Unique Wedding Rings in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

three diamond engagement ring

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

How are ruby cut grades designated?

This is where points begin to obtain made complex. The methods made use of to quantitatively assess the top quality of a cut vary. The way the GIA establishes what a diamond's cut quality must be, for instance, varies in very particular means from the way other certifiers like the AGS do it. In many cases, these organizations do not divulge the precise details of the processes they use.

The form of a diamond also makes a distinction with respect to exactly how its cut grade is figured out. Although there are some standard standards that remain the same for any type of kind of ruby, the specific techniques utilized to quality a round diamond's cut are various from those utilized to quality a heart-shaped diamond's cut.

The rest of this description will concentrate on round diamonds, as this is without a doubt the most typical ruby shape. One of the elements impacting the cut grade of a round ruby is the variety of elements it has. Aspects are the level, specified areas on the surface of a diamond. The elements on round diamonds are normally triangular. Presently, it's believed that the perfect round ruby must have 33 facets on the crown (the section of the ruby that rests above the band, which itself is the best factor of the diamond) and 25 on the structure (the reduced, much longer section of the ruby). When there are imperfections externally of the ruby, cutters could include additional aspects in order to cover them. This results in a deterioration in the general high quality of the cut.

While the aspect matter is generally decideded upon as a great way of evaluating the top quality of a ruby cut, there are other factors on which gemologists frequently differ. A few of the other elements used by some authorities in order to help establish cut grades include the elevation of the ruby's crown, the depth of the pavilion, the diameter of the table (the top of the crown), as well as the angles of the crown and also pavilion.

The American Criterion criteria for round diamonds asks for a crown height of 16.2%, pavilion deepness of 43.1%, and table size of 53% of the total band size. The Suitable Fantastic benchmark, nonetheless, asks for 19.2% crown elevation, 40% structure depth, and 56.5% table size. While these differences may be difficult for amateurs to determine, they are a good image of the problems linked with producing a simple analysis of a diamond's cut.

Although there are some arguments regarding the specific proportions that constitute the best diamond cut, for possible ruby customers, one of the most crucial thing to understand is that ruby certifications offered by companies like the AGS and GIA are reliable as well as meaningful. Credible ruby suppliers base the rates at which they deal diamonds on the cut in addition to the remainder of the "four Cs." When you acquire a ruby, you don't need to stress over the understanding of just what makes a good ruby cut altering a lot that the worth of your diamond will be considerably affected.

Which diamond cut quality represents the most effective worth?

Which kind of ruby is best for you greatly depends on your spending plan. For purchasers that want to buy them, suppliers usually suggest rubies with the greatest feasible cut qualities. Nonetheless, this may be due to some self-involvement on their part.

The other 3 Cs have an influence on diamond prices also, so it could be hard to determine the specific difference in price in between an Ideal or Exceptional cut ruby and also a Great cut. For laid-back purchasers and budget-conscious capitalists alike, rubies with an Excellent or Good cut grade can stand for an excellent value. This is because, while they could be extra economical compared to or else equal Suitable or Exceptional cut rubies, the noticeable distinction in top quality is marginal.

At the exact same time, do not hesitate to use your discernment. If, for instance, you find a diamond with a Perfect reduced score which has excellent ratings in the other groups as well as is still within your budget, then you need to definitely consider it, as long as you're handling a credible supplier.

gold necklace with small diamond

The Best Ways To Get Diamonds When Buying Wholesale.

Reston

There are a variety of styles of interaction rings of 2018 that are unbelievably stylish. Whatever from lead ruby rings and also colored stones to "green" rings and also network established diamond rings ended up being incredibly popular in 2018.

Pave diamond rings are rings with three or four rows of little, even-sized rubies that typically go around the entire ring. A bigger center rock set over the remainder of the ring finishes the appearance. Pave diamond interaction rings are among the very best involvement rings of 2018 since they are a classy selection for an engagement ring while producing a great deal of shimmer on a soon-to-be bride's third finger. You'll also find lead ruby wedding bands that match your involvement ring as well as make it much more sparkly.

