Emerald Cut Morganite Rose Gold Ring in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

engagement rings

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

There are a variety of designs of involvement rings of 2018 that are unbelievably trendy. Every little thing from lead ruby rings as well as tinted rocks to "green" rings as well as network set diamond rings became popular in 2018.

Pave ruby rings are rings with three or 4 rows of small, even-sized rubies that usually walk around the whole ring. A larger facility stone set above the rest of the ring completes the appearance. Lead diamond engagement rings are among the most effective engagement rings of 2018 since they are a stylish option for an interaction ring while developing a great deal of glimmer on a future bride's third finger. You'll also locate pave diamond wedding event bands that match your engagement ring as well as make it also more sparkly.

Colored rocks have also expanded in appeal. As a result of this, rings with tinted diamonds are among the most effective engagement rings of 2018. Rubies can be found in a variety of shades, including yellow, blue, pink, as well as black. True colored rubies are exceptionally rare, that makes them very expensive. A one-carat tinted diamond can run upwards of 10 thousand bucks. Nevertheless, if you can not manage to spend this much loan on an involvement ring, there are a number of alternatives that will still permit you to be trendy with a colored rock. With the newest technology, you could purchase a manufactured colored ruby. With the advances that have been made, lots of people can not inform the distinction between a mined diamond and a synthetic one. If you acquire or appoint a manufactured ruby, you can choose whichever color you prefer, as well as save several thousands of dollars in the meanwhile. Alternatively, if you desire a colored stone however do not require a diamond, emerald greens, sapphires, as well as rubies make remarkable options for involvement rings and are much less pricey than mined colored rubies.

Green involvement rings are also amongst the finest interaction rings of 2018. With even more individuals worried regarding the atmosphere as well as regarding the human civil liberties issues that border traditional diamond mining, more individuals are searching for options to standard interaction rings. One possibility is to acquire an interaction ring that has a ruby that was mined in Canada as opposed to South Africa. Canada does not have the very same civils rights problems revolving around its ruby market, so it's considered to be extra pleasant to the globe. Additionally, getting a man-made diamond ring is additionally considered to be a lot more "eco-friendly" due to the fact that not just does it not have the very same civils rights issues that extracted rubies do, but it does not destroy the planet like mining for rubies tends to do. Conversely, the most effective involvement rings of 2018 include antique involvement rings since the greenest interaction rings are those that are reused and also recycled. By getting an involvement ring that is antique, you are not contributing to the new diamond ring market or the devastation of the environment.

Channel established ruby rings are also on the list of finest engagement rings of 2018. Channel collection involvement rings have the rocks established within the band of the ring, so the top of the rock is also with the top of the ring. Network set rings are particularly perfect since the rubies are protected from being damaged since you could not reach the rock to chip them. Even more preferred are network set ruby rings constructed of platinum, which has actually just recently expanded in popularity. If you wish to purchase a ring that is even much more distinct, though, you could have a channel collection interaction ring established with stones apart from diamonds. Sapphires are an especially prominent selection for involvement rings.

3 stone sapphire ring

What You Required To Know When Buying a Diamond Ring

Catharpin

Interaction rings are available in a selection of layouts, rocks, cuts and also forms. Among all the types of stones utilized in engagement rings, rubies are one of the most valuable and appropriate ones. Their glimmer truly has the capacity to win a lady's heart. There is an amazing collection of diamond interaction rings offered in the market. Some of the rings are developer creations, which are created based on the client's option. They can also be called customized diamond engagement rings. Several of the jewelry experts provide the consumers with the skill of experienced designers to bring magic to the otherwise regular functions as well as forms.

Designer ruby interaction rings are not only created inning accordance with the choice of consumer yet likewise suit their budget plan. These rings are economical, as as compared to the various other ruby engagement rings. The buyers could select their very own ring setups and also match the diamonds, to produce an unique piece of precious jewelry for liked ones. The majority of the designer ruby involvement rings are made in white gold, yellow gold and also platinum. Apart from the settings and also ruby option, there are a number of various other details that play a crucial duty in developing a ring. Aside from selecting a certain layout, it is very important for the purchasers to maintain in mind the various combinations of layouts. The width, thickness and precise dimension of the rings are likewise essential as well as should be taken into account while developing a ruby engagement ring. Many of these rings take around 6 to 8 weeks to be made.

Developer ruby interaction rings are great alternatives, compared with the readymade rings quickly offered. These rings offer more contentment to the purchasers and also are unique, owing to the personal touch. They give the purchaser to function on the layout as well as choice of stone and also individualize the creation.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Princess Diamond Ring in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

beautiful engagement rings

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Interaction rings are offered in a selection of designs, rocks, cuts and forms. Among all the sorts of rocks used in engagement rings, rubies are one of the most priceless and appropriate ones. Their shimmer genuinely has the ability to win a woman's heart. There is a remarkable collection of diamond interaction rings readily available on the market. Several of the rings are developer developments, which are made based on the customer's choice. They could likewise be called personalized diamond interaction rings. A few of the jewelry experts provide the consumers with the ability of skilled designers to bring magic to the otherwise normal attributes and also shapes.

