Princess Cut Diamond Rings in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

10 ct ring

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Not all sellers offer diamond grading laboratory records (also known as ruby quality records) to their customers. So my general advice to you is to keep your money in your pocket when managing such jewelry experts.

Just acquire a ruby involvement ring if it includes the original ruby quality report.

A lab report is an independent evaluation of the 4Cs of a loose ruby and also includes a plotted representation of the rock's clearness characteristics as well as a visuals representation of the stone's percentages. Having such a report permits you to contrast rubies of various high qualities and eventually assists you make an even more educated buying choice.

A merchant may cut corners and also not give a lab report or an underhanded seller may give a fake one since of the moment, problem and expense he'll bear to getting a rock rated.

Yeah - there is a price for grading a diamond (though that price is eventually paid by the customer), plus the delivery and insurance policy charges for sending out the ruby to the laboratory. And allow us not forget the opportunity cost of a jeweler not having the diamond in his shop available for sale for a couple of weeks while the grading happens.

Nevertheless, a diamond grading record could also not be readily available due to the fact that the costs to obtaining one could influence also heavily on the last cost of the ring. For instance, a 0.3 ct diamond ring costing $250 say, might cost around $75 to be rated and have the report number inscribed on the band on the diamond. As you look for that ideal diamond engagement ring for your sweetie, you'll locate that there is an alphabet soup of laboratories declaring to offer trustworthy diamond grading records. But I would only put my cash on ...

The Premier Ruby Grading Laboratory News

Yes, all diamond top quality records are not created equal. Within the sector, it is an agreement that the 2 top laboratories are GIA-GTL (Gemological Institute of America's Treasure Trade Lab) as well as the AGS (American Treasure Culture Laboratories).

The GCAL (Treasure Accreditation and also Assurance Lab) likewise supplies extremely related to records or "ruby certifications" as they are referred to by GCAL. The GIA has the greatest international credibility for self-reliance and also consistency. Due to their continuous shade as well as quality strictness standards, the globe's biggest and also most expensive diamonds have actually been sent out there for grading years. In 2006, GIA-GTL added a two-dimensional cut grading system for round great diamonds.

AGS utilizes the strictest cut standards in the sector. It makes use of a three-dimensional light performance metric that can quality a number of ruby shapes. In reality, it is the only cut grading system that is identified by the scientific community.

What is more, its Ruby Top quality Record uses a special as well as proprietary 0 to 10 grading system to evaluate the 4 Cs - a system which is much easier to comprehend than GIA's grading system. In truth, AGS also goes the added action by equating their 0-10 rating range to other forms of ranking. For instance, the conventional VS1 ruby clarity rating is a 3 on the AGS Diamond High Quality Paper.

Diamond Reporting - The Drawbacks

1. Ruby grading is not standard or regulated and also therefore you could find rate 2 laboratories that employ looser guidelines to the tier 1 grading labs discussed above. If you buy a diamond that has actually been rated by a rate 2 laboratory, you could wind up paying much more for a lesser high quality diamond. So for instance, a ruby ranked a "F" in shade at a tier 2 laboratory could get a G, H, or lower color ranking at a more respectable laboratory. The industry additionally discounts diamonds graded by lesser recognized laboratories by about 15-30% or more. So either you just get a ruby graded by a tier 1 lab or you approve that you may be buying a lower high quality ruby than just what is stated on the record if that ruby is rated by a lesser well-known laboratory.

2. Lots of big chain shops have massive agreements with minimal well-known laboratories with "softer" ruby grading guidelines. A few of these softer laboratories put "suggested substitute worths" on the laboratory records - values which are higher than what stores plans sell the diamonds for. So a salesperson in a chain shop might claim to you, "Take a look at the lot you are obtaining here. We are selling you this diamond involvement ring for $2500 but the report says that the recommended substitute worth is $4000." Wow - just what a bargain - NOT! This is why it is better that you rely on just independent tier 1 laboratories.

Also remember that reputable ruby rating records are not appraisals and do not provide assessment figures. Diamond evaluations are commonly blatantly inflated as well as are not something you'll desire to rely upon.

3. Ruby records are filled with disclaimers that specify that nothing is "licensed" or assured which the labs are not responsible for mistakes. Actually, the GIA supplies a please note of sorts on their website regarding making use of the word "accredit." The website states:

"It is incorrect to state that students, graduates, their businesses, or certain gems are "certified" by GIA. The Gemological Institute of The U.S.A. does not accredit any individual or anything. Neither a pupil neither a grad who has been granted a certificate or diploma, neither a treasure which has been rated or identified by GIA has been certified by GIA".

So it is feasible that you the customer is left holding the bag should an inaccuracy in a record is later uncovered. Courts have often ruled that vendors, not laboratories, are responsible for such errors. Why? Due to the fact that the labs showed in advance that their records could not be held responsible.

