5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Youngstown, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Youngstown, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Youngstown. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Youngstown to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Youngstown for you engagement or wedding.
Youngstown How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
To begin our attribute on various sorts of gems, we will start with the very best and also most well recognized gemstone of them all the ruby. The diamond is the best gemstone. It has few weaknesses as well as many strengths. It glows with its remarkable worth and also nostalgic value. It is utilized in wedding rings to stand for unlimited love or used as gifts/jewelry to be given to enjoyed ones. Yet the diamond is a lot more than its eternal elegance.
The diamond obtains its name from the Greek job adamas suggesting unequalled. In hardness, there is no contrast. The ruby rates in the Mohs scale a 10 which is the hardest compound on Earth. Its cutting resistance is 140 times that of the ruby and also sapphire, the gems(Corundum) that are following in the Mohs range in hardness. The diamond's optical residential or commercial properties such as appeal and also rigidity make it one-of-a-kind and also conveniently differentiated from other replicas. Enjoy!
* Background of Diamonds
The first tape-recorded ruby days back around 800 B.C. in India. Some think it also went back 6,000 years ago. The diamonds were made use of as ornamental objectives as well as additionally as amulets to prevent bad and give protection in battle. During the Dark Ages, rubies were even mentioned to be used as a medical aid. Spiritual medical professionals also told clients that if they hold a diamond in a hand and also make the indicator of the cross would, it would heal and also health problem and recover wounds.
Rubies ended up being a lot more prominent throughout the 19th century due to discovery of diamond deposits in South Africa. This exploration causes enhanced supply, enhanced cutting and brightening techniques, and growth in economic climate. In 1979, geologists discovered the Argyle pipeline in Australia which to this date is the richest ruby deposit on the planet. Argyle, because after that, alone is liable for providing over one third of the globe's rubies yearly.
* Diamonds: Just how are they developed?
Rubies contains an allotrope of carbons that are formed in high-pressure, high-temperature problems. Rubies are generated 90 miles under the Planet's surface area at temperatures of about 2200 degrees Fahrenheit. Diamonds are created deep within the earth and also ultimately, over incredibly lengthy durations of time, push their means to the earth's surface, typically through volcanic eruptions.
The age of these rubies from under the surface of the earth are from 1 to 3.3 billion years old! When diamonds are formed and begin their climb to the earth's surface area, they experience channels where the lava from the volcano increases to the surface area, grabbing diamonds along the way as well as at some point transferring them on the surface, where they are at some point found and also extracted.
* The 4 C's of Diamonds
There are 4 distinct features that determine the value as well as top quality of a diamond. These are the color, cut, clearness and carat weight. Otherwise known as the 4 C's of a ruby. In the following, we will speak about these features in information.
In the last e-newsletter, we touch based on the shade of gemstones as being one of the most important feature as a result of that color is one of the most evident function. The perfect ruby ought to appear clear and also anemic however this is not the instance for all diamonds. Diamonds can be available in any color of the rainbow most usual shade is a shade of yellow or brown. The Geological Institute of The U.S.A.(GIA) have devised a standard to quality diamond shade. This guideline contains a lettering system that varies from the alphabet D - Z. Please see below:
D E F No Shade G H I J Virtually Colorless K L M Faintly colored, can't hardly be seen and normally yellow in shade N O P Q R Gently tinted, normally yellow. Could be seen with the naked eye S T U V W X Y Z Tinted, starts from yellow as well as progresses to brownish
The cut a diamond is established by the ruby's percentage such as its form, width and also depth. The cut determines exactly what is called the ruby's "radiance". Even if the diamond itself has best color and quality, with a poor cut the diamond will have a boring brilliance. This is since the cut identifies how light trips within the ruby. The Gemological Institute of The U.S.A. has actually likewise developed a quality grading system to place diamond clearness. This grading system consists of Perfect (Fl), Inside Perfect (IF), Extremely Extremely Somewhat Consisted Of (VV1 or VV2), Extremely Somewhat Included(VS1 or VS2), Slightly Included(SI1 or SI2), and also Included(I1, I2, and also I3). Although this system had been added to the ruby sector, it is not widely made use of. This is due to the fact that it took a whole lot of technique as well as training to integrate it.