Developer diamond interaction rings are not only made according to the option of client however likewise fit their budget. These rings are budget friendly, as contrasted to the other diamond interaction rings. The purchasers can choose their very own ring settings and match the rubies, to develop a special item of precious jewelry for enjoyed ones. A lot of the designer diamond involvement rings are made in white gold, yellow gold and platinum. Other than the setups and diamond selection, there are a number of various other information that play an essential duty in making a ring. In addition to selecting a specific style, it is very important for the buyers to remember the different combinations of styles. The size, density and accurate size of the rings are also important and also must be taken into account while making a ruby involvement ring. Many of these rings take about 6 to 8 weeks to be made.

Developer ruby involvement rings are great choices, compared to the readymade rings easily available. These rings provide even more contentment to the buyers and are special, owing to the individual touch. They provide the customer to work with the style as well as selection of stone and customize the production.

eternity ring

Purchasing Diamonds Online - Is This Online Jeweler Right For You?

Catharpin

Exactly how are diamond cut grades assigned?

This is where points begin to get complicated. The approaches made use of to quantitatively examine the quality of a cut differ. The way the GIA determines exactly what a ruby's cut grade ought to be, for instance, varies in really certain means from the means other certifiers like the AGS do it. In most cases, these companies don't reveal the exact information of the procedures they make use of.

The form of a ruby likewise makes a difference with respect to how its cut grade is identified. Although there are some basic criteria that remain the same for any type of diamond, the precise approaches used to grade a round diamond's cut are various from those used to grade a heart-shaped diamond's cut.

The rest of this description will concentrate on rounded diamonds, as this is by much one of the most typical diamond shape. One of the elements impacting the cut quality of a rounded ruby is the variety of elements it has. Aspects are the flat, specified areas externally of a ruby. The facets on round diamonds are generally triangular. Currently, it's assumed that the optimal round diamond should have 33 facets on the crown (the section of the diamond that sits above the girdle, which itself is the largest point of the ruby) and 25 on the structure (the reduced, longer area of the diamond). When there are blemishes externally of the ruby, cutters might add additional aspects in order to cover them. This leads to a deterioration in the general high quality of the cut.

While the aspect count is typically decideded upon as an excellent way of evaluating the quality of a diamond cut, there are other factors on which gemologists often disagree. A few of the other aspects utilized by some authorities to assist determine cut grades consist of the height of the ruby's crown, the depth of the pavilion, the diameter of the table (the top of the crown), as well as the angles of the crown and also structure.

The American Requirement standard for rounded diamonds calls for a crown elevation of 16.2%, pavilion deepness of 43.1%, as well as table size of 53% of the total band diameter. The Perfect Brilliant standard, however, requires 19.2% crown height, 40% structure deepness, and 56.5% table diameter. While these differences might be tough for novices to determine, they are a great illustration of the problems connected with producing a basic analysis of a diamond's cut.

Although there are some disputes about the exact percentages that make up the ideal ruby cut, for potential ruby customers, one of the most essential thing to comprehend is that diamond certifications supplied by companies like the AGS and also GIA are trustworthy and also purposeful. Reliable diamond vendors base the costs at which they deal rubies on the cut in addition to the remainder of the "four Cs." When you purchase a ruby, you don't have to fret about the perception of just what makes a great ruby cut changing a lot that the worth of your diamond will be dramatically influenced.

Which diamond reduced grade represents the most effective value?

Which kind of diamond is best for you largely depends upon your budget plan. For buyers who agree to acquire them, vendors normally advise diamonds with the greatest feasible cut grades. However, this might be due to some self-interest on their part.

The various other 3 Cs have an influence on ruby rates also, so it could be challenging to assess the exact distinction in price between a Perfect or Outstanding cut ruby and also an Excellent cut. For informal buyers as well as budget-conscious capitalists alike, diamonds with an Excellent or Good cut quality could stand for an outstanding worth. This is because, while they can be much more inexpensive compared to otherwise equal Perfect or Superb cut rubies, the noticeable distinction in high quality is very little.

At the exact same time, feel complimentary to utilize your discernment. If, as an example, you stumble upon a diamond with a Suitable cut rating which has great rankings in the various other groups and is still within your budget plan, after that you need to certainly consider it, as long as you're managing a reliable vendor.

___________________________________________

Rose Gold Diamond Necklace in Virginia

1 Ct Princess Cut Diamond Earrings in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

3 stone halo engagement ring

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

To start our attribute on different sorts of gemstones, we will start with the most effective and most well understood gems of them all the diamond. The ruby is the best gemstone. It has really couple of weaknesses and also numerous staminas. It shines with its remarkable worth and also emotional worth. It is utilized in wedding rings to stand for unlimited love or used as gifts/jewelry to be offered to liked ones. However the diamond is a lot greater than its eternal beauty.