Colored stones have likewise expanded in appeal. Due to this, rings with tinted rubies are among the most effective interaction rings of 2018. Rubies can be found in a variety of colors, consisting of yellow, blue, pink, as well as even black. Real tinted diamonds are very uncommon, makings them exceptionally costly. A one-carat colored ruby could run upwards of 10 thousand dollars. However, if you could not pay for to invest this much loan on an involvement ring, there are a number of alternatives that will certainly still enable you to be stylish with a colored stone. With the current innovation, you could acquire a man-made tinted ruby. With the advancements that have actually been made, lots of people could not tell the difference in between a mined diamond as well as a manufactured one. If you purchase or appoint a manufactured ruby, you can choose whichever shade you favor, and save a number of countless dollars in the meantime. Alternatively, if you desire a tinted stone however don't need a diamond, emeralds, sapphires, and rubies make wonderful options for engagement rings as well as are much much less expensive compared to extracted tinted diamonds.

Environment-friendly engagement rings are additionally among the ideal involvement rings of 2018. With more people worried concerning the setting and regarding the human legal rights issues that border standard diamond mining, even more individuals are looking for choices to standard engagement rings. One possibility is to get an involvement ring that has a ruby that was mined in Canada rather of South Africa. Canada doesn't have the very same civils rights issues rotating around its ruby market, so it's considered to be more pleasant to the world. Alternatively, getting a manufactured diamond ring is likewise taken into consideration to be a lot more "environment-friendly" since not just does it not have the same human rights problems that mined rubies do, yet it does not ruin the earth like mining for rubies tends to do. Conversely, the very best interaction rings of 2018 include antique interaction rings given that the greenest engagement rings are those that are reused and also recycled. By buying an interaction ring that is antique, you are not contributing to the brand-new diamond ring market or the devastation of the atmosphere.

Channel set diamond rings are additionally on the list of ideal involvement rings of 2018. Network collection involvement rings have the stones set within the band of the ring, so the top of the stone is despite having the top of the ring. Network set rings are specifically optimal due to the fact that the diamonds are shielded from being harmed because you could not get to the rock to chip them. Also more preferred are network set diamond rings made out of platinum, which has actually lately expanded in appeal. If you wish to get a ring that is a lot more special, though, you can have a network set interaction ring established with rocks besides diamonds. Sapphires are a particularly prominent selection for interaction rings.

___________________________________________

Rose Gold Diamond Necklace in Virginia

2 Karat Diamond Stud Earrings in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

pear diamond solitaire

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

channel set diamonds

Begin With the Basics When Interested in Buying Ruby Precious Jewelry.

Reston

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

3 Stone Diamond in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

10 ct ring

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

rose gold morganite halo engagement ring

Beginning With the Basics When Fascinated in Getting Diamond Precious Jewelry.

Reston

Rubies are normally offered in a very large range of colors. Lots of people know concerning anemic rubies and also GIA's color grading system that is made use of to categorize a diamond's body color ... you recognize D, E, F, etc. This shade grading system is only utilized to identify one of the most usual ruby body color of yellow nevertheless anytime a ruby is found in one more shade like pink, blue, eco-friendly, etc.; then this diamond is described as a "" fancy diamond"".

Natural Fancy rubies can be very expensive and often times extra costly compared to a similar dimension anemic ruby. An excellent instance of a Fancy diamond is the infamous 45.52 carat fancy deep blue diamond, the Hope Diamond, which is on screen in the Smithsonian Nature Museum in Washington, DC.

A shade improved ruby is a 100% all-natural ruby that has actually had its shade changed. And most importantly, color improved diamonds come in an extremely wide choice of shades at extremely economical prices!