Fortunately, there are a couple means to provide on your own more purchaser defense:

A. You might fly to India where jewelers use a life time buyback plan to their clients. Also pricey to fly?

B. You can locate one of the 20% of United States jewelers who market fully bound diamonds. These are diamonds that are sold with lifetime damage, life time trade-in and life time buyback plans.

C. Not as great a remedy as acquiring a fully bonded ruby however you can purchase a ruby that comes with a real "certification" and not a record. "Qualified rubies do feature warranties" albeit for much shorter durations.

Qualification Some vendors refer to a "diamond record" as a "certified ruby" however practically this is not fix. From a lawful point ofview, a diamond report is a just an expert viewpoint though in truth, aspects of a diamond rating report are not simply opinions.

For instance, a diamond's carat (weight) can be accurately figured out as well as its cut grade by gauging its optical effectiveness or by describing a computer version. A certificate on the other hand is a declaration of fact - a record for which the company accepts lawful responsibility as well as will certainly make restitution to the consumer for mistakes.

Some leading ruby grading labs offer both reports and certifications. AGS offers Diamond Quality Files (non-certified records) as well as Ruby High quality Certificates. Diamond Top quality Certificates are prepared solely for AGS retail jewelry experts and also uses guaranties from participating American Treasure Society participant shops.

GCAL licenses it's diamond grading additionally. Its 100% money-back guarantee policy is legitimate for a period of 2 years from the day on the appropriate certification. This plan makes certain the accuracy of the cut, shade and also clarity qualities as well as the carat weight.

A record or certificate ought to will certainly have a number on it that may or could not be etched on a ruby. You will have the ability to go into that number on the website of the licensing lab to examine a report's legitimacy.

Elements Of A Ruby Grading Record Diamond rating reports are always advancing but particular element ought to continue to be the exact same. For circumstances, the:

The Report #. This number is provided and also tape-recorded in a laboratory's record and might or may not be inscribed on a diamond's band. You can enter the record number on a rating lab's internet site to check the authenticity of the ruby high quality record or to obtain more info concerning the diamond. Forming & Element Style: This is the summary and also the cutting design made use of for the aspect arrangement. There are 3 standard aspect styles - "fantastic cut, step cut as well as mixed cutting design" as well as 12 standard shapes which include notables such as round brilliant and also princess cut" diamonds.

Measurements: This describes size (not weight) of a ruby. Size includes dimensions such as size, size, weight and diameter. A dimension is usually detailed to the hundredth of a millimeter. Dimensions play a significant duty in just how a diamond sparkles.

Carat weight Weight: The weight of a ruby is measured to the hundredth of a carat weight as well as some also provide such action to the thousandth of a carat weight (1.123 ct.). Carat is one of the most unbiased and also the most convenient to recognize of the 4Cs because all one needs to do is weight the stone. Color Grade: This informs you the degree of shade lack in the diamond. The much less color the higher the quality.

Diamonds are generally graded from D-Z; the closer to "D" the whiter the ruby. You should never ever see ruby color variety such as (G-H, I-J-K, and also so on) on a diamond report. You should only see shade ranges on assessments for rocks that are placed.

Clearness Quality: Virtually every diamond has actually inner flaws called inclusions and also exterior flaws called imperfections. A diamond is rated according to the size, type, location as well as quantity of these problems.

Quality grades vary from Perfect (FL) - Consisted Of. Labs use a couple experts to grade the clarity of a ruby in order to think of a more accurate reading.

Cut Grade: Extra recent ruby reports consist of a cut grade for common round fantastic rubies. Cut considers the brilliance, fire as well as scintillation of the diamond. Cut quality varies from Superb - Poor.

Other components you might stumble upon on a diamond report consist of the gloss, balance, fluorescence and also percentage. Equipped with this details, you are better able to make an assessment of the high quality of ruby that is mounted in an interaction ring.

channel set diamonds

Phony Or Actual Ruby And Also Is This Right For You

Ringgold

You have actually been dating the person of your desires for rather time currently. You might or may not be staying with each other as a pair, either of both has its very own connection issues; if you do not live as a couple, the feeling of loneliness that surges via your heart whenever your partner claims the words "excellent bye" after a charming day well invested with each other influences you to do more as well as every time you turn incorrectly to show to him or her your sensations, the void that welcomes you, promptly turns your ideas to do more into a resolve to do even more now! For those who have actually taken their partnerships an action further by relocating with each other.

Because of the solitude really felt each time a partner states excellent bye, different kinds of stress and also sensations embeded in they can be the should make your love authorities for the entire globe to see or you both intend to start a stable family members. Whatever encourages you right into ultimately making the primary step to one of the most important dedication you would ever before make in your entire life could not be off relevance however the symbol which you have to provide while taking this step is of the utmost relevance - "The Involvement Ring".