The ruby obtains its name from the Greek work adamas implying irresistible. In firmness, there is no comparison. The diamond prices in the Mohs range a 10 which is the hardest material on Earth. Its cutting resistance is 140 times that of the ruby and also sapphire, the gemstones(Corundum) that are next in the Mohs scale in solidity. The ruby's optical homes such as gloss as well as inflexibility make it distinct and also quickly identified from other replicas. Take pleasure in!

* Background of Diamonds

The first tape-recorded ruby days back around 800 B.C. in India. Some believe it also dated back 6,000 years ago. The rubies were utilized as decorative objectives as well as as amulets to prevent evil as well as give protection in battle. Throughout the Dark Ages, rubies were even stated to be made use of as a clinical aid. Religious physicians also told people that if they hold a diamond in a hand and also make the sign of the cross would certainly, it would cure and also ailment as well as recover wounds.

Rubies came to be extra preferred throughout the 19th century as a result of exploration of diamond down payments in South Africa. This discovery leads to enhanced supply, boosted reducing as well as brightening techniques, and growth in economic climate. In 1979, rock hounds found the Argyle pipeline in Australia which to this day is the richest diamond deposit worldwide. Argyle, because after that, alone is liable for providing over one third of the world's rubies yearly.

* Diamonds: Exactly how are they formed?

Diamonds contains an allotrope of carbons that are created in high-pressure, high-temperature conditions. Diamonds are produced 90 miles under the Earth's surface area at temperature levels of regarding 2200 levels Fahrenheit. Diamonds are developed deep within the earth and also at some point, over exceptionally long durations of time, press their way to the planet's surface area, normally with volcanic eruptions.

The age of these diamonds from beneath the surface area of the planet are from 1 to 3.3 billion years old! When diamonds are formed and also begin their climb to the planet's surface, they experience networks where the lava from the volcano climbs to the surface, getting rubies along the road and ultimately transferring them on the surface area, where they are at some point located as well as extracted.

* The 4 C's of Diamonds

There are four distinct qualities that figure out the worth and high quality of a diamond. These are the shade, cut, clearness as well as carat. Or else called the 4 C's of a ruby. In the complying with, we will certainly speak regarding these functions thoroughly.

* Color

In the last newsletter, we touch based on the color of gems as being one of the most vital function as a result of that color is the most evident attribute. The excellent ruby should appear clear as well as anemic but this is not the instance for all diamonds. Diamonds can come in any color of the rainbow most usual color is a color of yellow or brown. The Geological Institute of The U.S.A.(GIA) have devised a standard to quality diamond color. This guideline is composed of a text system that ranges from the alphabet D - Z. Please see below:

D E F No Shade G H I J Almost Anemic K L M Faintly tinted, can't barely be seen as well as normally yellow in shade N O P Q R Gently tinted, typically yellow. Can be seen with the naked eye S T U V W X Y Z Tinted, begins from yellow and also proceeds to brown

* Clarity

The cut a ruby is figured out by the diamond's proportion such as its form, size and also depth. The cut identifies what is called the ruby's "luster". Also if the ruby itself has perfect shade as well as clarity, with a bad cut the ruby will have a dull brilliance. This is due to the fact that the cut determines exactly how light travels within the ruby. The Gemological Institute of The U.S.A. has likewise designed a quality grading system to rate ruby clearness. This grading system consists of Flawless (Fl), Internally Flawless (IF), Extremely Extremely A Little Included (VV1 or VV2), Really Somewhat Consisted Of(VS1 or VS2), A Little Included(SI1 or SI2), as well as Included(I1, I2, and also I3). Although this system had been contributed to the diamond industry, it is not widely used. This is because of the fact that it took a great deal of method and training to incorporate it.

* Cut

The cut a ruby is established by the ruby's proportion such as its shape, size and also depth. The cut determines exactly what is called the ruby's "luster". Also if the diamond itself has perfect color and also clearness, with an inadequate cut the ruby will certainly have a dull sparkle. This is due to the fact that the cut identifies how light trips within the ruby.

There are 3 types of cuts that could establish the diamond's luster. These are a superficial cut, a cut that is also deep and also excellent cut. A superficial cut is a cut of a diamond that is also low, that light traveling with it is lost on the bottom of the stone and also does not come back right into sight. This cut makes a diamond appear lifeless and dull. A cut that is also deep is a cut that is too expensive, that light taking a trip via it gets away through the sides and also darkens the stone. A suitable cut is a best cut on a ruby that reflects light to the top of the stone, offering it perfect luster.