A little history- For lots of, several years it has actually been popular that a ruby's color might be "" enhanced"" by placing a little colored substance externally of a diamond and similar to magic ... a ruby that had a visible yellowish shade would change to a much more eye-catching near colorless diamond. Sadly, this kind of shade improved diamond can change back to its initial body color if this colored material was unintentionally gotten rid of. In more current years, the modern technology of color boosted diamonds has actually gone extremely advanced. It is now feasible to totally change the color of a ruby! These processes are taken into consideration permanent due to the fact that it does remain stable when subjected to day-to-day normal problems. The color will not discolor if exposed to sunshine or be cleaned off by extreme chemicals.

Just how is it done? The wanted outcome of any one of these treatments is to have an extra marketable diamond. A much less marketable ruby would be a diamond that has a low body shade or sometimes a lower quality. The color boosted diamond therapy business recognize if they start off with a particular kind of ruby as well as procedure it for a specific amount of time that they must wind up with a particular shade but it does not constantly work by doing this. This is a scientific research that does need some art in their procedures ... the only procedure that gives regular outcomes is the finishing process.

The three processes are as follows- Process # 1- HPHT Color Improved Diamonds- High Stress/ High Temperature (HPHT) treatment could improve the color of particular types of brown diamonds and also hence boost their worth. General Electric has developed a process that virtually is a mechanical simulation of a diamond's development in nature. The color enhanced ruby will be warmed up to an extremely heat under a very high, stabilized stress. Mistakes in the crystal structure are after that rearranged resulting in an alteration of the ruby's shade. Because the problems of HPHT are really just like ruby's initial development, just a well geared up lab will be able to positively recognize this sort of shade enhanced ruby. HPHT was initially made use of to turn yellow-colored rubies into even more valuable fancy colored improved rubies, and now it is likewise utilized to transform some undesirable brownish diamonds into more preferable colorless tinted improved diamonds.

Process # 2- Irradiated Shade Improved Diamonds- OK ... do not start obtaining all excited due to the fact that you saw the word irradiated! This is a 100% safe procedure that is extremely much like just what is utilized to preserve food by exposing it to a stream of Gamma rays. The shade improved diamond process is carried out in numerous various ways however the outcomes are all the very same. You start with a reduced color (P, Q, R, etc.) 100% all-natural ruby that has already been reduced as well as polished, after that it is revealed to a stream of fast electrons. During this component of the procedure the diamond will certainly resort to a really dark shade since a few of the atoms in the diamond's crystal structure have now been dislocated and this consequently has actually affected the means light travel through the ruby. Next the ruby undergoes a controlled home heating (annealing) process, this permits several of those atoms to transfer (partly repaired) in order to get a desired color.

Process # 3- Coated Shade Improved Diamonds- The finishing on sleek rubies refers to a slim artificial layer that alters the color of the diamond. The finishing can either be of the preferred shade or can create a tinted interference-effect. Regrettably in some cases this procedure is done to trick a buyer. It is a relatively easy procedure to carry out, it has actually been around for several years (although the coatings products are better now), and also it does not require a great deal of expensive high tech tools. Lately, I've seen some pink layered diamonds on the market, they are very attractive ... and of training course you would need to acquire them recognizing that they have actually been covered and also follow your jewelry expert's guidelines about having and also looking after these shade improved diamonds. The coating could be applied to the whole of a ruby's surface, simply the base of the ruby, or to a narrow area near the band. A well-applied layer can transform the shade by several color grade. Some coverings can be eliminated with steaming in acid, strong cleaning services, and even home chemicals. In some cases dots or larger areas of purple or blue ink are painted on the diamond to help combat a yellowish color. The ruby's setting will generally cover the dots, so they are difficult to see in a placed stone.

So, is a shade improved ruby right for you? Perhaps ... all-natural expensive color rubies could be stunning but they are pricey! Color improved diamonds are affordable as well as enable lots of people to own a brightly tinted ruby. Ask your local jeweler if they have any Fancy rubies ... either natural or shade enhanced rubies. It is constantly interesting, and also fun, to consider something different!