Today acquiring an engagement ring has now end up being the status of recognizing yourself as one who is currently taken and ready for marital relationship however have you ever before had fun with the rock or band on your hand and considered its background? Given that it's not defined in the scriptures or the oldest files that offer comprehensive accounts of practices prior to marital relationship in time passed.

The popular involvement ring of the contemporary age had its beginning as recent as the 19th century and had not been constantly an icon of undying love, it was basically the initial part settlement of the new bride price to be paid to the bride-to-be's household yet turned over as well as worn by the bride. It was a kind of insurance coverage given for the lady, in instance the potential companion which was constantly the man back then disbands the marital relationship thereby jeopardizing the woman's merit as well as attract other males.

Real meaning and symbol of the engagement ring began shining through in the 20th century, when males offered their fiancées a band that symbolized their love and also intents for a marital relationship union, the engagement ring signified that she had been taken, out of limitations and also ready to be wed to her real love and also it was positioned on the fourth finger of the left hand, for that finger was believed to have a blood vessel going through it which came straight from the heart as a result representing the finger as a "heart finger". Earlier rings could just be an item of silver or an iron band without any kind of adornment, which the lady inserts right into her 4th finger on her left hand, this was the practice momentarily till business rings and the media took control of the involvement scene. The Adverts shown on engagement rings in the center of the 19th century recommended that men ought to invest no much less than 2 months of their monthly revenue to buy the ideal ring for his precious bride to be as well as just with an advert the definition and design of the engagement ring took a brand-new instructions. The modern-day involvement ring is a sign that reveals that an individual is engaged to be married snappy. The cut, prices and also construct from the involvement ring although not very important, includes a particular flavour to your engagement day or event and has scoffed a new jewellery market all by itself. The Interaction ring now can be found in different styles; it can be a band constructed from valuable products such as Gold, Platinum or Silver or maybe a band tied with gem rocks to offer an irresistible appeal to the ring. The various major designs of interaction rings will be talked about below.

Various Kinds Of Involvement Rings

Solitaire rings; these are the ultimate classic engagement rings, the jewelry ring consists of a band and a treasure rock; the band could be made from any product of your choice varying from gold to platinum while the gems must likewise be preferred to fit your strange characteristics, maybe diamonds or pearl cut in various manner ins which would be discussed below.

Engagement Rings with Side rocks: These elegant rings are made with gems put into the sides of the band, which could be constructed from any kind of metal material depending upon your taste. Some side rocks call also included a main stone at the middle. The preferred gems utilized for this design of rings are typically rubies however you can personally tailor your gemstone to the taste of your love.

The 3 Rock Rings or the Trinity ring: this is a ring layout with its own romantic background, it is believed that each rock in the 3 stone ring represents the past, existing and also future of the time in which a couple has actually spent with each other and the ring would certainly bind them together for all infinity. The ring design is that of a spotless platinum band with three exquisite gemstones; one at the middle with two location purposefully by the sides. The gems are typically crazy of diamonds however you are permitted to tailor your own into three different types of gemstones if you so wish.

The Matching Bridal Establish: this is a lovely combination of both the interaction ring as well as the real wedding event band, there is no set style on how a matching wedding set ought to resemble but it is typically great to have either the involvement ring or the wedding ring highlighting the various other and the other way around I.e. a splendid platinum engagement ring with a gems ought to be coupled with a simple Gold timeless wedding event band, supplying the bride-to-be with a touch of colour. Stress Rings: allow the name not act as an obstacle to you when thinking about the tension ring for it is one of those layouts we call basic but forever classy, it contains a band made from any type of product of your selection, tightly holding a gems in its grasp with stress i.e. the gemstone is not held by prongs however clasped between both sides of the band material you picked. The band material serves as its holding assistance. It is extremely recommended you choose two contrasting colours for the band and also the gemstone to draw out the real charm of the tension ring.

The Different Cuts of Gems

The Cushion cut: this approach of cutting a gems, offers the stone a timeless form that is in between a rectangle and an oval, it is among one of the most popular jewellery cuts and it's likewise called the antique cut.

The Marquise cut: the technique used in reducing the shape of the marquise cut gives the gemstone an oval form in the center with ends. This ring has a timeless elven or need to I say natural appearance that draws out the superordinary appeal in your bride-to-be.

The Emerald cut: the emerald gem normally has its very own specified shape and also this cut technique plainly mirrors it, the emerald cut is a rectangle-shaped cut with cropped corners extending at its four ends.

The Asscher cut: this approach of reducing the gems offers it a form people say is similar to the emerald rectangular shape but it is a lot more octagonal in form compared to rectangular shape, the octagonal shape aids it capture light as well as show it in various instructions. It's a perfectly attractive cut for a rings gems.

The Princess cut: this is just one of one of the most pre-owned cuts on gems, it is square in shape and helps highlight the charm of the gems made use of quite demurely. The Round cut: this cut basic looks round however its more than that for it has various spikes included in its surfaces making it among, otherwise the most shining gemstone cut of the lot, it is understood among females for its capacity to blind the eye (sparkle).

