5 Tips on What To Look For When Buying Diamonds For Wedding Rings
A wedding, or an engagement in Maryland, is one of the most important events in every couple’s life. One of the best ways of making the experience memorable is by choosing the right ring to symbolize the love you have for one another. While most couples would like to get the most beautiful ring they can lay their hands on, budgetary restrictions can be a challenge. However, it is possible to find an ideal ring based on your budget.
For anyone looking for precious diamonds for engagement rings and wedding rings in Maryland, they should consider going about the process carefully. There are various dealers in the market, some of who may sell you fake diamonds. Here are a few useful tips on what to look for when looking for precious diamonds for engagement or wedding rings.
Consider the Diamond Cut
1. Any expert will tell you that the cut is the most important thing to consider when buying diamonds in Maryland. The main reason behind this is that the cut usually influences the sparkle. A diamond may be clear and feature a high quality color grade, but if the cut is poor, it may still appear dull. The dealer you buy from should be able to cut your diamond in the proper proportions. If your budget can allow it, choose a diamond with the highest cut grade.
2. Contrary to common belief, lack of color in your diamonds denotes a higher color grade. Some people go for pale yellow diamond, without knowing that it is low quality. To avoid such an experience, ask the diamond dealer to give you grade H or higher. Near colorless diamond ranges from grade G to J, but it may be quite expensive.
Clarity Diamonds can also be chosen based on their clarity levels.
3. This is usually not a very important factor to consider, considering that the precious stones usually come with imperfections, known as inclusions. These tiny imperfections may not be easy to detect, and they may only be seen through a microscope. However, the fewer there are, the higher the clarity grade of your diamonds. If your budget can be stretched further, consider buying grade VS1 grade or higher.
Consider the Diamond’s Carat Weight
4. Unlike common belief, carat does not mean the size of the diamond, but its actual weight. Carat and cut must be considered side by side, because no matter the size of the diamond, a poor cut grade can make your precious stones look smaller. Another important fact to keep in mind is that the more the weight of the diamond, the more you will pay for it. Therefore, you should consider going for a less heavy stone with a high grade cut.
Ask for Proof of Certification
5. There is nothing as unfortunate as buying diamonds for your special event only to realize that they are of poor quality, or that they were stolen. To avoid such an eventuality, always ask the dealer in Maryland to show you the copy of diamond certification.
With these tips, you should be able to make the right choice when buying precious diamonds in Maryland for you engagement or wedding.
Maryland How to Buy a Diamond And The 4 Biggest Mistakes When Buying a Diamond
In an ideal world with unlimited budgets and an infinite supply of diamonds, everyone would have beautifully cut "D Flawless" diamonds. In the real world every diamond is unique. There are plenty of gorgeous diamonds to go around - you just need to know how to find one. Choosing a diamond is about balancing several factors to make the most of your budget. Each factor contributes to the beauty and prestige of your diamond. I will explain these factors so you will be prepared to make an informed decision about your diamond purchase.
FACTOR 1: CARAT WEIGHT
People often use the word Carat when discussing how big a diamond is, however "Carat" actually refers to the weight of a diamond. There is no rule as to what carat weight you should buy, but you'll doubtless have heard that "bigger is better." If you ask me, I think bigger is great but you shouldn't forget about the other aspects of a diamond's quality.
A useful tip: if you're looking at Certified Diamonds, you may find it valuable to compare the diameters of different diamonds. Since every diamond is individually cut, some may appear larger than others of the same weight.
FACTOR 2: SHAPE
Approximately 75% of diamonds sold worldwide are Round Brilliants. Rounds diamonds are the most popular, most brilliant, and most expensive. If you are purchasing a diamond as a surprise, Round Brilliant is generally your safest bet.
There is no real hierarchy of shapes being better or worse - it is truly a matter of personal preference. Princess Cuts are the second most popular, and a classic alternative to round diamonds. Cushion Cuts are trendy and have a beautiful vintage look. If you want something different but not too crazy, try an Oval Cut, Asscher Cut, or Radiant Cut diamond.
While no shape is better, there are some significant differences between shapes. Take for example, the radiant cut vs the emerald cut. Though they are a similar shape, the extra facets of the radiant cut give it additional fire and sparkle. If you prefer the emerald cut's understated elegance, consider that it's easier to spot any imperfections and select a higher clarity grade.
Another tip: Diamonds (even round diamonds) may not be perfectly symmetrical. It's nothing to worry about if your diamond's width does not precisely match its height, but if your diamond is much longer than it is wide it may not be what you're expecting. This is especially the case in shapes like Cushion and Oval, where a more asymmetrical diamond might look "skinny", with much of the fire and brilliance concentrated at the ends.