Under normal wear the irradiated and also HPHT shade boosted rubies will have no worry of the color fading away. The only consideration will certainly be when you need to have any kind of type of solution done on the piece of jewelry. If this sort of color improved diamond is subjected to too much amounts of heat it could impact the shade. The jewelry expert will should understand that the ruby is a shade boosted diamond prior to any work is done then the jewelry expert will certainly have the ability to select the ideal program of activity. Color boosted diamonds are now likewise made use of as the tiny accent diamonds around a bigger colorless ruby. There are numerous amazing items of jewelry offered with little blue, yellow, black, or green color improved rubies.

Currently that you know about shade improved rubies and also a person aims to sell you on what they call a natural expensive tinted ruby but it is at a very bargain rate ... you will certainly know that something simply does not seem right regarding the deal. A report from a respected grading lab should come with natural Fancy colored rubies that are marketed as all-natural. If you deal with a trusted company and you have actually been assured about just what you are purchasing, after that you will certainly lessen the opportunity of something negative taking place to you. Similar to any situation including a pricey acquisition of something that few individuals are experienceded in, education must be an important part of your plan. This is much more crucial if you intend to purchase a shade boosted ruby. Bud Boland has actually remained in the jewelry company for 40 years and also has done whatever from watchmaking, ruby setup, fashion jewelry production, and has actually been a Jeweler for virtually 35 years. He is a Graduate Gemologist from GIA (Gemological Institute of The U.S.A.), which is likewise the location where he was an Instructor. He has actually educated regarding rubies to thousands of trainees from around the world

___________________________________________

Rose Gold Diamond Necklace in Virginia

Heart Diamond Wedding Ring in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

round engagement rings

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

For centuries, diamond has been used as an epitome of true love. It reflects love, affection, security, trust and a life long commitment. When you gift a diamond to a woman, let it be in the form of diamond engagement ring, you need not say the rest. It will make others understand that how much serious you are for her. It will portray your love in the best possible manner.

You can find a variety of diamond engagement rings at online jewelry stores. These diamond engagement rings come in many shapes and styles. It is apt to choose diamond as the stone for these engagement rings because diamond is considered beautiful and it is also the hardest of all substances present on the earth. This is primarily the reason why people consider it ominous and feel that wearing diamond can bring same kind of good luck in their lives. This has made diamond engagement ring, diamond solitaire ring, designer engagement ring, diamond engagement ring platinum, discount diamond engagement ring a pre determined gift for those involved in love.

Out of all rings, a ring with solitaire is considered the most appropriate symbol which can depict your love. The attraction with the solitaire is incomparable. Diamond solitaire rings are set in a prong setting with 4 to 8 claws. Prongs can mostly be seen in platinum, yet another very beautiful and attractive metal. In most of the cases platinum is considered, as it is generally thin, and makes the diamond more visible.

Then there is yet another form of diamond engagement rings, which is attractive as well as romantic. It is known as past, present future ring. These rings define love as eternal and something which was in the past will be in the present and will be there in the future. The ring actually consists of three stones of diamond. The design of the ring can be like a center piece of diamond with two pieces around, or the three pieces of diamond clustered together. Side stone diamond engagement rings are also one style of engagement rings, which is elegant. This type of engagement ring is basically attractive as well as elegant.

They go well for working women.

Then there are antique diamond rings. These are also called Victorian rings. The designs of these rings are just like what was prevalent in the past. These diamond rings also look well if they go with some other stones. And if you want to give something priceless and sentimental to your lover, then you can gift her ancestral ring. Ancestral ring is the ring of your family, coming down since past. This ring must have been worn by your mother and grandmother. These rings are high in sentimental value and thus are considered priceless. Bit if you do not have such a family ring, then there is nothing to be upset over. You can buy for your fiancé or your wife unique engagement rings; who knows, one day; this ring can becomes an ancestral ring for your family.

So, what are you waiting for? If you are planning to walk the aisle with hand in hand with your lover, then begin the process by gifting her a diamond engagement ring. After all, diamonds are a woman's best friend.

engagement rings

Ways To Purchase Diamonds When Getting Wholesale.

