned on the 4th finger of the left hand, for that finger was believed to have a capillary running through it which came straight from the heart therefore signifying the finger as a "heart finger". Earlier rings can simply be an item of silver or an iron band with no accessory, which the female inserts into her 4th finger on her left hand, this was the method momentarily till commercial rings as well as the media took over the involvement scene. The Adverts shown on involvement rings in the middle of the 19th century suggested that guys should spend no less compared to 2 months of their monthly income to acquire the ideal ring for his priceless new bride to be and also simply with an advert the meaning and design of the engagement ring took a new direction. The contemporary engagement ring is a symbol that shows that a person is engaged to be married with style. The cut, rates as well as make from the involvement ring although not all crucial, includes a particular flavour to your involvement day or ceremony as well as has spurned a brand-new jewellery market all by itself. The Interaction ring currently can be found in different designs; it can be a band made of priceless products such as Gold, Platinum or Silver or it could be a band laced with gem rocks to give a tempting appeal to the ring. The different major layouts of interaction rings will be gone over listed below.

Different Kinds Of Engagement Rings

Solitaire rings; these are the ultimate traditional interaction rings, the solitaire ring contains a band and a gem rock; the band could be made from any material of your selection ranging from gold to platinum while the gemstone need to also be decided to fit your strange characteristics, it can be rubies or sapphire cut in different manner ins which would certainly be explained listed below.

Engagement Rings with Side rocks: These splendid rings are made with gems inserted right into the sides of the band, which could be made of any metal material depending on your preference. Some side stones ring likewise included a central stone at the middle. The preferred gems utilized for this style of rings are normally rubies yet you can personally customize your gems to the preference of your love.

The 3 Stone Bands or the Trinity ring: this is a ring layout with its very own enchanting background, it is believed that each stone in the three rock ring symbolizes the past, existing and future of the moment in which a pair has invested with each other and the ring would certainly bind them together for all infinity. The ring design is that of an immaculate platinum band with three exquisite gems; one at the middle with 2 location strategically by the sides. The gemstones are usually mad of diamonds but you are enabled to tailor your own right into 3 various kinds of gems if you so wish.

The Matching Bridal Establish: this is a stunning mix of both the interaction ring and the actual wedding band, there is no collection design on exactly how a matching wedding collection ought to look like however it is normally great to have either the interaction ring or the wedding celebration ring emphasizing the various other and also the other way around I.e. an exquisite platinum involvement ring with a gems should be combined with a simple Gold classic wedding event band, offering the bride with a touch of colour. Tension Rings: allow the name not function as a barrier to you when thinking about the stress ring for it is just one of those styles we call straightforward however forever sophisticated, it consists of a band made from any type of product of your option, firmly holding a gems in its grasp with stress i.e. the gems is not held by prongs however gripped between the 2 sides of the band product you selected. The band material works as its holding support. It is highly suggested you opt for two contrasting colours for the band as well as the gemstone to highlight the true beauty of the tension ring.

The Various Cuts of Gemstones

The Pillow cut: this method of reducing a gemstone, provides the stone a timeless form that is between a rectangular shape as well as an oval, it is among one of the most preferred jewelry cuts and also it's additionally referred to as the antique cut.

The Marquise cut: the method employed in reducing the shape of the marquise cut provides the gems an oblong shape in the middle with ends. This ring has a timeless elven or should I state natural appearance that brings out the mythological charm in your bride-to-be.

The Emerald cut: the emerald gem normally has its very own defined form and this cut method clearly mirrors it, the emerald cut is a rectangle-shaped cut with cropped corners protruding at its four ends.

The Asscher cut: this approach of cutting the gems offers it a shape individuals claim is similar to the emerald rectangle but it is a lot more octagonal in form compared to rectangular shape, the octagonal form assists it capture light as well as mirror it in various directions. It's a perfectly beautiful cut for a rings gemstone.

The Princess cut: this is among the most pre-owned cuts on gemstones, it is square in form and aids draw out the appeal of the gems used fairly demurely. The Round cut: this cut general looks round however its more compared to that for it has various spikes included in its surfaces making it among, if not the most radiating gems cut of the whole lot, it is understood amongst women for its capability to blind the eye (shimmer).

The Heart cut: excellent for the romantics at heart as well as shaped to stomach their hearts, it is a straightforward as well as classy cut that is quite prominent among ladies. After offering a basic reveal on interaction ring designs as well as cuts, the next step is to bring to your notification the leaders in the market that provides you with the very best and most costly rings- in many cases- around.

Expense Barnes: the manufacturers of some of one of the most beautiful and expensive engagement bands around. Tiffany: everybody knows the name Tiffany this designer house likewise offers clients with top of the array rings and also prices postpone. Tacori: the Tacori design is likewise among one of the most demanded engagement rings in the jewelry sector the cut and also arrangement of its styles are constantly a happiness to look at.