The Heart cut: perfect for the romantics in mind and also shaped to stomach their hearts, it is an easy and also elegant cut that is fairly preferred amongst ladies. After providing a basic expose on involvement ring designs and also cuts, the following action is to offer your notification the leaders in the industry that provides you with the very best and also most pricey rings- in some situations- around.

Costs Barnes: the manufacturers of several of one of the most elegant as well as expensive interaction bands out there. Tiffany: everyone knows the name Tiffany this designer house likewise offers customers with top of the array rings and also rates defer. Tacori: the Tacori style is also one of the most demanded involvement rings in the jewellery market the cut as well as plan of its layouts are always a delight to behold.

In picking a ring your spending plan need to also enter into play so either you purchase Tiffany's or a typical interaction ring, it's the idea that counts.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Diamond Necklace Womens in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

wedding bands

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Just how are ruby cut qualities assigned?

This is where points begin to obtain made complex. The approaches made use of to quantitatively analyze the quality of a cut vary. The method the GIA identifies exactly what a ruby's cut grade need to be, for instance, varies in really details means from the means various other certifiers like the AGS do it. Most of the times, these companies do not divulge the precise details of the processes they make use of.

The form of a ruby additionally makes a difference with respect to just how its cut grade is figured out. Although there are some fundamental criteria that remain the very same for any type of sort of diamond, the specific techniques made use of to grade a round diamond's cut are different from those used to grade a heart-shaped ruby's cut.

The remainder of this description will concentrate on rounded rubies, as this is without a doubt the most typical ruby shape. One of the factors influencing the cut grade of a rounded diamond is the number of facets it has. Aspects are the level, defined areas externally of a diamond. The aspects on round rubies are generally triangular. Currently, it's thought that the suitable round ruby should have 33 elements on the crown (the area of the ruby that rests over the band, which itself is the largest point of the ruby) and also 25 on the pavilion (the reduced, longer section of the diamond). When there are blemishes externally of the diamond, cutters might include additional facets in order to cover them. This causes a deterioration in the total top quality of the cut.

While the element matter is typically agreed after as a great way of judging the top quality of a ruby cut, there are other points on which jewelers frequently disagree. Several of the other factors used by some authorities to assist determine cut grades consist of the elevation of the ruby's crown, the deepness of the structure, the size of the table (the top of the crown), and also the angles of the crown as well as pavilion.

The American Standard standard for rounded rubies calls for a crown elevation of 16.2%, pavilion deepness of 43.1%, and also table size of 53% of the complete band diameter. The Suitable Brilliant standard, nevertheless, calls for 19.2% crown height, 40% pavilion depth, and 56.5% table size. While these distinctions could be challenging for amateurs to discern, they are an excellent picture of the problems linked with producing an easy evaluation of a diamond's cut.

Although there are some disputes as to the exact percentages that constitute the excellent ruby cut, for prospective diamond purchasers, the most important thing to understand is that diamond qualifications supplied by organizations like the AGS as well as GIA are credible and significant. Reliable ruby suppliers base the prices at which they acquire and also sell rubies on the cut along with the remainder of the "four Cs." When you buy a diamond, you don't have to stress over the perception of what makes an excellent ruby cut transforming a lot that the value of your diamond will certainly be significantly influenced.

Which diamond cut grade represents the ideal worth?

Which kind of diamond is best for you mainly depends upon your budget plan. For customers that want to purchase them, vendors normally recommend rubies with the highest feasible cut qualities. Nonetheless, this might be due to some self-interest on their component.

The various other three Cs have an influence on ruby prices too, so it could be tough to determine the specific distinction in rate between a Perfect or Excellent cut diamond as well as an Excellent cut. For laid-back purchasers and also budget-conscious capitalists alike, rubies with a Great or Great cut quality could stand for an outstanding value. This is because, while they can be extra budget-friendly compared to otherwise equal Perfect or Superb cut diamonds, the noticeable distinction in high quality is marginal.

At the same time, do not hesitate to use your discernment. If, for instance, you discover a diamond with an Ideal cut score which has great ratings in the other classifications and is still within your budget, then you should absolutely consider it, as long as you're dealing with a respectable vendor.

rose gold morganite halo engagement ring

The Big 4 Cs For Loose Diamonds

Ringgold

To begin our function on various sorts of gems, we will begin with the very best as well as most popular gemstone of them all the diamond. The ruby is the best gems. It has really few weaknesses and also numerous strengths. It sparkles with its remarkable worth and sentimental worth. It is used in wedding rings to stand for unlimited love or made use of as gifts/jewelry to be provided to loved ones. Yet the ruby is a lot greater than its timeless elegance.