FACTOR 3: CUT
"Cut" refers to a diamond's finish and proportions, and is critical in determining its beauty. Getting the angles right ensures a beautiful diamond that's full of life. In many cases it can be more difficult to spot flaws in a fiery, brilliant diamond. Cut is generally graded in five categories: Poor, Fair, Good, Very Good, and Excellent. Excellent is the highest graded awarded by GIA (whereas other labs may use terms like "ideal" or numbers like "0"). If you want to play safe, stick to "Very Good" and "Excellent" cuts when you choose your diamond.
FACTOR 4: CLARITY
Almost all diamonds have naturally¬ occurring features called "inclusions." Inclusions form as the diamond crystallizes deep underground, and they are unique to each diamond. They take many different forms, and can help you identify a diamond as your own. However, large and prominent inclusions can detract from the beauty of a diamond.
There are many different types of inclusions, and not all are created equal. If your diamond certificate has an "inclusion map," check where the inclusions are. Try to find a diamond with inclusions near the edge where they will be masked by sparkle or hidden by the setting of your diamond. If your budget is limited, I recommend buying "SI" clarity or better. "SI" stands for "Slightly Included." With close inspection you can usually spot the inclusions in an SI¬ graded diamond, but these inclusions will most likely not be visible once your diamond is set in jewellery. If you want to be sure your diamond will look "eye clean", even up close, I recommend selecting a VS2 clarity diamond or better. "VS" stands for "Very Slight Inclusion," and imperfections in VS clarity stones are rarely seen by the naked eye.
FACTOR 5: COLOUR
The term "colour" usually refers to how much warm tint is in a diamond. The scale ranges from D (colorless) to Z (very strongly tinted yellow or brown). Pure white diamonds are considered more desirable, and are more expensive. Warmer¬-hued diamonds (such as K, L, and M) are not necessarily less attractive, but they are significantly less valuable.
Conventional wisdom is to select J colour or better. Personally, I love G and H colour diamonds ¬- they hit the "sweet spot" where most people will not notice colour in the diamond unless they're doing a direct comparison. However, an I or J colour diamond that is well cut and has a lot of life can give you a beautiful diamond at a bargain price.
Depending on how they are cut, different diamonds will display colour differently. This is why colour grades are assigned by looking at a diamond upside¬down. Generally, more¬ brilliant diamonds show their colour less than less brilliant diamonds.
FACTOR 6: FLUORESCENCE
Fluorescence has a bad rep, and most of it is unfair. Diamond Fluorescence refers to how a diamond responds when subjected to ultra¬violet light. Fluorescent diamonds can glow any one of several colours, but the most common is blue. In rare cases fluorescence can cause your diamond to have a milky appearance when viewed in direct daylight. This is most often the case with strong or very strong fluorescence and D/E/F colour diamonds.
However, there are many, many more cases where blue fluorescence is a positive thing. Imagine you were shining a blue light on a yellow diamond... the blue tint can make your diamond look whiter. If your diamond falls in the "near colourless," "lightly tinted," or "tinted" range I recommend looking for medium blue or faint blue fluorescence.
Warning: Green, red, and yellow fluorescence are rare, and they will not have the same benefit. If you are interested in a diamond that has strong blue, very strong blue, green, red, or yellow fluorescence, I recommend asking your salesperson to show you your diamond outside in natural daylight. If you're buying online, contact the seller prior to making your purchase so they can examine the diamond first in natural daylight.
FACTOR 7: GRADER
This should always be your first question: Says who? Every diamond grading laboratory has different standards, so comparing diamonds graded by different sources is extremely unreliable. One grader might grade a diamond K SI2, and another might call that same diamond F VS2. I know that sounds crazy, but I see it happen all the time.
The most reputable and consistent grading laboratories are GIA, AGS, IGI, and HRD. GIA is considered the global standard worldwide. AGS is a popular alternative in the U.S.A. while IGI and HRD are more common in Europe.
EGL is tricky because there are EGL labs all over the world, and some of them do a great job while others can be less reliable. We strongly recommend caution when buying an EGL certified diamond unless it's from EGL-¬USA.
Many diamonds are assigned grades by valuation companies and in-¬house graders. If your diamond does not come with a report from a major laboratory, you should always ask where the grader trained. He or she should be certified by a major grading laboratory: GIA, AGS, IGI, or HRD. Be smart and be cautious about reports done by uncertified shop owners, salespeople, or valuation companies.