* Carat

As mentioned on the last e-newsletter, a single carat(ct) evaluates about 200 milligrams or.2 grams. For smaller sized carat diamonds that evaluate less than a carat, it is expressed as points (pt). Points are 1/100 of a carat weight. Carat weight of a diamond is essential due to the fact that bigger rubies are rarer compared to smaller sized ones, so basically the larger the diamond the much more expensive it is. There is no typical grading system or layout that could reveal different carat weight. This is because there are many variants of rubies fit and cut, makings stones of similar weight, look various.

* Replica Diamonds

Considering that rubies are the most important and also rarest of all the gemstones, efforts have actually been made to replicate and even boost rubies using cheaper alternatives. A lot of times, straightforward errors have actually been made as well as these options or other gemstones such as spinel were sometimes confused with actual diamonds. Sometimes, some unethical people aim to offer these choices to misfortunate buyers in order to revenue. Below we will go over about these alternatives and ways to determine them.

* Artificial Diamonds

Synthetic diamonds are diamonds that are grown produced in a lab. The initial well-known cases of ruby synthesis were claimed to be recorded between 1879 - 1928, however this was never ever confirmed. It had not been until the 1940's where study started in the USA, Sweden, Soviet Union began researching. Synthetic diamonds are or else referred to as High Stress Heat (HPHT) rubies or Chemical Vapor Down Payment (CVD) diamonds. The name of both these artificial diamonds originates from the procedures made use of to produce them. A few of these artificial diamonds might either have greater, minimal or similar characteristics than that of a ruby. Consequently, these synthetic rubies are made use of for abrasives, cutting and polishing devices, and switches in power plant.

* Simulants

Simulants are non-diamond substances that are utilized to duplicate the appearance and also the shape of a diamond. One of the most basic and well recognized simulant is cubic zirconia (CZ). CZ at simple sight could sparkle even more compared to a ruby as well as it is less dense, implying that a 1 carat CZ will certainly be much larger compared to a 1 carat weight diamond. Nowadays, an extra popular simulant is moissanite, which has just the same qualities of a ruby. These features include hardness (Moissanite-9.25 as well as diamond-10 in Mohs scale), refractive index(Moissanite -2.65 and diamond -2.42) and dispersion (Moissanite -.104 and also diamond -.044). This makes it hard to differentiate the 2 at plain view as well as would certainly frequently call for testers to discriminate. In the next area we will certainly go over how you can determine moissanites and also various other imitations.

* Actual or Fake?

An old approach of determining diamonds is to do a scrape test. This needs damaging a diamond with one more ruby which is devastating as well as is hardly ever made use of nowadays. The very best as well as most trusted means to examine for rubies is to use testers that make use of thermal conductivity. These testers are composed of battery powered thermistors installed with a retracting copper pointer. This tester functions by infusing the warmth onto the evaluated rock and afterwards the gadget determines the quantity of warmth that it performs. However thermal conductivity testers functions best to distinguish rubies and its other simulants, it will not aid distinguish lab developed or synthetic stones. To be able to recognize these, specific optical methods are required. Laboratories use strategies such as spectroscopy, microscopy as well as luminescence in order to identify a certain rocks beginning. The average person can make use of loupes as well as microscopic lens to differentiate artificial stones. Natural rubies usually have minor blemishes as well as problems such as incorporations or some type of international material, which will certainly not be discovered in synthetics.

princess cut diamond

What You Should Know When Buying a Diamond Ring

Catharpin

To begin our attribute on various kinds of gemstones, we will start with the most effective and also most well known gemstone of them all the ruby. The diamond is the utmost gemstone. It has few weaknesses as well as several strengths. It glows with its remarkable worth and nostalgic value. It is made use of in wedding celebration rings to represent unlimited love or made use of as gifts/jewelry to be given to liked ones. Yet the ruby is so much greater than its eternal charm.

The diamond derives its name from the Greek work adamas suggesting unsurpassable. In solidity, there is no contrast. The ruby prices in the Mohs range a 10 which is the hardest substance on Planet. Its reducing resistance is 140 times that of the ruby and sapphire, the gems(Corundum) that are following in the Mohs range in solidity. The diamond's optical residential properties such as appeal and rigidness make it distinct and also conveniently distinguished from various other replicas. Appreciate!

* Background of Diamonds

The first taped diamond go back around 800 B.C. in India. Some believe it also went back 6,000 years earlier. The diamonds were made use of as decorative objectives and also as talismans to prevent evil and also supply protection in fight. Throughout the Dark Ages, diamonds were even stated to be made use of as a medical aid. Spiritual medical professionals even told people that if they hold a diamond in a hand as well as make the indication of the cross would certainly, it would cure and illness as well as heal injuries.

Diamonds came to be a lot more popular throughout the 19th century because of discovery of diamond deposits in South Africa. This discovery leads to boosted supply, improved reducing and polishing strategies, and development in economy. In 1979, geologists discovered the Argyle pipeline in Australia which to this day is the richest ruby deposit on the planet. Argyle, ever since, alone is liable for providing over one third of the world's rubies each year.

* Diamonds: How are they formed?