The cut a ruby is established by the diamond's proportion such as its shape, size as well as deepness. The cut identifies what is called the diamond's "radiance". Also if the ruby itself has ideal shade and also clearness, with a bad cut the diamond will have a dull sparkle. This is because the cut determines just how light travels within the ruby.
There are 3 types of cuts that could establish the diamond's sparkle. These are a superficial cut, a cut that is unfathomable and optimal cut. A superficial cut is a cut of a ruby that is as well reduced, that light taking a trip through it is lost under of the stone as well as does not return right into view. This cut makes a ruby appear drab and also plain. A cut that is unfathomable is a cut that is expensive, that light taking a trip with it escapes through the sides and also dims the rock. An ideal cut is a best cut on a diamond that mirrors light to the top of the rock, offering it perfect brilliance.
* Carat weight
As stated on the last newsletter, a single carat(ct) evaluates regarding 200 milligrams or.2 grams. For smaller sized carat diamonds that evaluate much less than a carat weight, it is shared as factors (pt). Points are 1/100 of a carat. Carat weight of a ruby is very important due to that larger rubies are rarer compared to smaller ones, so primarily the bigger the ruby the more pricey it is. There is no basic grading system or diagram that could reveal various carat weight. This is because there are so lots of variants of rubies in form and cut, makings stones of similar weight, look various.
* Replica Diamonds
Given that rubies are one of the most valuable and also rarest of all the gemstones, efforts have been made to replicate and even boost diamonds using much less costly options. A great deal of times, straightforward blunders have been made and also these options or other gems such as spinel were often perplexed with genuine diamonds. In some situations, some dishonest individuals attempt to sell these choices to misfortunate customers in order to earnings. Listed below we will certainly discuss regarding these choices and methods to identify them.
* Synthetic Diamonds
Synthetic rubies are rubies that are expanded made in a research laboratory. The very first recognized instances of diamond synthesis were declared to be recorded in between 1879 - 1928, but this was never confirmed. It wasn't up until the 1940's where study started in the United States, Sweden, Soviet Union began researching. Artificial rubies are otherwise known as High Pressure Heat (HPHT) diamonds or Chemical Vapor Down Payment (CVD) diamonds. The name of both these artificial diamonds originates from the processes used to produce them. Several of these artificial rubies might either have better, minimal or comparable features than that of a ruby. As a result, these artificial rubies are utilized for abrasives, cutting as well as brightening tools, and changes in power plant.
Simulants are non-diamond compounds that are made use of to duplicate the look as well as the shape of a ruby. The most fundamental as well as popular simulant is cubic zirconia (CZ). CZ at simple view could shimmer more than a diamond and it is less dense, suggesting that a 1 carat weight CZ will certainly be a lot larger compared to a 1 carat weight diamond. Nowadays, a more preferred simulant is moissanite, which has just the same qualities of a diamond. These characteristics include firmness (Moissanite-9.25 as well as diamond-10 in Mohs scale), refractive index(Moissanite -2.65 as well as ruby -2.42) and diffusion (Moissanite -.104 and also diamond -.044). This makes it hard to differentiate the 2 at simple sight and would often require testers to discriminate. In the next area we will certainly go over ways to identify moissanites as well as other replicas.
* Actual or Phony?
An old technique of determining rubies is to do a scrape test. This requires scratching a ruby with another diamond which is harmful and also is seldom utilized nowadays. The very best and also most dependable way to check for diamonds is to use testers that use thermal conductivity. These testers contain battery powered thermistors installed with a retractable copper tip. This tester functions by infusing the warm into the tested stone and also after that the tool gauges the amount of heat that it carries out. Nevertheless thermal conductivity testers works best to identify diamonds and also its various other simulants, it will not assist differentiate lab developed or artificial stones. To be able to determine these, particular optical techniques are required. Laboratories make use of strategies such as spectroscopy, microscopy as well as luminescence in order to establish a particular rocks origin. The typical individual could make use of loupes and microscopic lens to differentiate synthetic stones. Natural rubies typically have minor blemishes and imperfections such as additions or some kind of international material, which will certainly not be found in synthetics.
Quality Enhanced Diamonds - Some Points You Required to Know!
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.