In choosing a ring your budget should additionally enter play so either you purchase Tiffany's or an ordinary involvement ring, it's the thought that counts.

___________________________________________

Vintage Wedding Rings in Washington

Rose Gold Engagement Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

white gold diamond necklace

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

white gold tennis bracelet

Start With the Fundamentals When Fascinated in Purchasing Diamond Fashion Jewelry.

University Place

Buying a diamond interaction ring is rather a worthwhile purchase every male should be fortunate sufficient to earn. Some who do not actually recognize excessive about jewelry and diamonds could really feel as if they ought to just go to a shop as well as select a ring which looks eye-catching to them. Although this might work, there are better methods to picking the very best feasible sort of diamond involvement ring for your liked one. The following will certainly note the top 10 secrets to purchasing a ruby interaction ring.

Look around

Probably one of the ideal tricks to bear in mind if you remember absolutely nothing else from this list is to look around. Buying a ring of this kind on a whim will certainly most likely not lead you to the most effective deal or the very best diamond. Therefore, take your time when shopping for an engagement ring, search and see just what is around to be purchased.

You Could Find a Lovely Diamond Interaction Ring on Sale

You need to additionally recognize that you have the ability to discover a splendid diamond interaction ring with a desirable price tag connected to it. This is not to claim that you need to restrict your selections just to sale products yet always feel cost-free to peruse the sale counter when searching for an involvement ring to provide to your future fiancée. Do see to it that it is a genuine sale as well as not one that runs all the time.

Dimension of the Diamond Really Does Not Issue

One more secret when it concerns purchasing an interaction diamond ring is that the carat dimension of the diamond is not truly just what issues when all is stated and done. Although some may believe that a bigger ruby equals a better diamond this is typically not the instance as cut, shade and quality all must be thought about in addition to the carat weight of the rock.

Acquiring Online Is an Alternative

With today's technology, you can purchase nearly anything online as well as the exact same is true for diamond engagement rings. For those who like the concept of an on-line purchase, there are a lot of websites which supply ruby rings up for sale as well as might use quite a bargain as well. Simply be certain to obtain paperwork mentioning truth high quality of the ring. The on the internet company needs to have a 30 day cash back guaranty with no concerns asked.

Getting the Ring with Wedding Bands Can Conserve Money

You might also find that if you remain in the marketplace for not just an involvement ring yet wedding celebration bands too, purchasing all these things together could conserve you loan. Particular ring designers will certainly generate interaction rings with matching wedding bands which you could buy as a set.

White Gold Appears Like Platinum However Is Less Costly

If your liked one suches as silver-tone jewelry however you are incapable to pay for a platinum ruby engagement ring, consider buying one constructed from white gold. White gold is an excellent choice as it looks like platinum but is much cheaper.

Jewelry Merchants Typically Have 1 Or 2 Sales Throughout The Year

Another secret to purchasing a ruby involvement ring is that numerous precious jewelry retailers use sales during the year. Some are holiday sales whereas others are a way for the fashion jewelry store to obtain rid of the old supply making area for brand-new items entering the shop.

Purchasing the Ruby as well as Setup Separately Can Save Money

You may additionally discover that getting the ruby as well as setting separate from each other can save you some money. It additionally enables you to select specifically the kind of ring that you want and be able to see it prior to the rock is established.

Purchasing a Small Carat Weight Dimension with Baguettes Is In Some Cases a Better Deal

If you are looking for a ruby interaction ring with a great deal of sparkle yet you are incapable to pay for a large carat diamond, take into consideration getting a smaller sized diamond but include baguettes to the ring. This will add sparkle and shine and also not set you back as high as a larger ruby could cost.

Think About Small Precious Jewelry Stores Which Offer Personalized Solution

For those who are looking for a fashion jewelry shop which will certainly provide customized solution, you could wish to buy the diamond involvement ring for your liked one at a small fashion jewelry store. These fashion jewelry shops are frequently run by the private owner who will do whatever possible to earn your engagement ring shopping trip magnificent.

___________________________________________

Vintage Wedding Rings in Washington

Marriage Rings in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

rose gold morganite halo engagement ring

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To begin our feature on different types of gems, we will begin with the best and most well known gemstone of them all the ruby. The ruby is the best gemstone. It has few weak points as well as numerous toughness. It shines with its phenomenal value as well as sentimental worth. It is made use of in wedding celebration rings to represent unlimited love or made use of as gifts/jewelry to be offered to liked ones. Yet the ruby is a lot more than its infinite appeal.