Rubies includes an allotrope of carbons that are formed in high-pressure, high-temperature problems. Rubies are generated 90 miles under the Planet's surface at temperature levels of about 2200 degrees Fahrenheit. Rubies are created deep within the planet and also ultimately, over incredibly long periods of time, press their way to the earth's surface area, normally through volcanic eruptions.

The age of these rubies from under the surface area of the planet are from 1 to 3.3 billion years old! When diamonds are formed and begin their climb to the planet's surface area, they experience networks where the lava from the volcano rises to the surface area, grabbing diamonds in the process and at some point transferring them externally, where they are eventually located and also extracted.

* The 4 C's of Diamonds

There are 4 distinct qualities that determine the worth and also high quality of a diamond. These are the shade, cut, quality and also carat. Otherwise referred to as the 4 C's of a ruby. In the complying with, we will certainly discuss these functions thoroughly.

* Shade

In the last e-newsletter, we touch based on the color of gems as being the most important attribute as a result of the fact that shade is the most evident attribute. The ideal diamond must appear clear and also anemic however this is not the instance for all diamonds. Diamonds can come in any type of shade of the rainbow most typical color is a color of yellow or brown. The Geological Institute of America(GIA) have created a guideline to grade ruby shade. This standard is composed of a lettering system that ranges from the alphabet D - Z. Please see listed below:

D E F No Color G H I J Nearly Anemic K L M Faintly tinted, cannot hardly be seen as well as typically yellow in color N O P Q R Gently tinted, generally yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, begins with yellow as well as proceeds to brownish

* Clearness

The cut a ruby is identified by the diamond's percentage such as its form, size and also depth. The cut determines what is called the diamond's "sparkle". Even if the diamond itself has excellent shade and clearness, with a poor cut the ruby will certainly have a dull luster. This is due to the fact that the cut determines exactly how light trips within the ruby. The Gemological Institute of America has also devised a quality grading system to rate diamond quality. This grading system includes Perfect (Fl), Internally Remarkable (IF), Very Very A Little Included (VV1 or VV2), Really Slightly Included(VS1 or VS2), Slightly Included(SI1 or SI2), and also Included(I1, I2, as well as I3). Although this system had been added to the ruby market, it is not commonly made use of. This is due to the truth that it took a lot of practice and training to integrate it.

* Cut

The cut a diamond is figured out by the ruby's percentage such as its form, width as well as depth. The cut establishes what is called the ruby's "sparkle". Even if the ruby itself has best shade as well as clearness, with a poor cut the ruby will certainly have a boring luster. This is due to the fact that the cut determines how light trips within the ruby.

There are 3 kinds of cuts that can figure out the ruby's radiance. These are a superficial cut, a cut that is also deep and also suitable cut. A shallow cut is a cut of a ruby that is also low, that light traveling with it is lost under of the stone as well as does not come back into view. This cut makes a diamond appear lifeless as well as dull. A cut that is also deep is a cut that is also high, that light taking a trip with it runs away through the sides and also darkens the stone. An ideal cut is an excellent cut on a diamond that reflects light to the top of the stone, giving it ideal luster.

* Carat weight

As mentioned on the last e-newsletter, a solitary carat weight(ct) weighs regarding 200 milligrams or.2 grams. For smaller carat diamonds that evaluate much less than a carat weight, it is revealed as points (pt). Factors are 1/100 of a carat weight. Carat weight of a ruby is very important due to that larger rubies are rarer compared to smaller sized ones, so primarily the larger the diamond the a lot more costly it is. There is no basic grading system or representation that could reveal various carat weight. This is since there are so numerous variants of rubies fit and also cut, that makes rocks of similar weight, look different.

* Imitation Diamonds

Since diamonds are one of the most valuable and rarest of all the gems, initiatives have actually been made to duplicate and even boost diamonds using less costly choices. A great deal of times, sincere blunders have been made as well as these choices or various other gemstones such as spinel were occasionally puzzled with actual rubies. Sometimes, some deceitful individuals aim to offer these options to misfortunate purchasers in order to profit. Listed below we will certainly review about these alternatives and means to identify them.

* Synthetic Diamonds

Synthetic diamonds are rubies that are expanded produced in a laboratory. The first well-known cases of ruby synthesis were claimed to be documented in between 1879 - 1928, however this was never validated. It had not been until the 1940's where research began in the United States, Sweden, Soviet Union started researching. Artificial rubies are otherwise called High Stress High Temperature Level (HPHT) diamonds or Chemical Vapor Deposit (CVD) diamonds. The name of both these artificial diamonds stems from the processes made use of to create them. A few of these synthetic rubies could either have greater, minimal or similar qualities compared to that of a diamond. For that reason, these synthetic diamonds are used for abrasives, reducing and also brightening tools, and also switches over in power terminals.