Reston

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia

2 Ct Diamond Bracelet in Reston

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Reston, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Reston, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Reston. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Reston to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Reston for you engagement or wedding.

3 stone diamond

Reston How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

There are a number of styles of engagement rings of 2018 that are exceptionally trendy. Every little thing from lead diamond rings as well as tinted stones to "eco-friendly" rings and network established diamond rings ended up being popular in 2018.

Pave diamond rings are rings with 3 or four rows of small, even-sized diamonds that normally walk around the whole ring. A larger center stone set over the remainder of the ring finishes the appearance. Lead diamond engagement rings are just one of the most effective engagement rings of 2018 due to the fact that they are a sophisticated option for an engagement ring while developing a great deal of glimmer on a soon-to-be bride's third finger. You'll likewise locate pave diamond wedding event bands that match your interaction ring and also make it even much more sparkly.

Colored rocks have actually additionally expanded in popularity. Due to this, rings with colored diamonds are among the most effective involvement rings of 2018. Rubies are available in a range of shades, consisting of yellow, blue, pink, as well as black. Real colored diamonds are very uncommon, that makes them very expensive. A one-carat colored diamond could run upwards of ten thousand bucks. Nevertheless, if you could not manage to invest this much money on an engagement ring, there are a pair of alternatives that will still enable you to be stylish with a tinted stone. With the most current innovation, you could purchase a man-made colored ruby. With the breakthroughs that have actually been made, the majority of people could not tell the distinction between an extracted diamond and a manufactured one. If you acquire or commission a man-made diamond, you can pick whichever shade you prefer, and also save numerous thousands of dollars in the meantime. Conversely, if you desire a tinted stone but do not require a diamond, emerald greens, sapphires, as well as rubies make fantastic options for engagement rings and also are much more economical compared to mined colored rubies.

Environment-friendly engagement rings are also amongst the best interaction rings of 2018. With more people worried regarding the atmosphere as well as regarding the civils rights concerns that surround standard ruby mining, more individuals are searching for alternatives to typical interaction rings. One opportunity is to purchase an interaction ring that has a diamond that was extracted in Canada rather than South Africa. Canada doesn't have the very same civils rights issues revolving around its diamond market, so it's thought about to be more friendly to the world. Conversely, getting a manufactured diamond ring is likewise considered to be much more "eco-friendly" due to the fact that not just does it not have the same human legal rights issues that extracted diamonds do, yet it doesn't damage the planet like mining for rubies has a propensity to do. Additionally, the very best involvement rings of 2018 consist of antique involvement rings considering that the greenest engagement rings are those that are recycled and also recycled. By purchasing an involvement ring that is antique, you are not contributing to the new ruby ring market or the damage of the atmosphere.

Network set ruby rings are also on the list of finest engagement rings of 2018. Network collection engagement rings have the rocks set within the band of the ring, so the top of the stone is despite the top of the ring. Network set rings are particularly perfect due to the fact that the rubies are secured from being harmed since you can not reach the stone to chip them. A lot more prominent are channel collection ruby rings made out of platinum, which has actually just recently expanded in appeal. If you wish to acquire a ring that is also a lot more special, however, you could have a channel collection involvement ring established with stones various other compared to rubies. Sapphires are a specifically prominent choice for involvement rings.

3 stone diamond ring yellow gold

What You Had to Know When Acquiring a Ruby Ring

Reston

Not all vendors offer ruby grading laboratory reports (aka ruby high quality records) to their customers. So my general recommendations to you is to keep your money in your pocket when managing such jewelers.

Just purchase a ruby engagement ring if it includes the original ruby high quality report.

A lab record is an independent analysis of the 4Cs of a loose diamond as well as includes a plotted layout of the stone's quality attributes as well as a graphic representation of the stone's percentages. Having such a record allows you to contrast rubies of various high qualities and also ultimately assists you make a more educated acquiring choice.

A merchant might cut corners as well as not provide a lab record or an unethical vendor could provide a phony one due to the moment, problem as well as expenditure he'll birth to obtaining a rock graded.