The diamond acquires its name from the Greek job adamas meaning unsurpassable. In solidity, there is no comparison. The ruby rates in the Mohs range a 10 which is the hardest substance on Earth. Its reducing resistance is 140 times that of the ruby and sapphire, the gems(Diamond) that are following in the Mohs scale in hardness. The ruby's optical properties such as appeal and inflexibility make it special and also conveniently identified from various other imitations. Take pleasure in!

* Background of Diamonds

The initial taped ruby go back around 800 B.C. in India. Some believe it also went back 6,000 years earlier. The rubies were utilized as ornamental functions as well as as talismans to prevent wicked and also provide protection in fight. Throughout the Dark Ages, rubies were also stated to be used as a clinical help. Spiritual doctors even informed patients that if they hold a diamond in a hand and make the indication of the cross would certainly, it would heal and also disease and recover wounds.

Diamonds ended up being much more prominent during the 19th century as a result of discovery of diamond down payments in South Africa. This discovery leads to raised supply, enhanced cutting and also brightening techniques, and development in economy. In 1979, geologists discovered the Argyle pipeline in Australia which to this date is the wealthiest diamond down payment worldwide. Argyle, because after that, alone is in charge of supplying over one third of the globe's rubies each year.

* Diamonds: Just how are they created?

Rubies contains an allotrope of carbons that are developed in high-pressure, high-temperature conditions. Rubies are generated 90 miles under the Earth's surface at temperatures of about 2200 degrees Fahrenheit. Rubies are created deep within the planet and at some point, over very extended periods of time, push their method to the earth's surface, generally via volcanic eruptions.

The age of these rubies from beneath the surface area of the planet are from 1 to 3.3 billion years old! When diamonds are formed and begin their ascent to the planet's surface area, they go with networks where the magma from the volcano rises to the surface, getting rubies in the process and ultimately depositing them externally, where they are at some point located and also extracted.

* The 4 C's of Diamonds

There are four distinctive characteristics that figure out the value and quality of a diamond. These are the color, cut, quality as well as carat. Or else known as the 4 C's of a ruby. In the complying with, we will certainly speak about these functions in information.

* Shade

In the last e-newsletter, we touch based on the color of gemstones as being the most vital feature as a result of the truth that color is the most obvious feature. The perfect ruby should show up clear and also anemic but this is not the situation for all diamonds. Rubies can can be found in any type of color of the rainbow most common shade is a color of yellow or brownish. The Geological Institute of The U.S.A.(GIA) have actually devised a standard to quality ruby color. This guideline is composed of a text system that ranges from the alphabet D - Z. Please see below:

D E F No Shade G H I J Almost Anemic K L M Faintly colored, can't rarely be seen and normally yellow in color N O P Q R Lightly tinted, typically yellow. Can be seen with the naked eye S T U V W X Y Z Tinted, begins with yellow and also proceeds to brown

* Clearness

The cut a ruby is determined by the diamond's percentage such as its form, size as well as depth. The cut identifies just what is called the diamond's "brilliance". Also if the ruby itself has best shade as well as clarity, with a bad cut the diamond will have a boring brilliance. This is since the cut identifies exactly how light journeys within the diamond. The Gemological Institute of America has actually also developed a quality grading system to rate ruby clarity. This grading system includes Flawless (Fl), Inside Flawless (IF), Really Very A Little Consisted Of (VV1 or VV2), Very A Little Included(VS1 or VS2), Slightly Consisted Of(SI1 or SI2), as well as Included(I1, I2, as well as I3). Although this system had been added to the diamond industry, it is not widely used. This is because of that it took a great deal of practice and training to integrate it.

* Cut

The cut a diamond is established by the diamond's proportion such as its shape, width and also depth. The cut establishes just what is called the ruby's "luster". Even if the diamond itself has best color and also quality, with an inadequate cut the diamond will have a boring luster. This is since the cut establishes exactly how light trips within the diamond.

There are 3 kinds of cuts that could identify the diamond's luster. These are a shallow cut, a cut that is also deep and also ideal cut. A shallow cut is a cut of a diamond that is also reduced, that light traveling with it is lost on the bottom of the stone and also does not come back into sight. This cut makes a ruby appear lifeless and also plain. A cut that is as well deep is a cut that is too expensive, that light taking a trip with it gets away through the sides and also dims the stone. A suitable cut is an ideal cut on a ruby that reflects light to the top of the stone, giving it perfect radiance.

* Carat weight

As mentioned on the last newsletter, a solitary carat weight(ct) considers regarding 200 milligrams or.2 grams. For smaller sized carat diamonds that evaluate much less than a carat weight, it is revealed as factors (pt). Points are 1/100 of a carat. Carat weight of a diamond is necessary because of that bigger diamonds are rarer compared to smaller ones, so basically the larger the ruby the more costly it is. There is no basic grading system or representation that could show various carat weight. This is due to the fact that there are a lot of variations of diamonds fit and also cut, makings rocks of comparable weight, look various.