SELECTING YOUR DIAMOND
You can choose to purchase your diamond online, or from a retail store. If you prefer to purchase your diamond in a retail store, avoid the big chains and shop with smaller independent jewellers. Many independent jewellers are actually significantly less expensive than their large competitors. (You don't have to take my word for it - shop around and you'll quickly learn that this is true). This way you'll buy a better quality diamond and - if you wish - you'll have the opportunity to design your own hand-made engagement ring setting.
If you choose to shop online, I would recommend comparing prices and service across several websites. Be sure that the company ships from your country - otherwise you'll be hit with expensive duty and GST. Always make sure you call or e-mail customer service and have them hand-inspect your diamond before you complete your purchase. Sometimes a diamond may seem like a great deal, but it could have an unfortunate inclusion, asymmetrical cut, or be negatively impacted by fluoresence. And above all, make sure you have an easy and affordable way to return the diamond if it doesn't turn out as you'd hoped. Online shopping is the best way to get a great deal on a diamond for your engagement ring, diamond studs, or pendant - just review this article, be reasonably cautious, and have fun.
What You Had to Know When Getting a Ruby Ring
To begin our feature on various kinds of gems, we will certainly start with the very best as well as most popular gems of them all the diamond. The ruby is the best gems. It has few weaknesses and lots of strengths. It glows with its amazing value and sentimental value. It is used in wedding event rings to stand for endless love or utilized as gifts/jewelry to be offered to loved ones. Yet the diamond is a lot greater than its everlasting appeal.
The ruby acquires its name from the Greek job adamas meaning unsurpassable. In solidity, there is no comparison. The ruby prices in the Mohs scale a 10 which is the hardest material in the world. Its reducing resistance is 140 times that of the ruby as well as sapphire, the gems(Corundum) that are next in the Mohs scale in hardness. The diamond's optical homes such as appeal and rigidness make it one-of-a-kind as well as easily distinguished from other replicas. Enjoy!
* Background of Diamonds
The initial videotaped ruby days back around 800 B.C. in India. Some think it even dated back 6,000 years ago. The rubies were used as attractive objectives as well as also as amulets to fend off bad and also give protection in battle. During the Dark Ages, diamonds were also specified to be utilized as a clinical aid. Religious physicians even told people that if they hold a diamond in a hand as well as make the indication of the cross would certainly, it would certainly treat and health problem as well as heal wounds.
Diamonds ended up being extra preferred throughout the 19th century as a result of discovery of ruby deposits in South Africa. This exploration brings about enhanced supply, improved reducing and brightening methods, as well as growth in economic situation. In 1979, geologists discovered the Argyle pipeline in Australia which to this date is the wealthiest diamond deposit in the globe. Argyle, since after that, alone is liable for providing over one third of the globe's diamonds yearly.
* Diamonds: Just how are they created?
Diamonds contains an allotrope of carbons that are formed in high-pressure, high-temperature conditions. Rubies are generated 90 miles under the Planet's surface at temperature levels of concerning 2200 degrees Fahrenheit. Diamonds are created deep within the planet and also eventually, over extremely extended periods of time, push their means to the earth's surface, normally via volcanic eruptions.
The age of these diamonds from underneath the surface area of the earth are from 1 to 3.3 billion years old! When diamonds are created and begin their climb to the planet's surface area, they experience networks where the magma from the volcano climbs to the surface area, grabbing diamonds in the process and also ultimately depositing them externally, where they are ultimately discovered and also extracted.
* The 4 C's of Diamonds
There are four unique qualities that identify the value and also high quality of a diamond. These are the color, cut, quality as well as carat. Or else referred to as the 4 C's of a ruby. In the following, we will speak about these attributes carefully.
In the last newsletter, we touch based on the shade of gems as being one of the most important feature due to that color is one of the most evident function. The excellent ruby should show up clear as well as colorless however this is not the case for all rubies. Diamonds can come in any kind of shade of the rainbow most usual shade is a shade of yellow or brownish. The Geological Institute of The U.S.A.(GIA) have devised a guideline to grade ruby color. This guideline is composed of a lettering system that varies from the alphabet D - Z. Please see below:
D E F No Shade G H I J Nearly Colorless K L M Faintly colored, can not rarely be seen and also typically yellow in shade N O P Q R Lightly tinted, typically yellow. Could be seen with the nude eye S T U V W X Y Z Tinted, begins with yellow and also advances to brown
The cut a ruby is established by the diamond's proportion such as its shape, size and also depth. The cut determines exactly what is called the diamond's "sparkle". Also if the ruby itself has ideal color and also clarity, with an inadequate cut the diamond will certainly have a plain luster. This is since the cut determines exactly how light journeys within the ruby. The Gemological Institute of The U.S.A. has also devised a quality grading system to rank diamond clarity. This grading system consists of Remarkable (Fl), Inside Flawless (IF), Really Extremely Slightly Included (VV1 or VV2), Very Slightly Included(VS1 or VS2), Somewhat Included(SI1 or SI2), and also Consisted Of(I1, I2, and also I3). Although this system had been added to the ruby industry, it is not commonly utilized. This is due to the truth that it took a great deal of practice and training to integrate it.