* Simulants

Simulants are non-diamond substances that are used to replicate the appearance as well as the form of a diamond. The most basic and also popular simulant is cubic zirconia (CZ). CZ at simple view can shimmer greater than a diamond as well as it is much less thick, suggesting that a 1 carat weight CZ will be much larger than a 1 carat weight diamond. Nowadays, a much more popular simulant is moissanite, which has all the very same features of a ruby. These attributes include firmness (Moissanite-9.25 as well as diamond-10 in Mohs range), refractive index(Moissanite -2.65 and ruby -2.42) and also diffusion (Moissanite -.104 as well as diamond -.044). This makes it hard to separate both at plain view as well as would frequently require testers to tell the distinction. In the following area we will go over how you can determine moissanites and also various other imitations.

* Real or Counterfeit?

An old technique of recognizing rubies is to do a scratch test. This calls for damaging a diamond with one more diamond which is harmful and is hardly ever used nowadays. The very best and also most trusted means to test for rubies is to utilize testers that use thermal conductivity. These testers include battery powered thermistors placed with a retracting copper tip. This tester functions by infusing the warmth onto the examined stone and after that the gadget determines the quantity of heat that it carries out. Nevertheless thermal conductivity testers works best to distinguish diamonds and its various other simulants, it will certainly not aid differentiate laboratory produced or synthetic rocks. To be able to identify these, certain optical techniques are needed. Laboratories utilize strategies such as spectroscopy, microscopy as well as luminescence in order to establish a specific stones origin. The typical individual can use loupes and microscopes to identify artificial stones. Natural diamonds usually have minor blemishes and flaws such as incorporations or some sort of international product, which will not be located in synthetics.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Male Engagement Rings in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

eternity ring

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Not all sellers provide diamond grading lab reports (also known as ruby high quality records) to their customers. So my basic suggestions to you is to maintain your cash in your pocket when dealing with such jewelry experts.

Just acquire a ruby interaction ring if it has the initial ruby quality record.

A lab report is an independent assessment of the 4Cs of a loosened diamond and consists of a plotted diagram of the rock's clarity characteristics as well as a graphic representation of the rock's proportions. Having such a record enables you to contrast rubies of different top qualities as well as eventually aids you make an even more educated acquiring decision.

A retailer could reduce corners and also not give a lab record or a dishonest vendor might offer a phony one due to the time, difficulty and also expense he'll bear to obtaining a rock rated.

Yeah - there is a rate for grading a ruby (though that cost is ultimately paid by the consumer), plus the delivery as well as insurance fees for sending out the ruby to the lab. And allow us not neglect the chance price of a jewelry expert not having the ruby in his store offer for sale for a couple of weeks while the grading happens.

However, a diamond rating record might additionally not be available because the expenses to obtaining one might affect as well greatly on the last rate of the ring. For instance, a 0.3 ct diamond ring costing $250 state, could cost around $75 to be graded and also have the report number engraved on the band on the diamond. As you look for that suitable ruby involvement ring for your sweetheart, you'll locate that there is a hodgepodge of laboratories asserting to offer trusted ruby rating records. But I would only put my money on ...

The Premier Ruby Grading Laboratory Reports

Yes, all diamond top quality reports are not developed equal. Within the sector, it is an agreement that the 2 premier laboratories are GIA-GTL (Gemological Institute of The U.S.A.'s Treasure Profession Lab) and also the AGS (American Treasure Society Laboratories).

The GCAL (Gem Certification and also Guarantee Laboratory) also provides extremely concerned reports or "ruby certifications" as they are referred to by GCAL. The GIA has the greatest worldwide credibility for freedom and uniformity. Due to their consistent color as well as quality strictness guidelines, the globe's largest and most pricey rubies have been sent there for grading decades. In 2006, GIA-GTL added a two-dimensional cut grading system for round brilliant rubies.

AGS makes use of the strictest cut requirements in the sector. It utilizes a three-dimensional light performance metric that can quality several ruby forms. Actually, it is the only cut grading system that is recognized by the clinical community.

Exactly what is even more, its Ruby High quality Paper utilizes an one-of-a-kind and also exclusive 0 to 10 grading system to evaluate the 4 Cs - a system which is simpler to comprehend than GIA's grading system. Actually, AGS also goes the extra step by equating their 0-10 rating scale to other kinds of rating. As an example, the traditional VS1 diamond clarity ranking is a 3 on the AGS Ruby Quality Record.

Diamond Coverage - The Drawbacks

1. Diamond grading is not standard or regulated and hence you might encounter tier 2 labs that use looser guidelines to the tier 1 grading laboratories pointed out over. If you acquire a diamond that has actually been rated by a rate 2 lab, you might finish up paying a lot more for a lower quality ruby. So for instance, a ruby ranked a "F" in color at a tier 2 lab may get a G, H, or lower color rating at an extra trusted lab. The industry also marks down diamonds rated by lower recognized laboratories by about 15-30% or even more. So either you just buy a ruby graded by a tier 1 lab or you approve that you could be purchasing a minimal quality ruby than what is specified on the report if that ruby is graded by a lower recognized laboratory.