The diamond obtains its name from the Greek job adamas suggesting irresistible. In solidity, there is no comparison. The diamond prices in the Mohs scale a 10 which is the hardest material on Planet. Its reducing resistance is 140 times that of the ruby as well as sapphire, the gemstones(Corundum) that are next in the Mohs range in firmness. The ruby's optical properties such as luster as well as rigidity make it special and quickly differentiated from various other imitations. Delight in!

* History of Diamonds

The very first tape-recorded diamond days back around 800 B.C. in India. Some believe it also dated back 6,000 years earlier. The diamonds were used as decorative purposes as well as as amulets to ward off wicked as well as offer security in fight. During the Dark Ages, rubies were also mentioned to be used as a clinical aid. Religious doctors even told individuals that if they hold a diamond in a hand and also make the indication of the cross would, it would heal and illness as well as recover injuries.

Rubies became extra preferred during the 19th century due to exploration of ruby down payments in South Africa. This exploration leads to boosted supply, boosted cutting as well as polishing methods, as well as growth in economy. In 1979, rock hounds discovered the Argyle pipe in Australia which to this date is the wealthiest diamond deposit in the world. Argyle, because then, alone is in charge of providing over one third of the globe's diamonds yearly.

* Diamonds: Just how are they created?

Rubies contains an allotrope of carbons that are created in high-pressure, high-temperature conditions. Diamonds are generated 90 miles under the Earth's surface at temperatures of about 2200 degrees Fahrenheit. Diamonds are created deep within the earth and ultimately, over incredibly long durations of time, press their way to the planet's surface area, usually through volcanic eruptions.

The age of these rubies from below the surface of the earth are from 1 to 3.3 billion years old! When rubies are formed as well as begin their climb to the planet's surface area, they go through networks where the magma from the volcano climbs to the surface area, grabbing rubies along the method as well as ultimately transferring them externally, where they are at some point discovered and extracted.

* The 4 C's of Diamonds

There are four distinct qualities that determine the value as well as quality of a ruby. These are the shade, cut, quality as well as carat. Otherwise called the 4 C's of a ruby. In the adhering to, we will chat concerning these features carefully.

* Color

In the last newsletter, we touch based on the shade of gemstones as being the most essential feature because of the fact that shade is one of the most noticeable attribute. The excellent diamond ought to appear clear and also anemic but this is not the case for all diamonds. Rubies can be available in any type of shade of the rainbow most typical color is a shade of yellow or brownish. The Geological Institute of The U.S.A.(GIA) have actually developed a standard to quality diamond shade. This standard contains a text system that ranges from the alphabet D - Z. Please see below:

D E F No Color G H I J Nearly Anemic K L M Faintly tinted, cannot hardly be seen and usually yellow in color N O P Q R Gently tinted, normally yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins with yellow and also proceeds to brownish

* Clearness

The cut a diamond is determined by the ruby's percentage such as its shape, size and also deepness. The cut determines what is called the diamond's "sparkle". Even if the diamond itself has perfect shade and also clarity, with an inadequate cut the diamond will have a boring sparkle. This is due to the fact that the cut identifies just how light journeys within the ruby. The Gemological Institute of America has actually also created a clearness grading system to place ruby clearness. This grading system includes Flawless (Fl), Inside Flawless (IF), Really Extremely Somewhat Included (VV1 or VV2), Extremely Slightly Consisted Of(VS1 or VS2), A Little Included(SI1 or SI2), and Included(I1, I2, and also I3). Although this system had actually been added to the ruby sector, it is not commonly used. This results from that it took a great deal of technique and training to incorporate it.

* Cut

The cut a diamond is established by the ruby's proportion such as its shape, width and also depth. The cut determines exactly what is called the diamond's "sparkle". Even if the ruby itself has ideal shade and quality, with a poor cut the ruby will certainly have a dull brilliance. This is since the cut establishes how light journeys within the diamond.

There are 3 sorts of cuts that could determine the diamond's brilliance. These are a shallow cut, a cut that is unfathomable and also suitable cut. A shallow cut is a cut of a diamond that is as well reduced, that light taking a trip with it is shed under of the rock and also does not come back right into sight. This cut makes a diamond appear drab as well as plain. A cut that is unfathomable is a cut that is also high, that light taking a trip via it runs away through the sides and darkens the stone. A suitable cut is a perfect cut on a diamond that reflects light to the top of the rock, giving it ideal brilliance.

* Carat weight

As specified on the last newsletter, a single carat weight(ct) evaluates about 200 milligrams or.2 grams. For smaller sized carat weight diamonds that weigh much less compared to a carat weight, it is shared as factors (pt). Points are 1/100 of a carat weight. Carat weight of a diamond is very important due to the fact that bigger rubies are rarer than smaller sized ones, so primarily the larger the ruby the much more costly it is. There is no standard grading system or diagram that can reveal various carat weight. This is since there are many variants of diamonds in shape and also cut, which makes rocks of comparable weight, look various.