* Replica Diamonds

Since diamonds are one of the most useful and also rarest of all the gems, initiatives have been made to replicate or also enhance diamonds utilizing cheaper options. A great deal of times, honest blunders have actually been made and these options or other gems such as spinel were occasionally perplexed with actual diamonds. In some situations, some deceitful people aim to sell these choices to misfortunate buyers in order to profit. Listed below we will go over regarding these choices and methods to recognize them.

* Artificial Diamonds

Artificial rubies are rubies that are grown manufactured in a research laboratory. The first known cases of diamond synthesis were claimed to be recorded in between 1879 - 1928, but this was never ever verified. It wasn't until the 1940's where study started in the United States, Sweden, Soviet Union started investigating. Synthetic diamonds are otherwise known as High Pressure High Temperature (HPHT) diamonds or Chemical Vapor Down Payment (CVD) rubies. The name of both these synthetic rubies originates from the procedures utilized to produce them. Some of these synthetic diamonds could either have better, lesser or comparable characteristics than that of a ruby. For that reason, these synthetic diamonds are used for abrasives, reducing as well as polishing devices, as well as switches over in power stations.

* Simulants

Simulants are non-diamond compounds that are utilized to reproduce the look and even the form of a diamond. The most fundamental as well as well understood simulant is cubic zirconia (CZ). CZ at plain sight can sparkle more compared to a diamond and it is much less dense, meaning that a 1 carat weight CZ will be a lot bigger compared to a 1 carat ruby. Nowadays, a much more preferred simulant is moissanite, which has all the exact same qualities of a ruby. These attributes consist of solidity (Moissanite-9.25 and diamond-10 in Mohs scale), refractive index(Moissanite -2.65 and diamond -2.42) as well as diffusion (Moissanite -.104 as well as diamond -.044). This makes it tough to separate the 2 at simple view as well as would usually require testers to tell the distinction. In the following area we will certainly talk about ways to determine moissanites and also other imitations.

* Real or Fake?

An old approach of recognizing diamonds is to do a scratch examination. This requires damaging a diamond with one more diamond which is destructive and is seldom utilized nowadays. The very best and most dependable method to check for rubies is to utilize testers that use thermal conductivity. These testers include battery powered thermistors placed with a retractable copper tip. This tester works by infusing the warmth into the tested rock and then the tool determines the quantity of warm that it performs. However thermal conductivity testers functions best to identify rubies as well as its various other simulants, it will not aid identify laboratory developed or artificial rocks. To be able to identify these, certain optical methods are required. Laboratories use strategies such as spectroscopy, microscopy as well as luminescence in order to determine a particular stones origin. The typical person can use loupes and also microscopic lens to differentiate artificial stones. Natural diamonds typically have small flaws and imperfections such as inclusions or some type of foreign material, which will certainly not be discovered in synthetics.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Anniversary Bands in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

princess cut diamond

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Not all sellers provide diamond grading lab records (also known as diamond top quality records) to their consumers. So my basic guidance to you is to keep your loan in your pocket when managing such jewelry experts.

Just buy a diamond involvement ring if it features the initial ruby high quality report.

A laboratory record is an independent evaluation of the 4Cs of a loose ruby and includes a plotted layout of the rock's quality characteristics and a graphic depiction of the stone's proportions. Having such a report permits you to compare diamonds of various top qualities and ultimately helps you make an even more notified getting decision.

A merchant might reduce corners and not give a lab report or a deceitful vendor could provide a phony one as a result of the moment, trouble and also cost he'll birth to obtaining a rock graded.

Yeah - there is a price for grading a diamond (though that price is ultimately paid by the customer), plus the delivery as well as insurance policy fees for sending the diamond to the lab. And also let us not neglect the opportunity cost of a jeweler not having the diamond in his store to buy for a few weeks while the grading takes location.

Nevertheless, a ruby grading record might also not be available because the expenses to obtaining one could impact as well greatly on the last cost of the ring. As an example, a 0.3 ct diamond ring costing $250 say, may set you back around $75 to be graded as well as have the report number engraved on the band on the diamond. As you search for that ideal diamond involvement ring for your sweetheart, you'll find that there is an alphabet soup of laboratories declaring to offer trustworthy diamond rating reports. However I would just put my cash on ...

The Premier Ruby Grading Laboratory Information

Yes, all ruby top quality reports are not created equivalent. Within the industry, it is a consensus that the 2 leading labs are GIA-GTL (Gemological Institute of The U.S.A.'s Treasure Profession Laboratory) and also the AGS (American Gem Society Laboratories).

The GCAL (Gem Certification as well as Guarantee Lab) also provides highly related to records or "diamond certificates" as they are referred to by GCAL. The GIA has the greatest worldwide online reputation for independence and also consistency. Due to their constant color and also clarity strictness guidelines, the globe's largest and most expensive rubies have actually been sent out there for grading years. In 2006, GIA-GTL included a two-dimensional cut grading system for round dazzling diamonds.