Yeah - there is a price for rating a diamond (though that expense is at some point paid by the consumer), plus the delivery and also insurance policy costs for sending out the ruby to the lab. And also let us not forget the opportunity cost of a jewelry expert not having the ruby in his store up for sale for a few weeks while the grading occurs.

Nonetheless, a diamond grading record might also not be available due to the fact that the expenses to getting one might influence also heavily on the final price of the ring. For instance, a 0.3 ct ruby ring setting you back $250 claim, could set you back around $75 to be graded and also have the report number engraved on the band on the ruby. As you look for that excellent diamond involvement ring for your sweetie, you'll discover that there is an alphabet soup of laboratories claiming to provide trusted ruby rating records. However I would only put my loan on ...

The Premier Diamond Grading Lab Information

Yes, all ruby high quality records are not produced equal. Within the industry, it is a consensus that the 2 leading labs are GIA-GTL (Gemological Institute of The U.S.A.'s Treasure Trade Lab) and also the AGS (American Gem Society Laboratories).

The GCAL (Treasure Qualification and also Guarantee Laboratory) additionally supplies very concerned records or "ruby certifications" as they are described by GCAL. The GIA has the greatest global reputation for independence and consistency. Due to their constant shade and quality strictness guidelines, the globe's biggest and also most expensive diamonds have been sent out there for rating years. In 2006, GIA-GTL added a two-dimensional cut grading system for rounded great rubies.

AGS utilizes the most strict cut criteria in the industry. It utilizes a three-dimensional light performance metric that can quality numerous diamond forms. Actually, it is the only cut grading system that is recognized by the scientific area.

Exactly what is more, its Ruby Quality Paper makes use of a distinct and also exclusive 0 to 10 grading system to assess the 4 Cs - a system which is less complicated to understand compared to GIA's grading system. In reality, AGS also goes the added step by relating their 0-10 rating scale to other types of score. As an example, the traditional VS1 ruby clarity score is a 3 on the AGS Ruby Quality Paper.

Diamond Coverage - The Drawbacks

1. Ruby grading is not standardized or controlled and also thus you may discover tier 2 laboratories that utilize looser standards to the rate 1 grading labs mentioned above. If you purchase a diamond that has been graded by a rate 2 lab, you may wind up paying extra for a lesser high quality diamond. So for instance, a ruby ranked a "F" in shade at a tier 2 lab may get a G, H, or reduced color rating at a more respectable lab. The market likewise marks down diamonds rated by minimal well-known laboratories by about 15-30% or more. So either you just acquire a diamond rated by a tier 1 laboratory or you approve that you could be getting a lesser high quality ruby compared to just what is specified on the record if that ruby is rated by a lesser recognized laboratory.

2. Numerous large chain stores have massive agreements with lesser known labs with "softer" diamond grading guidelines. Several of these softer labs put "recommended substitute values" on the laboratory records - values which are greater than just what stores means sell the rubies for. So a salesman in a store may claim to you, "Look at the lot you are obtaining here. We are selling you this ruby engagement ring for $2500 yet the report states that the recommended replacement worth is $4000." Wow - just what an offer - NOT! This is why it is much better that you rely on just independent rate 1 labs.

Also keep in mind that reputable diamond grading records are not appraisals and don't provide evaluation numbers. Diamond evaluations are often blatantly filled with air and are not something you'll wish to count on.

3. Diamond records are riddled with please notes that specify that nothing is "accredited" or guaranteed and that the laboratories are not responsible for errors. In fact, the GIA offers a please note of types on their web site pertaining to using the word "license." The site says:

"It is inaccurate to state that pupils, grads, their companies, or certain gems are "accredited" by GIA. The Gemological Institute of America does not certify any individual or anything. Neither a trainee nor a grad who has actually been awarded a certificate or diploma, nor a treasure which has actually been graded or determined by GIA has actually been certified by GIA".

So it is possible that you the consumer is left holding the bag needs to a mistake in a report is later on discovered. Courts have often ruled that sellers, not laboratories, are in charge of such errors. Why? Due to the fact that the labs indicated ahead of time that their records couldn't be held liable.

Luckily, there are a couple means to offer yourself much more buyer security:

A. You might fly to India where jewelers provide a lifetime buyback plan to their consumers. As well pricey to fly?

B. You can discover one of the 20% of US jewelers that sell totally bound rubies. These are rubies that are offered with life time damage, life time trade-in and also life time buyback policies.

C. Not as good a solution as purchasing a completely adhered diamond but you might buy a ruby that has a real "certification" and not a report. "Certified rubies do have guaranties" albeit for much shorter durations.

Accreditation Some vendors describe a "diamond record" as a "licensed ruby" but technically this is not deal with. From a legal standpoint, a ruby record is a merely a professional viewpoint though in truth, elements of a diamond rating report are not simply point of views.

As an example, a diamond's carat (weight) could be accurately established along with its cut grade by gauging its optical effectiveness or by describing a computer model. A certificate on the various other hand is a statement of reality - a paper for which the issuer approves legal responsibility and will make restitution to the customer for blunders.

Some top ruby grading labs offer both records and certificates. AGS offers Diamond High quality Papers (non-certified reports) and likewise Diamond High quality Certificates. Ruby Top quality Certificates are prepared exclusively for AGS retail jewelers and provides guaranties from taking part American Gem Culture participant shops.

GCAL accredits it's ruby grading likewise. Its 100% money-back assurance plan is legitimate for a duration of two years from the date on the relevant certificate. This policy ensures the precision of the cut, shade and also quality qualities as well as the carat weight.

A record or certificate ought to will certainly have a number on it that could or may not be etched on a ruby. You will certainly have the ability to get in that number on the site of the certifying laboratory to inspect a record's credibility.

Components Of A Ruby Grading Report Diamond grading reports are always developing but particular component must stay the same. As an example, the:

The Record #. This number is offered and also videotaped in a laboratory's document and also may or might not be engraved on a ruby's girdle. You can enter the report number on a grading lab's site to examine the authenticity of the ruby quality report or to obtain more details regarding the diamond. Shape & Aspect Design: This is the overview and also the cutting design used for the facet arrangement. There are 3 basic facet styles - "great cut, step cut as well as mixed cutting style" and 12 fundamental shapes which consist of notables such as round great and princess cut" rubies.

Measurements: This describes dimension (not weight) of a ruby. Dimension consists of measurements such as size, width, weight as well as size. A dimension is generally noted to the hundredth of a millimeter. Dimensions play a massive function in exactly how a diamond sparkles.

Carat weight Weight: The weight of a ruby is measured to the hundredth of a carat weight as well as some even offer such measure to the thousandth of a carat weight (1.123 ct.). Carat is one of the most objective and the most convenient to comprehend of the 4Cs due to the fact that all one has to do is weight the rock. Color Quality: This informs you the level of shade lack in the diamond. The less color the higher the quality.

Rubies are normally rated from D-Z; the closer to "D" the whiter the ruby. You need to never see diamond shade array such as (G-H, I-J-K, and so forth) on a diamond report. You must only see color ranges on evaluations for stones that are placed.

Clearness Grade: Essentially every diamond has actually inner flaws called inclusions and also outside imperfections called imperfections. A diamond is rated according to the size, type, location and amount of these problems.

Quality qualities vary from Perfect (FL) - Consisted Of. Labs utilize a couple experts to quality the clearness of a ruby in order to create a more accurate reading.

Cut Grade: A lot more recent ruby reports consist of a cut grade for standard round brilliant rubies. Cut takes right into consideration the brilliance, fire as well as scintillation of the diamond. Cut grade ranges from Excellent - Poor.

Other elements you may stumble upon on a diamond report include the gloss, balance, fluorescence and also proportion. Equipped with this info, you are much better able to make an analysis of the quality of ruby that is placed in an engagement ring.

___________________________________________

Rose Gold Diamond Necklace in Virginia