* Imitation Diamonds

Since rubies are one of the most useful as well as rarest of all the gemstones, efforts have been made to duplicate and even boost rubies making use of less pricey options. A whole lot of times, truthful blunders have been made and also these alternatives or other gemstones such as spinel were sometimes confused with actual diamonds. In some instances, some unethical people try to market these alternatives to misfortunate customers in order to revenue. Listed below we will go over about these alternatives and also means to determine them.

* Artificial Diamonds

Synthetic rubies are rubies that are expanded manufactured in a laboratory. The first well-known cases of diamond synthesis were declared to be documented between 1879 - 1928, but this was never validated. It wasn't till the 1940's where research study began in the United States, Sweden, Soviet Union began looking into. Synthetic rubies are otherwise called High Stress Heat (HPHT) rubies or Chemical Vapor Deposit (CVD) diamonds. The name of both these synthetic rubies stems from the processes utilized to create them. Some of these artificial rubies can either have better, minimal or comparable features than that of a diamond. Consequently, these artificial rubies are used for abrasives, cutting as well as brightening tools, as well as switches in power stations.

* Simulants

Simulants are non-diamond substances that are utilized to duplicate the appearance as well as the form of a diamond. The most fundamental and well understood simulant is cubic zirconia (CZ). CZ at simple view could glimmer even more compared to a ruby and it is much less dense, implying that a 1 carat weight CZ will be a lot bigger than a 1 carat weight ruby. Nowadays, an extra preferred simulant is moissanite, which has just the same features of a diamond. These features consist of firmness (Moissanite-9.25 as well as diamond-10 in Mohs range), refractive index(Moissanite -2.65 and diamond -2.42) and also dispersion (Moissanite -.104 and ruby -.044). This makes it tough to set apart both at ordinary sight and would typically require testers to inform the difference. In the next section we will go over exactly how to recognize moissanites as well as other imitations.

* Genuine or Phony?

An old approach of determining diamonds is to do a scrape test. This requires scratching a ruby with one more ruby which is devastating as well as is hardly ever used nowadays. The very best and also most reputable means to test for diamonds is to make use of testers that use thermal conductivity. These testers are composed of battery powered thermistors placed with a retracting copper idea. This tester functions by injecting the warmth onto the tested rock and afterwards the gadget determines the quantity of warm that it performs. Nevertheless thermal conductivity testers works best to identify diamonds as well as its various other simulants, it will not aid distinguish lab developed or synthetic stones. To be able to determine these, specific optical methods are required. Laboratories make use of methods such as spectroscopy, microscopy as well as luminescence in order to establish a particular stones origin. The ordinary individual could make use of loupes and microscopic lens to differentiate synthetic stones. Natural diamonds generally have minor imperfections and also imperfections such as incorporations or some sort of foreign product, which will certainly not be located in synthetics.

gold necklace with small diamond

Grading Rough Diamonds!

University Place

Interaction rings are offered in a range of designs, stones, cuts and forms. Amongst all the sorts of rocks utilized in involvement rings, rubies are the most priceless as well as ideal ones. Their shimmer truly has the ability to win a female's heart. There is a remarkable collection of ruby involvement rings offered in the marketplace. Some of the rings are designer productions, which are created based on the consumer's selection. They could likewise be called tailored diamond interaction rings. Several of the jewelry experts provide the consumers with the skill of seasoned developers to bring magic to the otherwise routine functions and forms.

Designer diamond engagement rings are not just created inning accordance with the option of client but likewise match their budget. These rings are cost effective, as compared with the other ruby involvement rings. The customers could pick their very own ring setups as well as match the diamonds, to develop a special piece of precious jewelry for enjoyed ones. A lot of the developer ruby interaction rings are made in white gold, yellow gold and platinum. Apart from the settings and also diamond selection, there are a number of other information that play a crucial duty in making a ring. Aside from picking a certain style, it is essential for the purchasers to bear in mind the different mixes of designs. The size, thickness and precise size of the rings are additionally essential and should be taken into account while creating a ruby interaction ring. Many of these rings take around 6 to 8 weeks to be made.

Developer diamond interaction rings are great options, as compared to the readymade rings conveniently offered. These rings offer more contentment to the buyers and also are unique, owing to the individual touch. They provide the purchaser to work with the style and selection of stone and personalize the development.

___________________________________________

Vintage Wedding Rings in Washington

Jewelers in University Place

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  University Place, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in University Place, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in University Place. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in University Place to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in University Place for you engagement or wedding.

marriage rings

University Place How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

bezel set diamond earrings

What Are Color Boosted Diamonds as well as Are They For You?

University Place

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Vintage Wedding Rings in Washington