AGS makes use of the most strict cut criteria in the market. It uses a three-dimensional light performance metric that could grade several ruby forms. In truth, it is the only cut grading system that is acknowledged by the clinical area.

Just what is more, its Diamond Quality File utilizes a distinct and also proprietary 0 to 10 grading system to examine the 4 Cs - a system which is less complicated to comprehend compared to GIA's grading system. Actually, AGS even goes the extra action by relating their 0-10 ranking scale to other kinds of ranking. As an example, the traditional VS1 diamond quality score is a 3 on the AGS Diamond High Quality File.

Ruby Reporting - The Drawbacks

1. Ruby grading is not standardized or controlled and also hence you may discover tier 2 labs that employ looser standards to the rate 1 grading labs mentioned above. If you buy a diamond that has actually been graded by a rate 2 laboratory, you could end up paying a lot more for a lesser high quality diamond. So for instance, a diamond rated a "F" in shade at a rate 2 laboratory may get a G, H, or lower shade score at a much more reputable lab. The sector also marks down diamonds rated by lower known labs by concerning 15-30% or more. So either you only purchase a diamond rated by a tier 1 laboratory or you accept that you may be purchasing a lesser quality diamond compared to just what is mentioned on the report if that ruby is graded by a minimal known lab.

2. Numerous large chain stores have massive contracts with minimal recognized labs with "softer" diamond grading standards. Some of these softer laboratories placed "suggested substitute values" on the laboratory records - worths which are greater than exactly what shops means market the rubies for. So a salesman in a store could claim to you, "Check out the terrific offer you are obtaining below. We are offering you this diamond engagement ring for $2500 but the record states that the recommended replacement worth is $4000." Wow - exactly what an offer - NOT! This is why it is better that you rely on just independent rate 1 labs.

Additionally keep in mind that credible diamond rating records are not assessments as well as don't use assessment numbers. Diamond evaluations are usually blatantly filled with air as well as are not something you'll desire to depend on.

3. Ruby reports are riddled with please notes that define that nothing is "licensed" or ensured which the labs are not answerable for mistakes. Actually, the GIA provides a please note of kinds on their site concerning making use of words "accredit." The website states:

"It is incorrect to state that students, graduates, their businesses, or particular gemstones are "licensed" by GIA. The Gemological Institute of The U.S.A. does not license any person or anything. Neither a student nor a graduate that has actually been granted a certification or diploma, nor a treasure which has been rated or identified by GIA has been licensed by GIA".

So it is possible that you the customer is left holding the bag ought to an inaccuracy in a record is later uncovered. Courts have actually often ruled that sellers, not labs, are in charge of such mistakes. Why? Due to the fact that the laboratories suggested ahead of time that their reports couldn't be held liable.

Thankfully, there are a pair means to offer on your own more buyer protection:

A. You can fly to India where jewelers supply a lifetime buyback policy to their customers. Also expensive to fly?

B. You can locate one of the 20% of United States jewelry experts that sell completely adhered rubies. These are diamonds that are sold with lifetime breakage, lifetime trade-in and lifetime buyback plans.

C. Not as good a remedy as getting a completely adhered diamond yet you can acquire a ruby that includes a real "certificate" as well as not a record. "Licensed rubies do feature guaranties" albeit for shorter periods.

Qualification Some vendors refer to a "diamond report" as a "certified ruby" however technically this is not deal with. From a legal perspective, a diamond record is a just a professional point of view though in reality, aspects of a diamond grading report are not simply opinions.

For instance, a diamond's carat weight (weight) can be accurately figured out in addition to its cut quality by gauging its optical effectiveness or by referring to a computer system version. A certification on the various other hand is a statement of reality - a record for which the company approves legal responsibility and will make restitution to the consumer for mistakes.

Some leading diamond grading labs provide both records and certifications. AGS offers Diamond Top quality Records (non-certified records) and Ruby High quality Certificates. Ruby Top quality Certifications are ready exclusively for AGS retail jewelers and also offers warranties from taking part American Gem Society participant stores.

GCAL licenses it's diamond grading also. Its 100% money-back assurance plan is legitimate for a duration of two years from the day on the suitable certificate. This policy guarantees the precision of the cut, color as well as quality grades as well as the carat weight.

A report or certificate must will certainly have a number on it that might or may not be engraved on a diamond. You will have the ability to get in that number on the internet site of the licensing lab to inspect a report's legitimacy.

Elements Of A Ruby Grading Record Ruby rating reports are always advancing however certain component must remain the exact same. As an example, the:

The Record #. This number is provided and tape-recorded in a lab's record and might or could not be inscribed on a ruby's band. You can go into the record number on a grading laboratory's web site to check the authenticity of the diamond quality report or to obtain even more information about the ruby. Forming & Aspect Style: This is the summary and also the cutting design used for the facet setup. There are 3 basic facet designs - "dazzling cut, action cut and also blended cutting style" and 12 basic shapes that include notables such as rounded dazzling as well as princess cut" diamonds.