The cut a diamond is established by the diamond's proportion such as its form, width as well as depth. The cut determines what is called the diamond's "luster". Also if the ruby itself has ideal color and clarity, with a poor cut the diamond will certainly have a boring radiance. This is since the cut determines how light journeys within the diamond.
There are 3 sorts of cuts that can figure out the ruby's luster. These are a superficial cut, a cut that is unfathomable as well as ideal cut. A superficial cut is a cut of a diamond that is as well reduced, that light traveling through it is shed on the base of the rock as well as does not come back into sight. This cut makes a ruby appear drab as well as plain. A cut that is also deep is a cut that is too expensive, that light traveling through it leaves through the sides and also darkens the stone. A perfect cut is an ideal cut on a diamond that mirrors light to the top of the stone, giving it best brilliance.
* Carat weight
As specified on the last e-newsletter, a solitary carat weight(ct) considers about 200 milligrams or.2 grams. For smaller sized carat rubies that evaluate less than a carat weight, it is shared as points (pt). Points are 1/100 of a carat. Carat weight of a ruby is necessary as a result of that bigger rubies are rarer compared to smaller sized ones, so generally the bigger the diamond the more expensive it is. There is no standard grading system or diagram that could show various carat weight. This is because there are so numerous variants of rubies in form and also cut, makings stones of comparable weight, look different.
* Replica Diamonds
Given that rubies are the most useful and also rarest of all the gemstones, efforts have been made to duplicate or even improve rubies making use of much less costly alternatives. A great deal of times, truthful errors have actually been made as well as these choices or various other gems such as spinel were in some cases perplexed with genuine diamonds. In many cases, some unethical individuals attempt to offer these alternatives to misfortunate customers in order to profit. Below we will discuss concerning these alternatives and means to identify them.
* Synthetic Diamonds
Synthetic rubies are rubies that are expanded manufactured in a research laboratory. The initial well-known cases of ruby synthesis were claimed to be documented in between 1879 - 1928, however this was never ever confirmed. It wasn't up until the 1940's where study began in the USA, Sweden, Soviet Union started looking into. Synthetic rubies are or else referred to as High Pressure Heat (HPHT) rubies or Chemical Vapor Deposit (CVD) rubies. The name of both these synthetic diamonds stems from the procedures made use of to produce them. A few of these artificial diamonds might either have better, lesser or comparable qualities than that of a ruby. For that reason, these artificial diamonds are made use of for abrasives, cutting and polishing devices, as well as switches in power plant.
Simulants are non-diamond compounds that are used to replicate the appearance or even the shape of a ruby. The most basic as well as popular simulant is cubic zirconia (CZ). CZ at ordinary sight could shimmer even more compared to a diamond as well as it is much less dense, meaning that a 1 carat CZ will certainly be a lot larger compared to a 1 carat ruby. Nowadays, a more preferred simulant is moissanite, which has just the same attributes of a diamond. These features include hardness (Moissanite-9.25 and diamond-10 in Mohs scale), refractive index(Moissanite -2.65 and also diamond -2.42) and dispersion (Moissanite -.104 and also diamond -.044). This makes it tough to set apart both at plain view and also would certainly frequently require testers to discriminate. In the next section we will review ways to determine moissanites as well as other replicas.
* Real or Phony?
An old method of determining diamonds is to do a scrape test. This requires scraping a diamond with another diamond which is harmful and is seldom made use of nowadays. The very best as well as most reputable way to test for rubies is to utilize testers that make use of thermal conductivity. These testers contain battery powered thermistors placed with a retractable copper suggestion. This tester functions by infusing the warmth into the checked rock and afterwards the device gauges the amount of heat that it carries out. However thermal conductivity testers functions best to identify diamonds as well as its various other simulants, it will certainly not help distinguish laboratory created or artificial rocks. To be able to determine these, specific optical techniques are needed. Laboratories make use of strategies such as spectroscopy, microscopy as well as luminescence in order to establish a particular stones beginning. The ordinary person could utilize loupes and microscopic lens to differentiate synthetic stones. Natural rubies generally have small flaws and defects such as inclusions or some kind of foreign product, which will not be found in synthetics.