2. Several huge chain shops have significant agreements with lower recognized labs with "softer" diamond grading standards. A few of these softer laboratories placed "recommended replacement worths" on the laboratory records - worths which are above just what stores intends offer the diamonds for. So a salesperson in a chain shop might claim to you, "Take a look at the good deal you are obtaining right here. We are selling you this diamond interaction ring for $2500 but the report states that the recommended substitute worth is $4000." Wow - exactly what an offer - NOT! This is why it is much better that you rely on just independent rate 1 laboratories.

Additionally bear in mind that trusted diamond rating records are not appraisals as well as do not offer appraisal numbers. Diamond appraisals are frequently blatantly inflated as well as are not something you'll want to depend on.

3. Ruby reports are filled with please notes that specify that absolutely nothing is "accredited" or assured which the labs are not liable for mistakes. Actually, the GIA uses a please note of kinds on their web site regarding the use of words "license." The site states:

"It is wrong to state that students, grads, their businesses, or specific gems are "licensed" by GIA. The Gemological Institute of The U.S.A. does not license anybody or anything. Neither a trainee nor a graduate who has actually been awarded a certification or diploma, neither a treasure which has actually been graded or identified by GIA has been accredited by GIA".

So it is possible that you the customer is left holding the bag ought to an inaccuracy in a report is later on discovered. Courts have frequently ruled that sellers, not laboratories, are accountable for such mistakes. Why? Because the labs suggested beforehand that their reports couldn't be held responsible.

Fortunately, there are a pair means to give yourself more buyer defense:

A. You could fly to India where jewelry experts provide a life time buyback policy to their clients. As well expensive to fly?

B. You can discover one of the 20% people jewelers who offer totally bound diamonds. These are rubies that are offered with lifetime damage, lifetime trade-in and also life time buyback plans.

C. Not as excellent a solution as getting a fully adhered diamond yet you could purchase a ruby that features an actual "certification" and not a record. "Qualified diamonds do feature guaranties" albeit for much shorter periods.

Qualification Some vendors describe a "diamond report" as a "qualified ruby" yet practically this is not fix. From a lawful viewpoint, a diamond record is a just a skilled opinion though in reality, aspects of a diamond rating report are not simply opinions.

As an example, a ruby's carat weight (weight) could be properly figured out as well as its cut grade by determining its optical efficiency or by describing a computer model. A certificate on the other hand is a declaration of reality - a paper for which the issuer approves lawful obligation and also will certainly make restitution to the customer for mistakes.

Some top diamond grading labs use both reports as well as certificates. AGS offers Ruby Top quality Records (non-certified records) as well as Ruby Quality Certificates. Ruby Quality Certifications are ready exclusively for AGS retail jewelers and offers guaranties from participating American Gem Society participant stores.

GCAL certifies it's ruby grading additionally. Its 100% money-back assurance plan stands for a duration of 2 years from the date on the applicable certification. This policy makes certain the precision of the cut, color and also quality grades and the carat weight.

A record or certification must will have a number on it that may or could not be engraved on a ruby. You will have the ability to go into that number on the website of the accrediting laboratory to inspect a report's validity.

Components Of A Diamond Grading Report Ruby rating records are always evolving yet particular element ought to continue to be the same. As an example, the:

The Record #. This number is provided and also tape-recorded in a lab's record and also may or might not be engraved on a diamond's girdle. You could get in the record number on a rating laboratory's website to check the authenticity of the diamond top quality record or to get even more info regarding the diamond. Shape & Facet Style: This is the rundown and the reducing style utilized for the element plan. There are 3 basic aspect styles - "great cut, step cut and also combined reducing style" and also 12 standard forms that include notables such as rounded dazzling as well as princess cut" diamonds.

Dimensions: This refers to dimension (not weight) of a ruby. Dimension consists of dimensions such as length, size, weight and also diameter. A measurement is generally provided to the hundredth of a millimeter. Dimensions play a massive duty in just how a ruby sparkles.

Carat weight Weight: The weight of a ruby is determined to the hundredth of a carat and also some even give such step to the thousandth of a carat (1.123 ct.). Carat is one of the most unbiased and also the easiest to comprehend of the 4Cs due to the fact that all one needs to do is weight the stone. Shade Quality: This informs you the level of color absence in the ruby. The much less color the greater the quality.

Rubies are typically graded from D-Z; the closer to "D" the whiter the ruby. You must never see diamond color variety such as (G-H, I-J-K, and so forth) on a diamond record. You must only see shade varieties on appraisals for rocks that are installed.

Quality Grade: Virtually every ruby has internal blemishes called incorporations as well as external flaws called blemishes. A diamond is graded inning accordance with the dimension, kind, area and amount of these problems.

Quality qualities range from Perfect (FL) - Included. Labs make use of a pair specialists to grade the quality of a ruby in order to think of a more accurate reading.

Cut Quality: Extra current diamond records consist of a cut grade for conventional round dazzling rubies. Cut takes right into factor to consider the luster, fire and also scintillation of the ruby. Cut grade varies from Superb - Poor.

Other components you may encounter on a diamond report include the polish, proportion, fluorescence and also proportion. Equipped with this info, you are much better able to earn an evaluation of the top quality of ruby that is placed in an engagement ring.

white gold tennis bracelet

What You Should Know When Buying a Diamond Ring

Catharpin

There are a number of designs of engagement rings of 2018 that are incredibly trendy. Every little thing from lead ruby rings as well as tinted rocks to "environment-friendly" rings and network established diamond rings became popular in 2018.

Lead diamond rings are rings with three or four rows of tiny, even-sized diamonds that normally go around the whole ring. A bigger center rock set over the remainder of the ring finishes the appearance. Lead ruby interaction rings are among the very best involvement rings of 2018 due to the fact that they are a classy choice for an involvement ring while producing a whole lot of sparkle on a future bride-to-be's ring finger. You'll also discover lead diamond wedding event bands that match your interaction ring and make it even a lot more sparkly.

Colored rocks have actually also expanded in popularity. Due to the fact that of this, rings with colored diamonds are among the best interaction rings of 2018. Diamonds can be found in a range of shades, including yellow, blue, pink, and also also black. True tinted diamonds are exceptionally uncommon, which makes them extremely expensive. A one-carat colored diamond could run upwards of ten thousand dollars. Nonetheless, if you can not pay for to spend this much money on an engagement ring, there are a number of options that will certainly still allow you to be stylish with a colored stone. With the current technology, you can acquire a manufactured tinted diamond. With the breakthroughs that have actually been made, the majority of individuals could not inform the difference between a mined diamond and also a synthetic one. If you acquire or commission a manufactured ruby, you could select whichever shade you prefer, as well as save several countless bucks in the meanwhile. Alternatively, if you desire a tinted stone but don't require a ruby, emerald greens, sapphires, and rubies make terrific options for engagement rings and also are much less costly than extracted tinted rubies.

Green involvement rings are also amongst the best interaction rings of 2018. With more individuals concerned concerning the environment as well as regarding the civils rights concerns that border typical diamond mining, more people are seeking choices to typical engagement rings. One opportunity is to acquire an interaction ring that has a diamond that was mined in Canada rather than South Africa. Canada does not have the same civils rights problems revolving around its ruby market, so it's thought about to be extra friendly to the world. Additionally, buying a synthetic diamond ring is additionally taken into consideration to be more "environment-friendly" since not just does it not have the same civils rights issues that mined rubies do, yet it does not destroy the planet like mining for rubies has a tendency to do. Conversely, the best interaction rings of 2018 include antique interaction rings given that the greenest interaction rings are those that are reused as well as recycled. By buying an involvement ring that is antique, you are not adding to the brand-new ruby ring market or the devastation of the atmosphere.

Channel set ruby rings are also on the list of best involvement rings of 2018. Channel collection interaction rings have actually the stones set within the band of the ring, so the top of the rock is despite the top of the ring. Channel set rings are particularly ideal since the rubies are secured from being damaged due to the fact that you can not obtain to the rock to chip them. A lot more popular are network set ruby rings constructed out of platinum, which has recently grown in appeal. If you desire to get a ring that is a lot more one-of-a-kind, though, you can have a channel set interaction ring set with stones various other compared to rubies. Sapphires are a specifically prominent selection for interaction rings.

___________________________________________

Rose Gold Diamond Necklace in Virginia

Pear Engagement Rings in Catharpin

5 Tips on What To Look For When Buying Diamonds For Wedding Rings

A wedding, or an engagement in  Catharpin, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.

For anyone looking for precious diamonds for engagement rings and wedding rings in Catharpin, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.

Consider the Diamond Cut

1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Catharpin. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.

Diamond Color

2.  Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.

Clarity Diamonds can also be chosen based on their clarity levels.

3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.

Consider the Diamond’s Carat Weight

4.  Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.

Ask for Proof of Certification

5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Catharpin to show you the copy of diamond certification.

With these tips, you should be able to make the right choice when buying precious diamonds in Catharpin for you engagement or wedding.

1 ct wedding band

Catharpin How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

rose gold morganite halo engagement ring

How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond

Catharpin

In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.

FACTOR 1: CARAT WEIGHT

People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.

A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.

FACTOR 2: SHAPE

Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.

There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.

While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.

Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.

FACTOR 3: CUT

"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.

FACTOR 4: CLARITY

Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.

There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.

FACTOR 5: COLOUR

The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.

Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.

Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.

FACTOR 6: FLUORESCENCE

Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.

However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.

Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.

FACTOR 7: GRADER

This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.

The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.

EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.

Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.

SELECTING YOUR DIAMOND

You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.

If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.

___________________________________________

Rose Gold Diamond Necklace in Virginia