Dimensions: This refers to dimension (not weight) of a ruby. Dimension consists of dimensions such as length, size, weight as well as diameter. A dimension is usually listed to the hundredth of a millimeter. Measurements play a significant role in exactly how a ruby shines.

Carat weight Weight: The weight of a ruby is gauged to the hundredth of a carat and also some also give such measure to the thousandth of a carat (1.123 ct.). Carat weight is one of the most unbiased as well as the simplest to comprehend of the 4Cs because all one needs to do is weight the rock. Shade Quality: This tells you the degree of shade lack in the diamond. The much less color the greater the quality.

Diamonds are commonly graded from D-Z; the closer to "D" the whiter the ruby. You should never see diamond shade range such as (G-H, I-J-K, and more) on a ruby record. You should just see color varieties on appraisals for stones that are placed.

Clarity Grade: Virtually every diamond has inner flaws called inclusions and also exterior imperfections called imperfections. A diamond is rated inning accordance with the dimension, kind, place and also quantity of these flaws.

Quality grades range from Flawless (FL) - Consisted Of. Labs utilize a pair professionals to grade the clearness of a diamond in order to develop a more exact analysis.

Cut Quality: A lot more current ruby records consist of a cut quality for basic round great diamonds. Cut takes into account the brilliance, fire and also scintillation of the diamond. Cut grade varies from Exceptional - Poor.

Other aspects you might come across on a ruby record include the polish, symmetry, fluorescence and also percentage. Equipped with this information, you are much better able making an analysis of the quality of diamond that is placed in an interaction ring.

three diamond engagement ring

What You Should Know When Buying a Diamond Ring

Ringgold

Interaction rings are readily available in a range of styles, rocks, cuts and shapes. Among all the types of rocks utilized in involvement rings, rubies are one of the most priceless and appropriate ones. Their sparkle really has the capability to win a female's heart. There is a fabulous collection of ruby involvement rings available in the marketplace. Some of the rings are developer developments, which are made according to the consumer's choice. They could also be called personalized diamond interaction rings. A few of the jewelers provide the clients with the skill of experienced developers to bring magic to the otherwise normal functions as well as shapes.

Designer ruby engagement rings are not just designed according to the option of client however likewise match their budget plan. These rings are cost effective, as as compared to the various other ruby involvement rings. The purchasers can pick their own ring settings and also match the rubies, to produce an unique item of fashion jewelry for liked ones. A lot of the developer diamond interaction rings are made in white gold, yellow gold as well as platinum. Apart from the settings and also diamond choice, there are a variety of various other information that play a crucial role in making a ring. Besides selecting a certain design, it is essential for the buyers to keep in mind the various mixes of styles. The width, thickness and specific size of the rings are also important and also need to be taken into consideration while designing a ruby involvement ring. The majority of these rings take around 6 to 8 weeks to be made.

Developer diamond involvement rings are great choices, compared with the readymade rings conveniently readily available. These rings offer even more contentment to the buyers and also are special, owing to the individual touch. They give the purchaser to deal with the layout and also choice of rock and customize the creation.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Eternity Ring in Ringgold

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Ringgold, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Ringgold, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Ringgold. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Ringgold to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Ringgold for you engagement or wedding.

diamond rings

Ringgold How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Involvement rings are offered in a range of designs, stones, cuts as well as shapes. Among all the kinds of stones used in involvement rings, diamonds are one of the most precious and proper ones. Their glimmer really has the ability to win a woman's heart. There is a fantastic collection of diamond interaction rings readily available in the market. Some of the rings are designer developments, which are created based on the consumer's choice. They can likewise be called tailored ruby interaction rings. Several of the jewelry experts provide the clients with the skill of experienced designers to bring magic to the otherwise routine features and also shapes.

Developer diamond engagement rings are not just developed according to the selection of consumer yet also match their budget. These rings are cost effective, as compared with the various other ruby interaction rings. The customers could pick their own ring setups as well as match the rubies, to produce a special piece of precious jewelry for loved ones. The majority of the designer ruby involvement rings are made in white gold, yellow gold as well as platinum. Aside from the settings as well as ruby option, there are a variety of other information that play an essential duty in making a ring. Aside from picking a particular layout, it is very important for the buyers to keep in mind the different combinations of designs. The width, density as well as exact size of the rings are likewise crucial and have to be taken into factor to consider while making a ruby engagement ring. A lot of these rings take around 6 to 8 weeks to be made.

Designer diamond involvement rings are excellent alternatives, as compared to the readymade rings quickly readily available. These rings provide even more satisfaction to the purchasers and also are unique, owing to the personal touch. They offer the customer to work on the style and selection of rock and also individualize the production.

princess cut wedding rings

Exactly how Do You Know If The Ruby Is Fake Or Real Ruby?

Ringgold

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia